Resumen del contenido incluido en la página 1
Avaya 1100 Series
Expansion Module for
SIP Software User Guide
Communications Server
Document Status: Standard
Document Version: 02.01
Part Code: NN43110-301
Date: August 2010
Resumen del contenido incluido en la página 2
© 2010 Avaya Inc. All Rights Reserved. Notices While reasonable efforts have been made to ensure that the information in this document is complete and accurate at the time of printing, Avaya assumes no liability for any errors. Avaya reserves the right to make changes and corrections to the information in this document without the obligation to notify any person or organization of such changes. Documentation disclaimer Avaya shall not be responsible for any modifications, additions, or deletio
Resumen del contenido incluido en la página 3
Contents Contents Regulatory and safety information . . . . . . . . . . . . . . . . . . . . 5 Other . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 DenAn regulatory notice for Japan . . . . . . . . . . . . . . . . . . . . . . 7 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Features . . . . . . . . . . . . .
Resumen del contenido incluido en la página 4
Contents 4
Resumen del contenido incluido en la página 5
Regulatory and safety information Regulatory and safety information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
Resumen del contenido incluido en la página 6
Regulatory and safety information 装置がラジオやテレビジョン受信機に近接して使用されると、受信障害を引き起こすこと があります。 取扱説明書に従って正しい取り扱いをして下さい。 Table 1 lists EMC compliance for various jurisdictions. Table 1: EMC compliance Jurisdiction Standard Description United States FCC CFR 47 Part Class B Emissions: FCC Rules for Radio 15 Frequency Devices Canada ICES-003 Class B Emissions: Interference-Causing Equipment Standard: Digital Apparatus Australia/New AS/NZ CISPR22 Class B Emissions: Information technology Zealand CISPR 22
Resumen del contenido incluido en la página 7
Regulatory and safety information DenAn regulatory notice for Japan 7
Resumen del contenido incluido en la página 8
Regulatory and safety information 8
Resumen del contenido incluido en la página 9
Introduction Introduction This document describes the Avaya 1100 Series Expansion Module with SIP Software and how to use it with the IP Deskphone. Description The Avaya 1100 Series Expansion Module (SIP Firmware) is supported on the following IP Deskphones: • Avaya 1120E IP Deskphone • Avaya 1140E IP Deskphone • Avaya 1165E IP Deskphone The Expansion Module is a hardware accessory that connects to the IP Deskphone and provides additional line appearances and feature keys. Up to three modules
Resumen del contenido incluido en la página 10
Introduction Figure 1: Avaya 1100 Series Expansion Module Features The Avaya 1100 Series Expansion Module has the following features: • The IP Deskphones can have up to 54 additional feature keys when three Expansion Modules are added. • A desk-mounted bracket and structural baseplate support the connection of an Expansion Module o an IP Deskphone or to another Expansion Module. • IP Deskphone and Expansion Module combination can be wall- mounted using the wall mount template provided. • Powe
Resumen del contenido incluido en la página 11
Introduction Note: If the IP Deskphone is powered using PoE (Power over Ethernet) the backlight of the Expansion Modules is disabled. • The Expansion Module displays similar graphics for the key label and icons as are displayed on the main IP Deskphone. • Programmed keys are stored in the user profile. You can maintain your list of programmed feature keys. You can program the feature keys as: — 1. Speed Dial — 2. Presence — 3. Send IM — 4. Call Forward — 5. Do Not Disturb • You can automatic
Resumen del contenido incluido en la página 12
Introduction Module has a 10-character display label. This label is set automatically, however, you can edit the label using the controls on the IP Deskphone. Adjusting the Avaya 1100 Series Expansion Module display screen contrast To adjust the Avaya 1100 Series Expansion Module screen contrast, press the Prefs context-sensitive soft key, select Display, and select Contrast. Note: Contrast adjustment on the Expansion Module is controlled by the same control the IP Deskphone uses for the ma
Resumen del contenido incluido en la página 13
