Manual de instrucciones de Verilux VD01

Resumen del contenido incluido en la página 1

VD01

Resumen del contenido incluido en la página 2

IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS ® Thank you for purchasing the Original Natural Spectrum Deluxe Desk Lamp. Please read the following safety information before using. To reduce the risk of fi re, electrical shock, or injury to persons: • Do NOT dismantle. • Do NOT alter power cord. • Turn off/unplug and allow to cool before replacing bulb or cleaning. • For indoor use only. • The lamp is an electrical device. DO NOT USE NEAR WATER GENERAL PRECAUTIONS • Before plugging in t

Resumen del contenido incluido en la página 3

GETTING STARTED Main Parts & Controls E. Polarized Plug A. Lamp Head F. Parabolic Grid Diffuser B. Gooseneck G. Bulb C. Lamp Base H. High/Off/Low Switch D. Power Cord A B D C E Close-up of Lamp Head A G H F 4

Resumen del contenido incluido en la página 4

SET-UP INSTRUCTIONS 1. Attaching the Parabolic Grid Diffuser • Remo ve grid diffuser from protective plastic bag • Inser t plastic pegs at bottom of grid diffuser into openings near bulb socket • Snap tab into place 2. Plug lamp into outlet and turn on; if bulb does not illuminate instantly, please refer to the troubleshooting section of this manual. 5

Resumen del contenido incluido en la página 5

BULB REPLACEMENT INSTRUCTIONS Removal 1. Unplug lamp from power source. C 2. To access to the bulb, remove grid diffuser by depressing the tab and lifting it out. (See page 5) 3. Firmly hold bulb base (B) and pull bulb (C) from the socket (A) in B an outward motion. A Installation 1. Unplug lamp from power source. C 2. Firmly hold base (B) and push bulb (C) into the socket (A). 3. Be sure bulb is fi rmly seated in the socket (see below) and snapped into the metal bulb clip (D). B A 4. Rep

Resumen del contenido incluido en la página 6

CARE & CLEANING Your lamp is made from high quality materials that will last for many years with minimum care. You may want to periodically clean the lamp, using a mild non-abrasive cleaner and soft cloth. When cleaning, make sure you have turned off and unplugged the unit, and allowed suffi cient time for the unit to cool. All liquid should be properly wiped away and dried prior to restoring power. DO NOT USE SOLVENTS OR CLEANERS CONTAINING ABRASIVES, OR AMMONIA BASED CLEANERS Note: All mo