Resumen del contenido incluido en la página 1
CHAPTER
2
Configuring the Cisco Unified IP Phone for
MIDlets
Revised: January 2012, OL-21851-01
Contents
This chapter describes how to configure and manage the Cisco Unified IP Phone and the Enhanced
Phone User Interface that uses Java MIDlets on the Cisco Unified IP phone.
This chapter contains the following information:
• Important Notes, page 2-1
� Configuring the Cisco Unified IP Phone, page 2-2
� Uploading Files to the Unified CM TFTP Directory, page 2-15
� Creating MIDlets IP Phone Se
Resumen del contenido incluido en la página 2
Chapter 2 Configuring the Cisco Unified IP Phone for MIDlets Configuring the Cisco Unified IP Phone Adding a New Phone with MIDlets Capability If you are using Unified CM release 8.0 and wish to enable MIDlets features on new phone installations, you must first enable Web Access. Web Access is not enabled by default; it must be enabled manually in the Web Access field of the Product Specific Configuration Layout window. Configuring the Cisco Unified IP Phone Use the information in thi
Resumen del contenido incluido en la página 3
Chapter 2 Configuring the Cisco Unified IP Phone for MIDlets Configuring the Cisco Unified IP Phone Managing Cisco Unified IP Phones Before You Begin Before starting the following procedure, note the MAC address of the Cisco TelePresence phone device. See the Before You Begin section for information about determining the MAC address. Note You must restart your system after you have completed the configuration tasks in this section. Use the tasks in this section to configure the Cisco
Resumen del contenido incluido en la página 4
Chapter 2 Configuring the Cisco Unified IP Phone for MIDlets Configuring the Cisco Unified IP Phone Note Assign the same directory number that is assigned to the Cisco TelePresence device to the Cisco Unified IP Phone 7970 Series. Note The “Required” column in the table reflects fields marked with an asterisk ( * ) in the administration interface, which are required entries for basic configuration. Table 2-1 Cisco Unified IP Phone 7970 Series Device Information Field Required? Setting
Resumen del contenido incluido en la página 5
Chapter 2 Configuring the Cisco Unified IP Phone for MIDlets Configuring the Cisco Unified IP Phone Table 2-1 Cisco Unified IP Phone 7970 Series Device Information (continued) Field Required? Setting Phone Button Template Yes Standard_7975 SIP. Note Unless you have created extra button templates, you will see the default button template for your device. Softkey Template — Common Phone Profile Yes Standard Common Phone Profile. Calling Search Space — AAR Calling Search Sp
Resumen del contenido incluido en la página 6
Chapter 2 Configuring the Cisco Unified IP Phone for MIDlets Configuring the Cisco Unified IP Phone Table 2-1 Cisco Unified IP Phone 7970 Series Device Information (continued) Field Required? Setting Always Use Prime Line for Voice Yes Default. Message Calling Party Transformation CSS — Geolocation — Check-Boxes Use Device Pool Calling Party — Box is checked. Transformation CSS Ignore Presentation Indicators Box is unchecked. Retry Video Call as Audio Box is checked. Allow
Resumen del contenido incluido en la página 7
Chapter 2 Configuring the Cisco Unified IP Phone for MIDlets Configuring the Cisco Unified IP Phone Protocol Specific Information Link the Cisco TelePresence device to Cisco Unified Communications Manager phone profiles for the presence group and security-related SIP phone settings using the information in Table 2-2 as a guide. Note The “Required” column in the table reflects fields marked with an asterisk ( * ) in the administration interface, which are required entries for basic con
Resumen del contenido incluido en la página 8
Chapter 2 Configuring the Cisco Unified IP Phone for MIDlets Configuring the Cisco Unified IP Phone Table 2-3 CAPF Settings Field Required? Setting Certificate Operation Yes No Pending Operation. Authentication Mode Yes Leave this field unchanged. Authentication String — Key Size (Bits) Yes Operation Completes By Optional Certificate Operation Status — Note Security Profile Contains Additional CAPF Settings. See the “Phone Security Profile CAPF Information” section on page 1-30.
Resumen del contenido incluido en la página 9
Chapter 2 Configuring the Cisco Unified IP Phone for MIDlets Configuring the Cisco Unified IP Phone � Leave fields in the External Data Locations Information table blank to use the default settings. Tip Be careful when typing URLs to avoid typos. External Data Location Settings for CTS Release 1.6 and Earlier Table 2-5 External Data Location Settings for CTS Release 1.6 and Earlier Required Required for Field Non-MIDlets MIDlets Setting Information — Yes Leave blank to use the default.
