Manual de instrucciones de Atec BC-91009

Resumen del contenido incluido en la página 1

MODEL BC-91009
OPERATOR'S MANUAL
IMPORTANT SAFETY INSTRUCTIONS
1. SAVE THESE INSTRUCTIONS. This manual contains important safety and operating instructions for the battery charger you have
purchased. You may need to refer to these instructions at a later date.
2. CAUTION. To reduce risk of injury, charge only wet cell, lead-acid, automotive type rechargeable batteries. Other types of batteries
may burst causing personal injury and property damage.
3. Do not expose the charger to rain or snow

Resumen del contenido incluido en la página 2

15. CHARGER LOCATION a. Locate the charger as far away from the battery as the DC cables permit. b. Never place the charger directly above the battery being charged; gases from the battery will corrode and damage the charger. c. Never allow battery acid to drop on the charger when reading the specific gravity or filling battery, d. Do not operate the charger in a closed-in area, or restrict ventilation in any way. e. Do not set a battery on top of the charger. 16. DC CONNECTION PRECAUTIONS a. Co

Resumen del contenido incluido en la página 3

h. A marine (boat) battery must be removed and charged on shore. To charge it on board requires equipment specially designed for marine use. 20. GROUNDING AND AC POWER CORD CONNECTION INSTRUCTIONS The charger should be grounded to reduce the risk of electric shock. This charger is equipped with an electric cord having an equipment grounding conductor and a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ord

Resumen del contenido incluido en la página 4

charger will not charge with the timer in this position. b. 0 to 90 MINUTES TIMED CHARGE - The timer will automatically turn the charger off at the end of the pre-set charging time. Turn the timer past 20 before setting the desired time. c. CONTINUOUS CHARGE - The timer will not shut the charger OFF while in this position. Extended Charging can be done if the operator is knowledgeable in determining the proper rate and length of charge and monitors the charging process to prevent overcharging.

Resumen del contenido incluido en la página 5

MODEL BC-91009 REPAIR PARTS LIST 1. Timer ........................................ 610555 8. Fan Blade ..................................... 610692 2. Switch ........................................ 605675 9. Fan Motor ..................................... 610693 3. Axle w/nuts .................................... 610287 10. DC Circuit Breaker .............................. 610536 4. Wheels w/nuts ................................. 605672 11. Ammeter ...................................... 610751

Resumen del contenido incluido en la página 6

2 STOP-GO.WPG STOP GO LITE ON BATTERY-ENGLISH 3 EXT-BAT.WPG EXTERNAL BATTERY W/EXTENSION LEAD 4 PLUG-ENG.PLT GROUNDING ADAPTER -ENGLISH 5 ENGLSTBL.PLT CHARGE RATE TABLE - ENGLISH 6 8440.plt 8440 CABINET 7 A4415E.PLT BC-91009 WIRING DIAGRAM - ENGLISH 8 D5328MAN.PLT BC-91009 EXPLODED VIEW 6