Manual de instrucciones de Spirit XE 195

Manual de instrucciones del aparato Spirit XE 195

Aparato: Spirit XE 195
Categoría: Muebles
Fabricante: Spirit
Tamaño: 1.61 MB
Fecha de añadido: 6/23/2013
Número de páginas: 31
Imprimir el manual

Descargar

¿Cómo se utiliza?

Nuestro propósito es proporcionarte el acceso más rápido posible a los contenidos incluidos en los manuales de instrucciones del aparato Spirit XE 195. Utilizando la vista previa online, puedes ver rápidamente el índice de contenidos y pasar a la página donde encontrarás la solución a tu problema con Spirit XE 195.

Para tu comodidad

Si ver los manuales de instrucción de Spirit XE 195 directamente en esta página no es cómodo para ti, puedes utilizar dos soluciones posibles:

  • Vista en pantalla completa – Para ver cómodamente los manuales de instrucciones (sin descargarlos en tu ordenador) puedes utilizar el modo de vista en pantalla completa. Para activar la vista del manual Spirit XE 195 en pantalla completa, utiliza el botón Pantalla completa
  • Descargar al ordenador – también puedes descargar el manual de instrucciones de Spirit XE 195 a tu ordenador y guardarlo en tu colección. Sin embargo, si no quieres ocupar espacio en tu dispositivo, siempre podrás descargarlo de ManualsBase.
Spirit XE 195 Manual de instrucciones - Online PDF
Advertisement
« Page 1 of 31 »
Advertisement
Versión impresa

Muchas personas prefieren no leer el documento en la pantalla, sino en versión impresa. La opción de impresión también está prevista y puedes utilizarla haciendo clic en el enlace más arriba - Imprimir el manual. No tienes que imprimir el manual completo de Spirit XE 195, solo las páginas que elijas. Ahorra papel.

Resúmenes

A continuación encontrarás resúmenes de los contenidos incluidos en las páginas posteriores del manual de instrucciones para Spirit XE 195. Puedes utilizarlos si quieres ver rápidamente el contenido que se encuentra en la siguientes páginas del manual.

Resúmenes de contenidos
Resumen del contenido incluido en la página 1
















Z100 / Z300 Z500 Z700












XE 195 XE 295

Elliptical Elliptical



OWNER’S MANUAL








PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE
OPERATING YOUR NEW ELLIPTICAL!

Resumen del contenido incluido en la página 2

Table of Contents Product Registration…………………………………………………………………………. .2 Important Safety Instructions…………………………………………………………………3 Important Electrical Information………………………………………………………………4 Important Operation Instructions……………………………………………………………..4 Assembly Instructions………………………………………………………………………….5 Features……………………………………………………………………………………….. 17 Operation of Your New Elliptical……………………………………………………………..18 Maintenance……………………………………………………………………………………29 Manufacturer’s Limited Warranty……………

Resumen del contenido incluido en la página 3

CONGRATULATIONS ON YOUR NEW ELLIPTICAL AND WELCOME TO THE SPIRIT FAMILY! Thank you for your purchase of this quality elliptical trainer from Spirit Manufacturing, Inc. Your new elliptical was manufactured by one of the leading fitness manufacturers in the world and is backed by one of the most comprehensive warranties available. Through your dealer, Spirit will do all we can to make your ownership experience as pleasant as possible for many years to come. The local

Resumen del contenido incluido en la página 4

Important Safety Instructions WARNING - Read all instructions before using this appliance. ■ Do not operate elliptical on deeply padded, plush or shag carpet. Damage to both carpet and elliptical may result. ■ Keep children away from the elliptical. There are obvious pinch points and other caution areas that can cause harm. ■ Keep hands away from all moving parts. ■ Never operate the elliptical if it has a damaged cord or plug. If the elliptical is not working proper

Resumen del contenido incluido en la página 5

Important Electrical Information WARNING! ● NEVER remove any cover without first disconnecting AC power supply. ● If A.C. voltage varies by ten percent (10%) or more, the performance of your elliptical may be affected. Such conditions are not covered under your warranty. If you suspect the voltage is low, contact your local power company or a licensed electrician for proper testing. ● NEVER expose this elliptical to rain or moisture. This product is NOT designed for Use outdoors,