Resumen del contenido incluido en la página 10
Chapter 2 Configuring the Cisco Unified IP Phone for MIDlets Configuring the Cisco Unified IP Phone External Data Location Settings for CTS Release 1.7 and Later Note CTS Release 1.7 and later releases require that your system be running MIDlets. Table 2-6 External Data Location Settings for CTS Release 1.7 and Later Field Setting Information Leave all fields blank to use the default. Directory Note Default settings that were configured in the Enterprise Parameters Configuration. Messa
Resumen del contenido incluido en la página 11
Chapter 2 Configuring the Cisco Unified IP Phone for MIDlets Configuring the Cisco Unified IP Phone Table 2-7 Cisco Unified IP Phone 7970 Series Extension Information Field Required? Setting Check-Box — Leave box unchecked. Enable Extension Mobility Log Out Profile — Current Device Settings. Log in Time — Log Out Time MLPP Information Leave the multilevel precedence and preemption information (MLPP) Domain field as . Do Not Disturb Table 2-8 describes fields found in the Do
Resumen del contenido incluido en la página 12
Chapter 2 Configuring the Cisco Unified IP Phone for MIDlets Configuring the Cisco Unified IP Phone Table 2-10 Product Specific Configuration Layout Fields Field Required? Setting Check-Box — Leave the box checked (speakerphone disabled) unless you are using the One Phone Per Office Disable Speakerphone feature. Note The speakerphone must be enabled (Disable Speakerphone box unchecked) to initiate the One Phone Per Office feature. See the “One Phone Per Office” section on page 6-5
Resumen del contenido incluido en la página 13
Chapter 2 Configuring the Cisco Unified IP Phone for MIDlets Configuring the Cisco Unified IP Phone Table 2-10 Product Specific Configuration Layout Fields Field Required? Setting Load Server — Leave field blank. Recording Tone Yes Disabled. Recording Tone Local Volume Yes Leave default setting. Recording Tone Remote Volume Yes Leave default setting. Recording Tone Duration — Leave field blank. Display On When Incoming Call Yes Disabled. RTCP Yes Disabled. “more” Softkey Timer — Leave d
Resumen del contenido incluido en la página 14
Chapter 2 Configuring the Cisco Unified IP Phone for MIDlets Configuring MIDlets Table 2-10 Product Specific Configuration Layout Fields Field Required? Setting Switch Port Remote Configuration Yes Disabled. PC Port Remote Configuration Yes Disabled. Automatic Port Synchronization Yes Disabled. SSH Access Yes Disabled. 80-bit SRTCP Yes Disabled. Configuring MIDlets To use the Enhanced Phone User Interface (MIDlets), your Cisco Unified IP Phone 7970 Series must be configured to run a ne
Resumen del contenido incluido en la página 15
Chapter 2 Configuring the Cisco Unified IP Phone for MIDlets Configuring MIDlets Uploading Files to the Unified CM TFTP Directory Use the information in the following sections to upload files to the Unified CM TFTP Directory: � Downloading Cisco TelePresence MIDlet Phone Application .jad and .jar Files from Cisco.com, page 2-15 � Uploading Cisco TelePresence MIDlet Phone Application .jad and .jar files to Unified CM, page 2-15 Tip When downloading MIDlet .jad and .jar files, use cauti
Resumen del contenido incluido en la página 16
Chapter 2 Configuring the Cisco Unified IP Phone for MIDlets Configuring MIDlets Step 4 Click Add New to enter new file information using the fields provided. See the “Adding a New Phone” section on page 2-2. Step 5 Upload the Cisco TelePresence MIDlet Phone Application .jad and .jar files to the Unified CM TFTP directory by following these steps: a. From the Navigation drop-down menu in the upper right corner, choose Cisco Unified OS Administration and click Go. b. Log in to Cisco
Resumen del contenido incluido en la página 17
Chapter 2 Configuring the Cisco Unified IP Phone for MIDlets Configuring MIDlets c. Service Description—MIDlet UI. d. Service URL—Required. IP address of the Service URL must be that of the Unified CM and in the following format: http://xx.xx.xx.xx:6970/TSPM-y-y-y-YY.jad Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System OL-21851-01 2-17
Resumen del contenido incluido en la página 18
Chapter 2 Configuring the Cisco Unified IP Phone for MIDlets Configuring MIDlets The following describes the necessary Service URL content: – xx.xx.xx.xx is the IP address of the Unified CM server. – y-y-y- is the version of the MIDlet application being added to Unified CM. – YY is the build version of the MIDlet application being added to Unified CM. e. Service Category—Required. Choose Java MIDlet from the drop-down menu. f. Service Type—Required. Choose Standard IP Phone Service. g.
Resumen del contenido incluido en la página 19
Chapter 2 Configuring the Cisco Unified IP Phone for MIDlets MIDlets Troubleshooting Tips Note If you are upgrading from an older XML specification identifier (XSI) user interface to MIDlets, you must reset the phone and reset the CTS to allow the Java MIDlets application to work with the Cisco Unified IP Phone. See the “Managing Phone Reset and Codec Connectivity” section on page 4-13 for reset information. Setting Phone URL Parameters for MIDlets Make sure the default services URL
Resumen del contenido incluido en la página 20
Chapter 2 Configuring the Cisco Unified IP Phone for MIDlets Configuring a Remote Phone Configuring a Remote Phone To configure the system to use your CTS Cisco Unified IP phone remotely: Step 1 Log in to the Cisco Unified CM Administration interface. Step 2 Navigate to Device > Phone and use the search fields to find the phone you wish to use remotely. Step 3 Write down the IP Address of your phone and CTS, and click the link under Device Name (Line) of your phone, circled in red in
