Manual de instrucciones de Sanus Systems Sanus VisionMount VMCT

Resumen del contenido incluido en la página 1

Assembly Instructions for Model: VMCT
Thank you for choosing a Sanus Systems VMCT. This product is designed to work with other products to easily and safetly
contain and hide component cables, power cords, and wires.
If you do not understand these directions, or have any doubts about the safety of the installation, please call a qualified
contractor or contact Sanus at 800.359.5520 or www.sanus.com. Our customer service representatives can quickly assist
you with installation questions and m

Resumen del contenido incluido en la página 2

Step 1: Attach Wall Plate NOTE: Do not overtighten the Wood Screws (C). Tighten the Wood Screws only until the Wall Plate (A) is pulled firmly against the wall. If there is a layer of drywall or other material, this drywall or other material may not exceed 5/8 inch [15.8 mm] in thickness. Orient the Wall Plate (A) so that its flat side is against the wall as shown in Diagrams 1A and 1B and use the Wall plate as a template to mark the two holes for the Wood Screws (C) on the chosen stud. Dri