Resumen del contenido incluido en la página 1
Hand Held Linear Imager
Resumen del contenido incluido en la página 2
Disclaimer Welch Allyn Data Collection, Inc. reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult Welch Allyn Data Collection, Inc. to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of Welch Allyn Data Collection, Inc. Welch Allyn Data Collection, Inc. shall not be liable for technical or editorial
Resumen del contenido incluido en la página 3
Section 1 Getting Started Section Page About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–1 Connecting the Scanner When Powered by Host (Keyboard Wedge) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2 Plug and Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–3 USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–8 Serial Wedge . . . . . . . . . . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 4
Section 3 Output Section Page Scan Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–1 Beeper Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–1 Beeper Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–2 Scan Voting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–2 Reduce Quiet Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–2 Reread Delay . . . . . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 5
Section 6 Secondary Interface Section Page Secondary Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–1 Secondary Code 39 Wand Emulation . . . . . . . . . . . . . 6–1 Secondary RS-232 Connection . . . . . . . . . . . . . . . . . . 6–1 Secondary Non Decoded Output Laser Emulation . . 6–2 Non Decoded Output Laser Emulation Transmission Rate . . . . . . . . . . . . . . . . . . . . . . . . . . 6–2 Non Decoded Output Laser Emulation Polarity . . . . . 6–2 Non Decoded Laser Em
Resumen del contenido incluido en la página 6
Section 8 Cloning Cloning Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–1 Section 9 Visual Menu Section Page Visual Menu Operations . . . . . . . . . . . . . . . . . . . . . . . . 9–1 Temporary Visual Menu Configuration . . . . . . . . . . . . 9–1 Installing Visual Menu from the Web . . . . . . . . . . . . . . 9–2 Section 10 Interface Keys Section Page Keyboard Function Relationships . . . . . . . . . . . . . . . . 10–1 Supported Interface Keys . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 7
TM The IMAGETEAM 3800 is a high performance linear imaging scanner from Welch Allyn Data Collection, Inc. The IT3800 marks a new performance level for hand held scanners. Linear imaging technology is defined by a bright and sharply focused aiming line, high resolution imaging, and fast reading speed. The IT3800 is comfortable to hold, easy to use, rugged, and excellent for all general scanning applications. This User’s Guide provides installation and
Resumen del contenido incluido en la página 8
A scanner can be connected between the keyboard and PC as a “keyboard wedge,” plugged into the serial port, or connected to a portable data terminal in wand emulation or non decoded output mode. The following is an example of a keyboard wedge connection: 1. Turn off power to the terminal/computer. 2. Disconnect the keyboard cable from the back of the terminal/computer, as shown below. 3. Connect the appropriate interface ca
Resumen del contenido incluido en la página 9
Plug and Play bar codes provide instant scanner set up for commonly used interfaces. After you scan one of the codes, power cycle the host terminal to have the interface in effect The most common interface is Keyboard Wedge. The following Keyboard Wedge bar code also programs a carriage return (CR) and line feed (LF) suffix. Keyboard Wedge Interface for IBM PC AT and Compatibles (Default) The following Plug and Play bar code for IBM XT and Compatibles also programs a carriag
Resumen del contenido incluido en la página 10
The RS-232 Interface bar code is used when connecting to the serial port of a PC or terminal. The following RS-232 Interface bar code also programs the parameters: Option Setting Baud Rate 9600 bps Parity Even Data Format 7 data bits, parity bit, 1 stop bit (8 bit data) RS-232 Interface In Wand Emulation mode, the scanner decodes the bar code then sends data in the same format as a wand scanner. The Same Code format transmits UPC, EAN, Code 128 and Interleaved 2 of 5 bar codes without any chan
Resumen del contenido incluido en la página 11
! "#$% &!' (!' )
The following Retail “Plug and Play” codes are for use with the 3800LR–11 model only. Scan one of the following “Plug and Play” codes to program the IT3800 for IBM 4683 Port 5B, 9B, or 17. After you scan one of the codes, power cycle the cash register to have the interface in effect IBM 4683 Port 5B Interface IBM 4683 Port 9B HHBCR-1 Interface IBM 4683 Port 9B HHBCR-2 Interface IBM 4683 Port 17 Interface Each bar code above also programs the fol
Resumen del contenido incluido en la página 12
*
Scan one of the following “Plug and Play” codes to program the IT3800 for Generic OCIA, NCR OCIA Short Format (8 bit), NCR OCIA Long Format (9 bit), and Nixdorf OCIA. After you scan one of the codes, power cycle the cash register to have the interface in effect Generic OCIA Interface The Generic OCIA bar code also programs the following prefixes for each symbology: Symbology Prefix Symbology Prefix EAN 8 06 06 UPC A 01 EAN 13 06 UPC E 05 +,
Resumen del contenido incluido en la página 13
+, * / -. ( !