Resumen del contenido incluido en la página 6

Assembly Pack Check List XE195 Step 1 #96. 3/8" x 2T #84. 3/8" x 23 x 1.5T #66. M5 x 10mm Split Washer (1pc) Curved Washer (2pcs) Phillips Head Screw (4pcs) # 103. 3/8" x 3/4" #60. 3/8" x 2-1/4" Hex Head Bolt (2pcs) Hex Head Bolt (1pc) Step 2 #59. 5/16"x15m/m #79.5/16"x23mm #83. ψ 17mm Hex Head Bolt (2 pcs) Flat Washer (2pcs) Wave Washer (2 pcs) Step 3 #71. 5/16" x 7T #80. 5/16" x 20mm #104. 5/16” x 1-1/4” Nylon Nut (2 pcs) Flat Washer (2 pcs) Hex

Resumen del contenido incluido en la página 7

Step 4 #105.M5 x 15m/m #87. ψ 3.5x12m/m Phillips Head Screw (17pcs) Sheet Metal Screw (10pcs) Tools #108. Phillips Head Screw Driver (1 pc) #107. Short Phillips Head Screw Driver (1 pc) #109. 12m/m Wrench (1pc) #106. 13/14m/m Wrench (1pc) 6 XE195 / XE295 Elliptical

Resumen del contenido incluido en la página 8

Assembly Instructions XE195 STEP 1: CONSOLE MAST ASSEMBLY 1. Locate the Console Mast (12) and Console Mast Cover (41) and slide the Cover onto the mast as far as it will go. Make sure the Console Mast Cover is facing the correct way. 2. Unravel and straighten out the Computer Cable (31) and feed it into the bottom of the console mast tube and out of the top opening. 3. Install the Console Mast into the receiving bracket in the top of the Main Frame. NOTE: there is one bolt alrea

Resumen del contenido incluido en la página 9

5. With the 13/14mm Wrench tighten the three bolts, and the fourth bolt which is pre-installed, firmly. These bolts should be tightened as much as you possibly can. 6. There will be three electrical wire connectors at the top opening of the console mast, two 2 pin connectors for hand pulse sensors (36), one 10 pin connector for main wire harness (31) and one connector for the handle bar resistance switches (145). Connect these to the mating connectors on the back of the electronic Conso

Resumen del contenido incluido en la página 10

STEP 3: CONNECTING ARM ASSEMBLY 1. Align the hole in the rod end of the left Connecting arm (8) with the hole in the bracket of the left Handle Bar (10). The rod end should be on the inner side of the Handle Bar bracket. Make sure the ty-wrap is removed from the rod end and the sleeve spacer (22) does not fall out during assembly. Take one 5/16" x 1-1/4" Hex Head Bolt (104) and install it through the Handle Bar bracket and the rod end. Install one 5/16" x 20 x 1.5T Flat Washer (80) and one

Resumen del contenido incluido en la página 11

STEP 4: PLASTICS ASSEMBLY 1. Install the Connecting Arm Covers (2 each 57, 58) over the connection of the rod end and Handle Bars with four M5 x 15m/m Screws and two 3.5x10m/m Self Tapping Screws by using the Short Phillips Screw Driver. 2. Install the two Wheel Covers (52) using the four M5x15m/m Phillips Head Screws (105). 3. Locate the two Rear Stabilizer Covers (19,20) and two Middle Stabilizer Covers (19,20) for the Rear Rail Assembly and install with four M5 x 15m/m Screws (105). T

Resumen del contenido incluido en la página 12

Assembly Pack Check List XE295 Step 1 #66. M5 x 10mm #84. 3/8" x 23mm #96. 3/8" Split Phillips Head Screw (4pcs) Curved Washer (2pcs) Washer (1pc) #103. 3/8" x 3/4" #60. 3/8" x 2-1/4" Hex Head Bolt (2pcs) Hex Head Bolt (1pc) Step 2 #81. 25mm #103. 3/8"x3/4" #97.3/8" x 30mm Hex Head Bolt (2 pcs) Wave Washer (2pcs) Flat Washer(2pcs) Step 3 #80. 5/16" x 20 x 1.5T #104. 5/16” x 1-1/4” #71. 5/16" Flat Washer (2

Resumen del contenido incluido en la página 13

Step 4 #105.M5 x 15mm #87. 3.5x12mm Phillips Head Screw (19pcs) Sheet Metal Screw (18pcs) Tools #108. Phillips Head Screw Driver (1 pc) #107. Short Phillips Head Screw Driver (1 pc) #109. 12m/m Wrench (1pc) #106. 13/14m/m Wrench (1pc) 12 XE195 / XE295 Elliptical