Introduction The type of power supply to the IP Deskphone controls what is functional on the Expansion Module. The Expansion Module backlight can only light when the local 48V power supply is present. On the other hand, either local 48V power supply or Power over Ethernet (PoE) to the IP Deskphone will power all of the Expansion Module’s other functionality. To have the backlight on for the Expansion Module, the IP Deskphone should be powered by AC global power supply only. Icons The Avaya
Resumen del contenido incluido en la página 14
Setup and assembly Setup and assembly The Avaya 1100 Series Expansion Module mounts on the right side of the IP Deskphone. The Expansion Module snaps into the Accessory Expansion Module (AEM) on the back of the IP Deskphone using the desk-mount bracket and structural baseplate supplied with the Expansion Module. Installing the Avaya 1100 Series Expansion Module Use the following instructions to install the Avaya 1100 Series Expansion Module. CAUTION Damage to Equipment To avoid damaging t
Resumen del contenido incluido en la página 15
Setup and assembly 1. Press the tilt lever to adjust the stand angle on the IP Deskphone. You can adjust the stand angle to maximum, instead of removing the stand. See Figure 2. Figure 2: Adjusting the stand angle on the IP Deskphone Accessory Expansion Module (AEM) Port Tilt Wheel Lever Clamp 2. At the back of the IP Deskphone, remove the rubber plug from the AEM port. Place the connecting arm of the Expansion Module behind the IP Deskphone and align the Expansion Module connection plug t
Resumen del contenido incluido en la página 16
Setup and assembly Figure 3: Connecting the Expansion Module 4. If connecting a second, or a third Expansion Module, repeat steps 2 to 4. Note: The second Expansion Module is attached to the right side of the first Expansion Module. The third Expansion Module is attached to the right side of the second Expansion Module. 5. Adjust the height of the IP Deskphone tilt adjustment to a comfortable viewing angle. Then adjust each of the Expansion Module footstands so they are flush to the desk s
Resumen del contenido incluido en la página 17
Setup and assembly Avaya 1100 Series Expansion Module startup initialization After the Avaya 1100 Series Expansion Module is installed and powered up on the IP Deskphone, the Expansion Module initializes. Table 2 on page 17 lists the initialization process for the Expansion Module. Table 2: Initializing Expansion Module (Part 1 of 2) Phase Description Expansion The self-test confirms the operation of the Module performs Expansion Module local memory, CPU, and other self-test circuitry. Whil
Resumen del contenido incluido en la página 18
Setup and assembly Table 2: Initializing Expansion Module (Part 2 of 2) Phase Description Software The Expansion Module software is distributed upgrade together with the IP Deskphone software as a part of the application. When the IP Deskphone detects a new Expansion Module, the software version of the Expansion Module is compared to the version of the Expansion Module software stored on the IP Deskphone. If the software of the Expansion Module is different, the IP Deskphone version of t
Resumen del contenido incluido en la página 19
Setup and assembly The Expansion Module is tightened by turning the wheel clockwise and loosened by turning the wheel counter-clockwise. Turn the wheel clockwise on the back right side (if viewed from the front) of the Expansion Module to loosen the stand hinge. Adjust the angle of the IP Deskphone using the tilt lever. When the IP Deskphone is set to a preferred angle, turn the wheel counter-clockwise on the back of the Expansion Module to tighten the stand hinge and lock the stand at the
Resumen del contenido incluido en la página 20
Avaya 1100 Series Expansion Module programming Avaya 1100 Series Expansion Module programming When an Avaya 1100 Series Expansion Module is installed on an IP Deskphone, the controls and settings of the IP Deskphone control the IP Deskphone and the Expansion Module. For more information about controls, settings, and programming of your Expansion Module through your IP Deskphone, see your IP Deskphone User Guide: • Avaya 1120E IP Deskphone with SIP Software User Guide (NN43112-110) • Avay
