Resumen del contenido incluido en la página 1
CPX8000 Series CPX8216/CPX8216T
®
CompactPCI System
Reference Manual
CPX8216A/RM4
August 2002 Edition
Resumen del contenido incluido en la página 2
© Copyright 2002 Motorola Inc. All rights reserved. Printed in the United States of America. Motorola® and the Motorola symbol are registered trademarks of Motorola, Inc. PowerPC® and the PowerPC logo are registered trademarks of International Business Machines Corporation (IBM) and are used by Motorola, Inc. under license from IBM. CompactPCI® is a registered trademark of the PCI Industrial Computer Manufacturer’s Group (PICMG). All other product or service names mentioned in this document ar
Resumen del contenido incluido en la página 3
Safety Summary The following general safety precautions must be observed during all phases of operation, service, and repair of this equipment. Failure to comply with these precautions or with specific warnings elsewhere in this manual could result in personal injury or damage to the equipment. The safety precautions listed below represent warnings of certain dangers of which Motorola is aware. You, as the user of the product, should follow these warnings and all other safety precautions necessa
Resumen del contenido incluido en la página 4
Flammability All Motorola PWBs (printed wiring boards) are manufactured with a flammability rating of 94V-0 by UL-recognized manufacturers. CE Notice (European Community) Warnin g This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take ! adequate measures. Warning Motorola Computer Group products with the CE marking comply with the EMC Directive (89/336/EEC). Compliance with this directive implies conform
Resumen del contenido incluido en la página 5
FCC Class A This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Resumen del contenido incluido en la página 6
country. Such references or information must not be construed to mean that Motorola intends to announce such Motorola products, programming, or services in your country. Limited and Restricted Rights Legend If the documentation contained herein is supplied, directly or indirectly, to the U.S. Government, the following notice shall apply unless otherwise agreed to in writing by Motorola, Inc. Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparag
Resumen del contenido incluido en la página 7
Contents About this Manual Summary of Changes ................................................................................................xix Systems Supported ....................................................................................................xxi Overview ..................................................................................................................xxii Comments and Suggestions ...............................................................................
Resumen del contenido incluido en la página 8
Hot Swap Control Status Register (CSR) ........................................................ 1-16 The Hot Swap Process ............................................................................................ 1-16 Physical Connection Process ........................................................................... 1-17 Hardware Connection Process ......................................................................... 1-17 Software Connection Process ....................................
Resumen del contenido incluido en la página 9
CHAPTER 4 PMC Modules Overview .................................................................................................................. 4-1 SCSI-2 Controller PMC ........................................................................................... 4-1 Switch Settings .................................................................................................. 4-3 Connector Pin Assignments .............................................................................. 4-4 CHAP
Resumen del contenido incluido en la página 10
Indicator LED/Miscellaneous Header (J2) ............................................... 5-43 CHAPTER 6 Subassembly Reference Chapter Overview ..................................................................................................... 6-1 Parts of the System ................................................................................................... 6-2 CompactPCI Card Cage Reference .......................................................................... 6-4 Backplane Referenc
Resumen del contenido incluido en la página 11
APPENDIX A Specifications Environmental Characteristics .................................................................................A-1 Power Supply Electrical Specifications ...................................................................A-2 APPENDIX B Related Documentation Motorola Computer Group Documents ...................................................................B-1 Related Specifications ........................................................................................
Resumen del contenido incluido en la página 12
List of Figures Figure 1-1. CPX8216 Domains ............................................................................... 1-2 Figure 1-2. CPX8216 Standard System Layout ...................................................... 1-3 Figure 1-3. CPX8216T H.110 System Layout ........................................................ 1-4 Figure 1-4. CPX8216 I/O Bus Connectivity ........................................................... 1-5 Figure 1-5. The CPX8216T H.110 Bus ............................
Resumen del contenido incluido en la página 13
List of Tables Table 2-1. CompactPCI Boards ............................................................................... 2-1 Table 2-2. USB 0 Connector J18 ............................................................................. 2-4 Table 2-3. USB 1 Connector J17 ............................................................................. 2-4 Table 2-4. 10BaseT/100BaseTx Connector J8 ........................................................ 2-5 Table 2-5. COM1 Connector J15 .............
Resumen del contenido incluido en la página 14
Table 5-13. PMC I/O Connector (J2) .................................................................... 5-14 Table 5-14. PMC I/O Connector (J21) .................................................................. 5-15 Table 5-15. Keyboard/Mouse P/S2 Connector Pin Assignments (J14) ................. 5-32 Table 5-16. Ethernet Connector Pin Assignments (J13 and J18) .......................... 5-33 Table 5-17. Serial Port Connector Pin Assignments (J21 and J10) ......................................
Resumen del contenido incluido en la página 15
Table 6-24. P5 Connector, CPU Transition Module Slots .................................... 6-27 Table 6-25. P3 Connector, CPU Transition Slots 7 and 9 ..................................... 6-28 Table 6-26. P5 Connector, HSC/Bridge (Slots 8 and 10) ...................................... 6-29 Table 6-27. P4 Connector, HSC/Bridge (Slots 8 and 10) ...................................... 6-29 Table 6-28. P3 Connector, HSC Slots 8 and 10 .................................................... 6-31 Table 6
Resumen del contenido incluido en la página 16
About this Manual This manual is directed at the person who needs detailed configuration and specification information for CompactPCI modules and system subassemblies of the CPX8000 series computer system. Included is an overview of the system architecture for the CPX8216 and CPX81216T systems. It also presents the correct strapping and pin-out information for the modules and subassemblies covered. This manual does not provide installation, removal, or use procedures. People requiring this
Resumen del contenido incluido en la página 17
Date Change Power distribution information added, see Power Distribution Panel on page 6-54. August 2001 Details about assigning chassis IDs on the CPX8216T system added. See Chassis ID for CPX8216T on page 1-13. Updated model numbers, see Systems Supported in this section. April 2001 Added cautions regarding hot swap software and hot swappable drives. July 2000 Updated pin assignment tables for connector P2 (HSC and CPU slots.) March 2000 DC Input voltage changed to -36Vdc to -72Vdc. Chan
Resumen del contenido incluido en la página 18
Systems Supported This information in this manual applies to the modules and subassemblies supported by the following systems: Model Number Description CPX8216SK24 CPX8216 Dual SCSI 466 MHz PowerPC Starter Kit, 256MB CPX8216TSK24 CPX8216T Dual EIDE 700 MHz Pentium Starter Kit, 512MB CPX8216SK25 CPX8216 Dual EIDE 700 MHz Pentium Starter Kit, 512MB CPX8216TSK25 CPX8216T Dual EIDE 466 MHz PowerPC Starter Kit, 256MB xxi
Resumen del contenido incluido en la página 19
Overview This manual is divided into the following topics: ❏ Chapter 1, System Architecture ❏ Chapter 2, CPU Modules ❏ Chapter 3, CPX8540 Carrier Card ❏ Chapter 4, PMC Modules ❏ Chapter 5, Transition/Bridge Modules ❏ Chapter 6, Subassembly Reference ❏ Appendix A, Specifications ❏ Appendix B, Related Documentation Comments and Suggestions Motorola welcomes and appreciates your comments on its documentation. We want to know what you think about our manuals and how we can make them better. Mail c
Resumen del contenido incluido en la página 20
Conventions Used in This Manual The following typographical conventions are used in this document: bold is used for user input that you type just as it appears; it is also used for commands, options and arguments to commands, and names of programs, directories and files. italic is used for names of variables to which you assign values. Italic is also used for comments in screen displays and examples, and to introduce new terms. courier is used for system output (for example, screen displays,
