Resumen del contenido incluido en la página 1
Model 8560/8660
User Guide
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
QUICK REFERENCE GUIDE TO FREQUENTLY USED FEATURES These are the basic instructions for the most frequently used telephone and voice mail features for Inter-Tel endpoints. For detailed information about these and other features, refer to the complete instructions in the appropriate user guide. PLACING AN INTERCOM CALL 1. Dial an extension number. 2. If your call goes through handsfree to the called endpoint’s speaker, speak after you hear a double tone. If you hear continuous ringing, wait for th
Resumen del contenido incluido en la página 4
PLACING A CONFERENCE CALL CNF 1. While on the first call, press . The call is now on hold. 2. Place an intercom or outside call, then press the flashing CNF button to place the call on hold. (If necessary, repeat this step to place a third call on hold.) 3. Press the flashing CNF button to join all of the calls together in the con- ference. NOTE: Conference calls are limited to three parties on SIP endpoints. FORWARDING CALLS 1. Press . (Six-line display model users must then select a menu butto
Resumen del contenido incluido en la página 5
PAGING 7 1. Lift the handset and press PAGE or dial . 2. Dial the desired page zone number (0-9). 3. After the tone, make your announcement and hang up. NOTE: The Page feature is not supported in SIP mode. TRANSFERRING A CALL TO AN EXTENSION/OUTSIDE NUMBER 1.Press or . TRANSFER XFR 2. Dial the desired extension or telephone number. 3. Wait for an answer, announce the call, and then hang up. If the number is busy, there is no answer, or the transfer is refused, press , SPKR , or the flashing bu
Resumen del contenido incluido en la página 6
ACCESSING VOICE MAIL MESSAGES 1. Access your mailbox as described on page 3. 1 2. If E-Mail Reader is enabled for your mailbox, say “Voice Mail” or press . If E-Mail Reader is not enabled for your mailbox, skip this step. 3. Select one of the following: 1 • Say “New” or press to listen to new messages. 3 • Say “Saved” or press to listen to saved messages. 4. While you are listening to a message, you can use the following options: # • Say “Skip” or press to skip to the end of the recording
Resumen del contenido incluido en la página 7
MESSAGE OPTIONS* TELEPHONE SYSTEM AND FEATURE CODES* Below is a summary of the options you can CODE FEATURE NAME CODE FEATURE NAME VOICE MAIL FEATURE GUIDE 391 Account Code – All Calls 324 Hunt Group Remove/Replace use when accessing messages, after playing 390 Account Code – Optional 303 LCD Contrast Control USING VOICE MAIL messages, and when recording voice mail 326 ACD Agent Log In 365 Message To access your mailbox: messages. 327 ACD Agent Log Out 366 Message - Cancel Msg Left 1. Dial the
Resumen del contenido incluido en la página 8
To turn on Do-Not-Disturb: REMOTE FEATURE ACCESS DIALPAD CHARACTERS 3 7 0 1. Enter . Remote Feature Access allows you to change NUMBER OF TIMES BUTTON IS PRESSED BUTTON 12345 your station password, place your endpoint in 2. Enter message number 01-20 (see the 1 -& ( ) 1 Do-Not-Disturb mode, and forward calls from default DND message list below). 2 AB C ' 2 another endpoint or through a special dial-up 3. If desired, enter the optional second-line 3 DE F ! 3 line. 4 GH I * 4 message text (s
Resumen del contenido incluido en la página 9
Notice ® This Inter-Tel user guide is released by Inter-Tel, Inc. as a guide for end-users. It pro- vides information necessary to use the Model 8560 and 8660 IP endpoint. The contents of this user guide, which reflect current Inter-Tel standards, are subject to revision or change without notice. Some features or applications mentioned may require a future release and are not available in the initial release. Future product features and applications are subject to availability and cost. Some fe
Resumen del contenido incluido en la página 10
PRODUCT DISPOSAL INSTRUCTIONS This symbol indicates that the product is classified as electrical or electronic equipment and should not be disposed of with other com- mercial or household waste at the end of its working life. For appro- priate disposal and recycling instructions, contact your local recycling authority or Inter-Tel provider. The Waste of Electrical and Electronic Equipment (WEEE) Directive (2002/96/EC) was established by the European Union to minimize negative impact on the envir
Resumen del contenido incluido en la página 11