NCR OCIA Long Format (9 Bit) Interface The NCR OCIA Long Format (9 Bit) bar code also programs the following prefixes for each symbology: Symbology Prefix Symbology Prefix EAN 8 46 46 Code 39 42 31 EAN 13 46 I 2 of 5 42 32 UPC A 41 Code 128 42 33 UPC E 45 +0 *
Nixdorf OCIA Interface The Nixdorf OCIA bar code also programs the following prefixes for each symbology: Symbology Prefix EAN/UPC with Addenda 44
Resumen del contenido incluido en la página 14
1 ! The IT3800 uses a USB converter to simulate a USB keyboard. Data flows into applications as if entered from the keyboard. The USB converter is compatible with Apple I–MAC Series and Windows 98 and later PCs. Use cable set 42206062–01 to make the USB port connection. To set up the USB communications, find the terminal ID in the Supported Terminal Chart and follow the instructions on page 2–2. The PC and scanner automatically connect. Communications start immediately. The IT3
Resumen del contenido incluido en la página 15
2 .
IMAGETEAM 3800 scanners are factory programmed for a keyboard wedge interface to an IBM PC AT with a USA keyboard. If this is your interface and you do not need to modify the settings, skip to Section 3 – Output. If you have a different terminal and/or you want to make any keyboard wedge changes, scan the bar code below. IBM PC AT and Compatibles with CR, LF suffix IMAGETEAM 3800 User’s Guide 2–1
Resumen del contenido incluido en la página 16
. 3 If your interface is not a standard PC AT, refer to the Supported Terminals Chart on page 2–3 and locate the Terminal ID number for your PC. Scan the Terminal ID bar code below, then scan the numeric bar code(s) on the inside back cover of this manual to program the scanner for your terminal ID. Scan Save to save your selection. For example, an IBM PS/2 terminal has a Terminal ID of 002. You would scan the Terminal ID bar code, then 0, 0, 2 from the inside back cover, then Save. I
Resumen del contenido incluido en la página 17
44 . Terminal Model(s) Terminal ID Apple Mac Mac Classic, SE SE30, II (All) 049** Apple Mac Powerbook 5300 Series (Portable PC) 049** DEC VT510, 520, 525 (PC style) 005 DEC VT510, 520, 525 (DEC style LK411) 104 Esprit 200, 400 005 Heath Zenith PC, AT 090 HP Vectra 003 HP Vectra AT 023 IBM XT 001 IBM PS/2 25, 30, 77DX2 002 IBM AT, PS/2 30–286, 50, 55SX, 60, 70, 70–061, 70–121, 80 003* IBM 102 key 3161,3162, 3163, 3191, 3192, 006 3194, 3196, 3197, 3471, 3472, 3476, 3477 IBM 12
Resumen del contenido incluido en la página 18
44 . '
Terminal Model(s) Terminal ID Telex 88 key 078, 078A, 79, 80, 191, 196, 025 1191,1192, 1471, 1472, 1476, 1477, 1483 Telex 88 key Data Entry Keyboard 112 Telex 102 key 078, 078A, 79, 80, 191, 196, 045 1191,1192, 1471, 1472, 1476, 1477, 1483 Telex 122 key 078, 078A, 79, 80, 191, 196, 046 1191,1192, 1471, 1472, 1476, 1477, 1482, 1483 TTL Serial Wedge 050 USB 124 Wand Emulation 061 Scan the Program Keyboard Country bar code below, then scan t
Resumen del contenido incluido en la página 19
This programs keyboard styles, such as Caps Lock and Shift Lock. Default = Regular. Regular is used when you normally have the Caps Lock key off. * Regular Caps Lock is used when you normally have the Caps Lock key on. Caps Lock Shift Lock is used when you normally have the Shift Lock key on. (Not common to U.S. keyboards.) Shift Lock Automatic Caps Lock is used if you change the Caps Lock key on and off. The software tracks and reflects if you have Caps Lock on or off (AT and P
Resumen del contenido incluido en la página 20
This modifies special keyboard features, such as CTRL+ ASCII codes and Turbo Mode. Control + ASCII Mode On – The scanner sends key combinations for ASCII control characters for values 00–1F. Refer to page 10–1 for CTRL+ ASCII Values. Default = Off Control + ASCII Mode On * Control + ASCII Mode Off Turbo Mode – The scanner sends characters to an IBM AT terminal faster. (For use with IBM AT only.) If the terminal drops characters, do not use Turbo Mode. Default = Off Tur
