Manual de instrucciones de Linear SP1024

Resumen del contenido incluido en la página 1

PRINTER’S INSTRUCTIONS:
INSTR,INSTL,SP1024 - FILE NAME: P502 - INK: BLACK - MATERIAL: 20 LB. MEAD BOND - SIZE: 8.500” X 11.000” - SCALE: 1-1 - SIDE: 1 OF 2
Solar Panel Installation
Step 1: Slide the 1/4” bolts (F) through the bottom of each channel
so the threaded part of each bolt comes through top of frame,
position the pipe (D) between the bolts and place two clamps (C)
over the curved pipe onto the bolts. The clamp at the top of the
solar panel should fi t over the pin on the curved pipe.

Resumen del contenido incluido en la página 2

PRINTER’S INSTRUCTIONS: INSTR,INSTL,SP1024 - FILE NAME: P502 - INK: BLACK - MATERIAL: 20 LB. MEAD BOND - SIZE: 8.500” X 11.000” - SCALE: 1-1 - SIDE: 2 OF 2 Multiple Panel Installations HINTS for Obtaining Maximum Output from Your Solar Panel 1. Place the panel facing due south NOTE: All connections should be weather proofed using weather in the path of the sun, where full proof splice kits available at hardware and electrical supply stores. sun will strike its face throughout the day (minimu