Manual de instrucciones de Black & Decker MINI BRIGHT BAR MWLB14B

Resumen del contenido incluido en la página 1

90535587 MWLB14B.qxp 3/24/08 12:29 PM Page 7
The first, which will result in exchanges only, is to return the product to the
retailer from whom it was purchased (provided that the store is a participating
retailer). Returns should be made within the time period of the retailer’s policy
for exchanges (usually 30 to 90 days after the sale). Proof of purchase may be
required. Please check with the retailer for their specific return policy regarding
returns that are beyond the time set for exchan

Resumen del contenido incluido en la página 2

90535587 MWLB14B.qxp 3/24/08 12:29 PM Page 1 • AVOID UNINTENTIONAL STARTING. Don’t carry plugged-in appliance with GENERAL SAFETY WARNINGS AND INSTRUCTIONS FOR ALL APPLIANCES finger on switch. Be sure switch is off when plugging in. READ ALL INSTRUCTIONS • GROUND FAULT CIRCUIT INTERRUPTER (GFCI) protection should be WARNING: Read all instructions before operating product. Failure to follow provided on the circuits or outlets to be used. Receptacles are available all instructions listed below

Resumen del contenido incluido en la página 3

90535587 MWLB14B.qxp 3/24/08 12:29 PM Page 3 CAUTION: Used without the safety alert symbol indicates a potentially Material Regulations (HMR) actually prohibit transporting batteries in hazardous situation which, if not avoided, may result in property damage. commerce or on airplanes (i.e. packed in suitcases and carryon luggage) UNLESS they are properly protected from short circuits. So when transporting RISK OF UNSAFE OPERATION. When using tools or equipment, basic safety individual batteri

Resumen del contenido incluido en la página 4

90535587 MWLB14B.qxp 3/24/08 12:29 PM Page 5 ™ POWER SUPPLY • Only use the Hanging Hook for hanging the Bright Bar . The Hanging Hook is not intended to support additional weight. Do not attach or hang anything The unit is powered by three “AA” alkaline dry cell batteries (not supplied). additional to the light or risk of breakage may occur. Using the ribs on the bottom of the base as a grip, unscrew the bottom (counter clockwise) and remove cap. Insert batteries as described in CARE AND MAIN