Resumen del contenido incluido en la página 14

Assembly Instructions XE295 STEP 1: CONSOLE MAST ASSEMBLY • Locate the Console Mast (12) and Console Mast Cover (41) and slide the Cover onto the mast as far as it will go. Make sure the Console Mast Cover is facing the correct way. • Unravel and straighten out the Computer Cable (31) and feed it into the bottom of the console mast tube and out of the top opening. • Install the Console Mast into the receiving bracket in the top of the Main Frame. NOTE: there is one bolt already in

Resumen del contenido incluido en la página 15

• Using the 13/14mm Wrench, tighten the three bolts, and the fourth bolt which is pre-installed, firmly. These bolts should be tightened as much as you possibly can. • There will be three electrical wire connectors at the top opening of the console mast, two 2 pin connectors for hand pulse sensors (36), one 10 pin connector for main wire harness (31) and one connector for resistance switch (124). Connect these to the mating connectors on the back of the electronic Console (30). The connecto

Resumen del contenido incluido en la página 16

STEP 3: CONNECTING ARM ASSEMBLY  Align the hole in the rod end of the left Connecting arm (8) with the hole in the bracket of the left Handle Bar (10). The rod end should be on the inner side of the Handle Bar bracket. Make sure the ty-wrap is removed from the rod end and the sleeve spacer (22) does not fall out during assembly. Take one 5/16" x 1-1/4" Hex Head Bolt (104) and install it through the Handle Bar bracket and the rod end. Install one 5/16" x 20 x 1.5T Flat Washer (80) and one

Resumen del contenido incluido en la página 17

STEP 4: PLASTICS ASSEMBLY • Install the Connecting Arm Covers (2 each 57 & 57-1 and 58 & 58-1) over the connection of the rod end and Handle Bars with the M5 x 15mm Screws (87) and 3.5x10m/m Self Tapping Screws (105) by using the Short Phillips Screw Driver. • Install the two Wheel Covers (52) using the four M5x15m/m Phillips Head Screws (105). • Locate the two Rear Stabilizer Covers (19,20) and two Middle Stabilizer Covers (19,20) for the Rear Rail Assembly and install with four M5 x 15

Resumen del contenido incluido en la página 18

Features Adjustable foot pedals, and orthopedically correct footpads Through research performed with a leading sports scientist and physical rehabilitation expert, Spirit engineering has developed a breakthrough in pedal design. No other elliptical, at any price, offers these unique features. The history of elliptical use over the past few years tells us that many users suffer from numb toes while working out on elliptical trainers. Many other users complain of ankle, Achilles tendo

Resumen del contenido incluido en la página 19

Operation of Your Elliptical Getting familiar with the control panel ■ XE195 & XE295 Console Power up The Elliptical is supplied with an external power supply. When power is connected to the Elliptical, the console will automatically power up. If there is no input to the console for a period of time the console will go to stand-by mode. In stand-by mode the console display will turn off. To turn the console on press any key. When initially powered on the console will perform

Resumen del contenido incluido en la página 20

Console Operation Safety lock When the elliptical is powered on the resistance at the pedals will be set to the very highest setting. This is a safety feature that makes sure that you have a stable platform to stand on and the footpads won’t move suddenly while setting the console data. It also ensures that children cannot operate the elliptical unsupervised and injure themselves by pedaling too fast. You can turn this feature off and have the elliptical set to the lightest resistance


Manuales de instrucciones similares
# Manual de instrucciones Categoría Descargar
1 Spirit XBR95 Manual de instrucciones Muebles 8
2 Spirit XG200 Manual de instrucciones Muebles 0
3 Spirit XE 295 Manual de instrucciones Muebles 0
4 Sony Manual de instrucciones Muebles 1
5 Sony XL-2000K Manual de instrucciones Muebles 1
6 Sony SU-32FS2 Manual de instrucciones Muebles 3
7 Sony PSS-610 Manual de instrucciones Muebles 10
8 Sony HVL-LBP Manual de instrucciones Muebles 8
9 Sony SU-GW1 Manual de instrucciones Muebles 2
10 Sony SU-27FS2 Manual de instrucciones Muebles 0
11 Sony SU-36FS2 Manual de instrucciones Muebles 0
12 Sony 210 Manual de instrucciones Muebles 0
13 Sony SU-27HX1 Manual de instrucciones Muebles 0
14 Sony SU-36XBR8 Manual de instrucciones Muebles 1
15 AB Soft Litebook Elite 2.02 Manual de instrucciones Muebles 6