Manual de instrucciones de Lightolier Lighting Systems IS_ALETTA-ROW

Resumen del contenido incluido en la página 1

Lighting Systems IS_ALETTA-ROW













We reserve the right to change details of design, materials and finish.

Resumen del contenido incluido en la página 2

Lighting Systems IS_ALETTA-ROW 1. GRID MAIN RUNNERS GRID MAIN RUNNERS ST STARTER ARTER Figure 1 Figure 2 2. 3. ST STARTER ARTER JOINER JOINER Figure 3 We reserve the right to change details of design, materials and finish.

Resumen del contenido incluido en la página 3

Lighting Systems IS_ALETTA-ROW ENDER ENDER Figure 4 Figure 5 6. ACCESS PLA ACCESS PLATE TE GRID CLIP GRID CLIP GRID CLIP Figure 6 Figure 7 We reserve the right to change details of design, materials and finish.

Resumen del contenido incluido en la página 4

Lighting Systems IS_ALETTA-ROW 7. Figure 8 Figure 9 NOTE: Depending on lamp configuration, installer may need to swing down a SIDE DIFFUSER to simplify lamp installation. (Fig. 11) SIDE DIFFUSER SUPPORT PIN Figure 10 Swing up one side diffuser and Swing up the second side diffuser secure with provided hardware. and secure with provided hardware. Snap in the center diffuser. Figure 11 We reserve the right to change details of design, materials and finish.

Resumen del contenido incluido en la página 5

Lighting Systems IS_ALETTA-ROW NOTE: Diffusers from STARTER/ENDER and JOINER fixtures are not interchangeable. SUPPORT PIN DIFFUSER SPRING DIFFUSER SPRING Raise diffuser until all four DIFFUSER SPRINGS make contact with all four SUPPORT PINS. Shift diffuser to one side to hook spring over pin. Figure 12 Figure 13 SUPPORT PIN DIFFUSER SPRING Push up on springs to make sure they are fully Push up on diffuser until all four DIFFUSER SPRINGS engage over all SUPPORT PINS. snap o