Manual de instrucciones de Chief Manufacturing MSR Series

Resumen del contenido incluido en la página 1

INSTALLATION INSTRUCTIONS
MEDIUM FLAT PANEL DISPLAY STATIC MOUNT
MSR Series
The MSR Series static mount accommodates medium
flat panel displays weighing up to 125 lbs (57 kgs).
The teardrop holes in the mount allow for quick
connect/disconnect of the display, thus simplifying
installation and maintenance processes.
The top and bottom mounting brackets are adaptable to
single wood stud mounting or dual wood studs that are
16” on center.
After installing the display on the mount, the screen can

Resumen del contenido incluido en la página 2

Installation Instructions MSR Series IMPORTANT WARNINGS and CAUTIONS! WARNING A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions. CAUTION A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the corresponding instructions. WARNING Improper installation can result in serious personal injury! Make sure that the structural members can support a redundant weight factor five times the total weight of t

Resumen del contenido incluido en la página 3

Installation Instructions MSR Series PARTS LIST CONTENTS Prior to assembly, unpack the carton completely. Verify DIMENSIONAL DRAWING ..................................... 2 contents listed in Table 1 and Figure 1. TOOLS REQUIRED FOR INSTALLATION.............. 3 Read installation instructions completely. If you are PARTS LIST .............................................................. 3 missing any of the listed parts, contact Customer Service MSR INSTALLATION .................................

Resumen del contenido incluido en la página 4

Installation Instructions MSR Series MSR INSTALLATION Select And Prepare Mounting Location WARNING: Improper installation can result in serious personal injury or damage to equipment! Make sure that the structural members can support a redundant weight factor five times the total weight of Pilot Holes the equipment. If not, reinforce the structure before Wall installing the mount. It is the responsibility of the installer to verify that the framework will safely support the combined load of t

Resumen del contenido incluido en la página 5

Installation Instructions MSR Series 6” max. “ Side to Side” 2” max. “Side to Side” MSR INSTALLATION (Cont’d) Adjustment Adjustment Mount the MSR To mount the MSR: 1. Place MSR against wall and align MSR upper mounting holes with upper pilot hole(s) in wall. (see Figure 5). 2. Install 5/16” x 2-½” lag bolts (20), and 5/16” washers (30) through MSR upper mounting holes and into upper pilot holes. DO NOT fully tighten upper lag bolts at this time. 3. Verify lower MSR mounting hole(s) align with lo

Resumen del contenido incluido en la página 6

Installation Instructions MSR Series ATTACH MSB TO THE DISPLAY To attach the MSB to the display, do the following: Display To help your identify the correct MSB that matches the model number of your display, refer to the cross- reference chart at www.chiefmfg.com. To download the corresponding MSB installation instructions, refer to www.chiefmfg.com. OR Contact Customer Service at 952-582-6480 if you have any questions about how to select the MSB that matches the model number of your display.

Resumen del contenido incluido en la página 7

Installation Instructions MSR Series Latching Flag Extension Installation 1. Insert extender slot into top of latching flag. 2. Install screw through latching flag and extender into nut. Extender Locknut Machine Screw Latching Flag Figure 8. Raise Latching Flag to Lock 7