Manual de instrucciones de Chief Manufacturing PAC-251

Resumen del contenido incluido en la página 1

INSTALLATION INSTRUCTIONS
CPU/DVD and VCR Mounting Accessory
Model: PAC-251
The PAC-251 allows the integration of a CPU, DVD Player or
VCR into installations using most Chief Large Flat Panel Display
mounts. This accessory easily adapts to Chief's patented
Q-Latch™ Mounting system and also allows for easy access to
drives and input/output connections.
Fits Equipment Dimensions:
5.125"–17.625" W x 1.5"–3.5" H x 3.5"–15.5" D
BEFORE YOU BEGIN
WARNING: FAILURE TO READ, THOROUGHLY UND

Resumen del contenido incluido en la página 2

Model: PAC-251 Installation Instructions IMPORTANT WARNINGS AND CAUTIONS! WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions. CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the corresponding instructions. WARNING: FAILURE TO PROVIDE ADEQUATE STRUCTURAL STRENGTH FOR THIS ACCESSORY CAN RESULT IN SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! It is the installer’s respo

Resumen del contenido incluido en la página 3

Installation Instructions Model: PAC-251 TOOLS REQUIRED FOR INSTALLATION Item Description Qty • 1/8" Hex Wrench (provided) 10 RACK, device Mounting 1 20 BRACKET, device Holding 4 PARTS 30 BRACKET, device Mounting 4 Unpack carton, inspect and verify contents. Read installation 40 BUTTON, Mounting 4 instructions completely. If any listed parts are missing, 50 SCREW, Flat Head Cap, 10-24 x 1/2" (Black) 4 immediately contact a Chief Customer Service representative by calling 1-800-582-6480, or by

Resumen del contenido incluido en la página 4

Model: PAC-251 Installation Instructions INSTALLATION Install Mounting Buttons and Latching Flag 1 50 (4 places) WARNING: IMPROPER INSTALLATION CAN LEAD TO DEVICE RACK FALLING! Mounting buttons must be securely fastened to device rack. 90 100 70 1. Install four mounting buttons (40) to device rack (10) using four 10-24 x 1/2" flat head cap screws(50). 40 (4 places) 2. Secure latching flag (90) to CPU holder (10) using one #10-24 x 1/2" Phillips Machine screw (100), one flat washer (110),

Resumen del contenido incluido en la página 5

Installation Instructions Model: PAC-251 Adjust Lower device Mounting Brackets 3 1. Position two device holding brackets (20) so that device they are at their outermost position. (see detail in figure at left) 2. Slide device into rack until resting on two lower device mounting brackets (30). 3. Slide two device holding brackets (20) forward until they contact device. 30 4. Tighten two 1/4-20 Nylock nuts (70) 20 10 70 Install Upper Device Mounting Brackets 4 60 (2 places) WARNING: IMPROPER

Resumen del contenido incluido en la página 6

Model: PAC-251 Installation Instructions Adjust Upper Device Mounting Brackets 5 1. Slide two device holding brackes (20) forward until they contact device. (see detail in figure at left) 2. Tighten two 1/4-20 Nylock nuts (70) 70 20 device 10 Install Device Accessory with Device to 6 Mount WARNING: COMBINED WEIGHT OF device AND RACK MAY WEIGHT IN EXCESS OF 40 LBS. ALWAYS use two people when lifting and follow proper lifting technicques when installing! 1. Secure device rack with device to