FINDING YOUR WAY GETTING STARTED MOVING ON USING E-MAIL READER LEARNING MORE Table of Contents CONTENTS PAGE FINDING YOUR WAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Welcome. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 12
CONTENTS PAGE MOVING ON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Setting Endpoint Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Setting Mailbox Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 13
FINDING YOUR WAY Finding Your Way SECTION CONTENTS PAGE Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 About Your Endpoint. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Model 8560/8660 Connectors . . . . . . . . . . . . . . . . . . . . . . . . . 4 IP Endpoint Exceptions . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 14
WELCOME Your new Model 8560 digital or 8660 IP endpoint provides access to several features, each of which is described in this guide. The About This Guide section below lists the different sections in this user guide and describes the type of information you can find there. If you need to access information quickly, refer to the Quick Reference Guide attached to the front of this guide. You can also tear out the pocket guide to keep as a handy reference for features you are likely to use while
Resumen del contenido incluido en la página 15
FINDING YOUR WAY ABOUT YOUR ENDPOINT Your Model 8560/8660 endpoint has three basic types of buttons in addition to a dis- play and a Message Indicator lamp. • Dialpad buttons: Allow you to enter numbers and letters. • Feature buttons: Provide quick access to various telephone and voice mail fea- tures. • Liquid Crystal Display (LCD) menu buttons: Allow you to scroll through dis- plays and make selections based on the active feature. Message Indicator Lamp Internal Speaker LCD With Six LCD Men
Resumen del contenido incluido en la página 16
Model 8560/8660 Connectors The Model 8560 digital and 8660 IP endpoints have jacks and ports (Model 8660 only) on the back used for various connections. The back of the Model 8560 has jacks for headset and handset connections only. Because the Model 8560 is a digital end- point, it does not include the PC and power connectors included on the Model 8660. The Model 8660 IP endpoint has additional power and PC connectors that are required for an IP endpoint. Two light-emitting diodes (LEDs) on the
Resumen del contenido incluido en la página 17
FINDING YOUR WAY IP Endpoint Exceptions The Model 8660 IP endpoint looks and functions almost identically to the Model 8560. The only exceptions are: • The Model 8660 has additional ports on the back that are used for Internet and power connections (see page 4). • The Model 8660 does not support the DSS/BLF unit (see page 8). • The Model 8660 does not support the Off-Hook Voice Announce feature (see page 23). • The Model 8660 does not support the Enhanced Speakerphone Mode feature (see page
Resumen del contenido incluido en la página 18
Feature Button Functions The feature buttons are designed to automate some of the commonly-used functions, such as dialing an outside number. Each of these is described in the table below. BUTTON IF YOU... YOU CAN... PG. Press ANSWER Answer a call. 22, 25 ANSWER Press and dial the number Place an outgoing call. 24 OUTGOING OUTGOING Press an unlit button or the flashing Select an outside line or answer a 24, 25 CALL CALL button call. Press Access an intercom call. 22 IC IC Press unlit or lit
Resumen del contenido incluido en la página 19
FINDING YOUR WAY LCD and Menu Buttons In addition to the various feature buttons, your endpoint contains a Liquid Crystal Display (LCD) with six different lines. The top two lines show call information and messages; the remaining four lines display a menu, which changes according to the feature you are using. To select an option, press the menu selection button closest to it. If there is only one option on a line, such as DO-NOT-DISTURB, you can press the button on either side. DISPLAY WITH SIX
Resumen del contenido incluido en la página 20
Message Indicator Lamp The Message Indicator lamp (located at the top, right corner of the endpoint) shows MSG the same indications as the button. The Message Indicator lamp flashes when- ever there is a waiting message. NOTE: By default, the message lamp is programmed to light when you receive a new voice mail message. However, this lamp can be programmed for other functions. Check with your system administrator if you are unsure what your endpoint’s lamp is pro- grammed to indicate. DSS/BLF a
