Manual de instrucciones de Lightolier FW7500

Resumen del contenido incluido en la página 1

Lighting Systems IS-FW7000












FW7100 FW7400
FW7200 FW7500
FW7300 FW7600
FW7700

We reserve the right to change details of design, materials and finish.

Resumen del contenido incluido en la página 2

Lighting Systems IS-FW7000 Additional mounting holes Single gang outlet box depending on wall construction Rotated 90º, required at feed point. 3.75 for No. 10 hardware (by others). 0.75 Main mounting holes to be located 1-3/4” above bottom of fixture 3.25 for No. 8 hardware (by others). See page 3 See page 3 1’-4” for mounting centers for mounting centers Figure 1 Set Screw 1/4 Turn Fastener Set Screw Electrical Plug Figure 2 Figure 3 We reserve the right t

Resumen del contenido incluido en la página 3

Lighting Systems IS-FW7000 SAMPLE RUNS 2’-8” 6’-8” 4’-3” 8’-3” 6’-8” 1’-4” 2’-8” 12’-3” 6’-8” 1’-4” 6’-8” 16’-3” 6’-8” 1’-4” 6’-8” 1’-4” 2’-8” 20’-3” 2’-8” 2’-8” 1’-4” 2’-8” 4’-3” 8’-3” 2’-8” 1’-4” 2’-8” 1’-4” 2’-8” 12’-3” 2’-8” 1’-4” 2’-8” 1’-4” 2’-8” 1’-4” 2’-8” 16’-3” 2’-8” 1’-4” 2’-8” 1’-4” 2’-8” 1’-4” 2’-8” 1’-4” 2’-8” 20’-3” We reserve the right to change details of design, materials and finish.

Resumen del contenido incluido en la página 4

Lighting Systems IS-FW7000 Canopy Canopy Secured Ballast Tray Under Ballast Tray Hardware (By Others) 1-3/4” Figure 4 Figure 5 Figure 6 Step 1. Installing the First Fixture Step 2. Installing the Remaining Fixtures Step 3. End Caps A. B. We reserve the right to change details of design, materials and finish.

Resumen del contenido incluido en la página 5

Lighting Systems IS-FW7000 INSTALL LENSES FOR FW7700 Step 1. Make sure the lens is fully engaged with the housing as shown below. Lens Assembly Screw Groove Figure 7 Housing Extrusion Step 2. Install (2) lens clips per lens. One right hand and one left hand utilizing the short screws provided. Lens Clip Short Screw Figure 8 Longer Screw Step 3. Install 2 longer screws per lens along the housing screw groove approximately 6” from end of lens. We reserve the