Manual de instrucciones de Hans Grohe Metris 31261XX1

Resumen del contenido incluido en la página 1

Installation Instructions / Warranty
Metris
31060XX1
31020XX1
31261XX1

Resumen del contenido incluido en la página 2

Metris Single Control Lavatory Mixer 31060XX1 Tall Lavatory Mixer 31020XX1 Single Control Bidet Mixer 31261XX1 31060XX1 31020XX1 31261XX1 Technical Specification Recommended incoming water pressure 22 - 72 PSI o o Recommended incoming hot water temperature 120 - 140 F* Hole size in mounting surface 1 3/8” Maximum mounting surface thickness 1 5/8” Flow rate 2.2 gpm max. Supply hoses require stops with 3/8” compression fittings (not included) Bidet mixer 31261XX1 is not intended for u

Resumen del contenido incluido en la página 3

Installation Place the faucet and the sealing ring on the countertop. From below, install the fiber washer, friction washer and mounting nut. Tighten the mounting nut and the tension- ing screws. sealing ring fiber washer friction washer mounting nut tensioning screws Attach the hoses to the supply stops with 3/8” compres- sion fittings (not included). Use two wrenches, as shown, to prevent the hoses from twisting or from becoming loose. Install the pop-up drain (see page 4). Turn on the wa

Resumen del contenido incluido en la página 4

Install the Pop-up Drain plunger Remove the plunger assembly. height adjuster Unscrew the drain outlet flange from the tee. flange Unscrew the tailpiece from the tee. Wrap the threads with plumbers’ thread tape and replace. Install the white, flexible sealing gasket to sealing gasket the flange. Place it in the sink outlet. From under the sink, install the black mack mack gasket pull rod gasket, white friction ring and retainer nut to the flange. Do not tighten the nut against fricti

Resumen del contenido incluido en la página 5

Reset the High Temperature Limit Stop (optional) Close the drain OR cover it with a wash cloth. Use the included 4 mm Allen wrench to push the screw cover into the handle. Retrieve the screw cover when the handle is removed. Use the 4mm Allen wrench to loosen the handle screw 4 complete revolutions. Remove the handle and put it in a safe place. Remove the decorative nut cover and put it in a safe place. Remove the handle screw from the stem of the cartridge. Remove the high temperatur

Resumen del contenido incluido en la página 6

Replacement Parts 1 1.1 2 1 3 1.1 2 4 3 10 5 4 11 9 10 9 12 5 11 12 6 6 13 15 14 7 8 7 1 handle 31093XXX 1.1 screw cover 96338000 2 flange 97406XXX 3 nut 97209000 4 cartridge 92730000 5 seal 95008000 6 aerator 13912XXX 7 fixing set 13961000 8 connection hose 96321001 9 pull rod 96657XXX 10 handle screw 96059000 11 o-ring, 30 x 2 98186000 12 o-ring 35 x 2 92604000 13 ball joint 97362XXX 14 aerator 97360XXX 15 connection hose 96316001 XXX = color 000 = chrome 820 = brushed nickel 6

Resumen del contenido incluido en la página 7

Cleaning Recommendation for Hansgrohe Products Modern lavatory faucets, kitchen faucets, and showers consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and returns, it is necessary to consider certain criteria when cleaning. Cleaning Materials for Faucets and Showers Acids are a necessary ingredient of cleaning materials for removing lime, however please pay attention to the following points when cleaning faucet

Resumen del contenido incluido en la página 8

including, without limitation, a commercial purpose, this warranty extends only (i) for 1 year, with respect to Hansgrohe and Commercial products, and (ii) for 5 years, with respect to AXOR products. THIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR: A. Conditions, malfunctions or damage not resulting from defects in material or workmanship. B. Conditions, malfunctions or damage resulting from (1) normal wear and tear, improper installation, improper maintenance, misuse, abuse, ne