Manual de instrucciones de Draper LCD Lift Video Projector

Resumen del contenido incluido en la página 1

220 Volt Installation/Operating Instructions
LCD Lift Video Projector Lift
➄ Use the switch to move the traveling pan up and down. Removal of the
These Installation/Operating Instructions are available in the offi cial language
access panel will allow the observation of this movement. The unit will stop
of the country where you purchase the product. Please contact your distributor
automatically when it reaches the fully up or fully down po si tion.
to request a copy.
➅ Cycle the unit in bot

Resumen del contenido incluido en la página 2

Page 2 of 4 220V LCD Lift by Draper ➄ Access should be provided to electrical control box in case service is required. ➅ Do not use unit to support adjacent ceiling, light fi xtures, etc. Threaded rod for Ball chain for ➆ Do not complete the ceiling below unit until electrical connections have unit suspension bomb bay doors been completed and unit has been operated successfully. ➇ We recommend safety cables be attached to LCD Lift for added security. Electrical Connections Threaded rod to Unit

Resumen del contenido incluido en la página 3

Page 3 of 4 220V LCD Lift by Draper Dimensions of Traveling Pan A Installing Projector B 67 mm 67 mm The video projector should be suspended from the travel ing pan ac cord ing to projector manufacturer’s instructions or using optional SMS Low Profi le C Mount, and using rec om mend ed standard ceiling mounting hardware (“Z” brackets are attached to bottom side of traveling pan for easier installation). Z brackets and If SMS Low Profi le is used, remove aluminum adaptor bracket from LCD Lift.

Resumen del contenido incluido en la página 4

Eye Port for IR Eye, RF Receiver or LED Switch. If more than one of these three is used with one LVC-III, a splitter is required. 3 Button Wall Switch DOWN - Black COM - White TB1 UP - Red 5 Aux Port for connecting additional LVC-III modules (up to six total- 6 connect from Aux to Eye) 7 Splice Red Motor Yellow/ Brown Green Yellow Black White 1 2 3 4 5 6 7 8 9 10 Neut 220V AC Supply Hot 1 2 3 4 5 6 7 8 9 10 Wiring for Remote Mounting of LVC. TB1 1 L1 Black 220 V AC