Manual de instrucciones de American Standard Ardsley 4962.150

Resumen del contenido incluido en la página 1

Installation
Instructions
4962.150
ARDSLEY
4962.151
TRADITIONAL VESSEL FAUCET
Thank you for selecting American-Standard...the benchmark
of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin.
Certified to comply with ANSI A112.18.1
M968847
Recommended Tools & Materials
Plumbers' Putty or
Adjustable Wrench Regular Screwdriver Channel Locks
Caulking
Turn off hot and cold water
CAUTION
INSTALL FAUCET
supplies

Resumen del contenido incluido en la página 2

MAKE WATER SUPPLY CONNECTIONS 2 Turn off hot and cold water supplies before beginning. Connect FLEXIBLE SUPPLIES (1, 2) directly to wall supplies. Connection on fitting supplies are 3/8" compression. Connect left supply to Hot and right supply to the Cold wall supply. Use adjustable wrench to tighten connections. Do not over tighten. Faucet supplies are 10" long from faucet base. Note: If additional supply length is required, installer must purchase additional parts separately. Important: If SU

Resumen del contenido incluido en la página 3

TEST INSTALLED FAUCET 1 4 AND CHECK FOR LEAKS With HANDLE (1) in OFF position, turn on WATER SUPPLIES (2) and check all connections for leaks. 3 Remove AERATOR (3). Operate HANDLE (1) to flush water lines thoroughly. Replace AERATOR (3). HOT COLD 2 1 HOT LIMIT SAFETY STOP ADJUSTMENT 5 2 By restricting handle rotation and limiting the amount of hot water allowed to mix with the cold, the HOT LIMIT SAFETY STOP reduces risk of accidental 3 scalding. To set the maximum hot water temperature of your