Manual de instrucciones de Havis-Shields KWIK-STRIKE 4000 Series

Resumen del contenido incluido en la página 1

INSTALLATION INSTRUCTIONS
KWIK-STRIKE 4000TM SERIES SCENE LIGHT


Warning: Please read all instructions and warnings prior to installation. Power must be disconnected
prior to installation or servicing. This luminaire must be installed and operated per NFPA 70 National
Electric Code, and all applicable codes and regulations. These instructions are provided as a guideline
for proper installation.


HARDWARE & COMPONENTS:

Qty. Description Part #
4 #10 X ¾” Phillips Flat

Resumen del contenido incluido en la página 2

For 120 volt AC Fixtures: • All 120 volt AC fixtures have three (3) wires. The green wire is always ground. Attach the black wire to 120 volt HOT and the white to 120 volt NEUTRAL. Black – Hot White – Neutral Green – Ground For 12 VDC Fixtures: • All versions have a red and black wire or a white and black wire. Attach the red/white wire to positive 12 VDC and the black wire to negative. Red–+12VDC Black – (-) 3. Main

Resumen del contenido incluido en la página 3

KR-4000_INST_4-08.doc KWIK-STRIKE 4000TM SERIES MOUNTING TEMPLATE NOTE: IF PRINTING THIS TEMPLATE FROM A PDF: (1) ENSURE THE TEMPLATE IS PRINTED WITH NO SCALING (100% SIZE) (2) MEASURE THE TEMPLATE TO ENSURE IT IS PRINTED CORRECTLY BEFORE USING IT IN ALL CASES, IT IS RECOMMENDED TO USE THE FIXTURE HOUSING FOR DRILLING CUT OUT THIS SEC