Manual de instrucciones de Apex Digital External Charger

Resumen del contenido incluido en la página 1

External Charger
Ô Ô
Quick Start Guide
Safety
q DO NOT operate the Apex III External Charger in any location which could result in
the unit getting splashed, wet, or immersed in liquid.
q DO NOT tamper or operate the Apex III External Charger if the case is perforated,
broken, or loosely held together.
q DO NOT operate the Apex III External Charger in any outside location where it could
become exposed to the elements. The Apex III External Charger has been designed
for indoor use only.
q DO N

Resumen del contenido incluido en la página 2

Apex III External Charger Quick Start Guide Figure 3: AC Line Cord (120 VAC Cord Shown) 3. Record the Unit Specific Information (External Charger and Power Supply Model and Serial numbers) in a location you will remember for future reference before permanently installing your Apex III External Charger. 4. Plug the female end of your AC Line cord into the Power supply connector (refer to Figure 4). Power Supply AC Line Plug [Power Supply Side] AC Connection Figure 4: Power Supply AC Power Conne

Resumen del contenido incluido en la página 3

Apex III External Charger Quick Start Guide Note: Battery Pack must be placed in the charging slot with Release Clip facing upwards and the four side charging terminals (and ridges) facing outward towards the side of the unit. This orientation applies to the insertion of both Battery Packs (one Battery Pack will be turned the opposite of the other). Battery Pack Release Clip Charging Terminals Figure 7: Battery Pack Orientation External Charger Operation Note: The Apex III External Charger is

Resumen del contenido incluido en la página 4

Apex III External Charger Quick Start Guide Note: Apex III Battery Packs use Nickel Metal Hydride (NiMH) composition, they DO NOT succumb to memory (hysteresis) loss as do Nickel Cadmium (Ni-Cd) batteries. Apex III Battery Packs can therefore be charged while in any state-of- charge and DO NOT require full discharge prior to charging; however, it is still recommended that the Battery Pack be fully discharged periodically to reset the internal gas gauge circuitry. 5. If your Apex III Portable Da