Resumen del contenido incluido en la página 1
METROLOGIC INSTRUMENTS, INC.
™
IS1650 FocusE
Area Imaging Bar Code Scanner
Installation and User’s Guide
Resumen del contenido incluido en la página 2
Copyright © 2008 by Metrologic Instruments, Inc. All rights reserved. No part of this work may be reproduced, transmitted, or stored in any form or by any means without prior written consent, except by reviewer, who may quote brief passages in a review, or provided for in the Copyright Act of 1976. Trademarks Metrologic is a registered trademark of Metrologic Instruments, Inc. Products identified in this document are hereby acknow
Resumen del contenido incluido en la página 3
TABLE OF CONTENTS INTRODUCTION Product Overview............................................................................................. 1 Key Product Features....................................................................................... 1 Applications and Protocols ............................................................................... 2 Scanner and Accessories................................................................................. 3 Design Specifications
Resumen del contenido incluido en la página 4
TABLE OF CONTENTS Visual Indicators............................................................................................. 23 Failure Modes................................................................................................. 24 Depth of Field by Minimum Bar Code Element Width .................................... 25 IR Activation Range........................................................................................ 26 MAINTENANCE Daily Maintenance...............
Resumen del contenido incluido en la página 5
INTRODUCTION PRODUCT OVERVIEW The IS1650 is a high performance area imaging bar code scanner that utilizes a high-resolution CMOS imaging sensor for unrivaled image quality. The IS1650 is the choice of 2D imaging scanners that delivers superior performance for presentation and fixed-mount applications. The IS1650 employs Omniplanar, Inc.’s SwiftDecoder™ software, for reliable decoding of all 1D and 2D bar code symbologies. Omnidirectional scanning capabilities and an exten
Resumen del contenido incluido en la página 6
INTRODUCTION APPLICATIONS AND PROTOCOLS The model number on each scanner includes the scanner number and factory default communications protocol. VERSION SCANNER COMMUNICATION PROTOCOL(S) IDENTIFIER 14 RS232 (TX, RX, RTS, CTS, DTR) 38 Low Speed USB and RS232 Transmit/Receive IS1650 - Keyboard Wedge, Stand-Alone Keyboard and 47 RS232 Transmit/Receive IBM 46xx RS485, Full Speed USB, and 106 RS232 Transmit/Receive The IS1650-47 with a built-in PC Keyboard Wedge Inter
Resumen del contenido incluido en la página 7
INTRODUCTION SCANNER AND ACCESSORIES BASIC KIT Part # Description IS1650 Area Imaging Bar Code Scanner ® 00-02544 MetroSelect Single-Line Configuration Guide* 00-02281 Area Imaging Supplemental Configuration Guide* IS1650 Series Area Imaging Bar Code Scanner 00-02287 Installation and User’s Guide* * Also available for download on the Metrologic website - www.metrologic.com OPTIONAL ACCESSORIES Part # Description AC to DC Power Transformer Regulated 5.2VDC @ 1
Resumen del contenido incluido en la página 8
INTRODUCTION SCANNER AND ACCESSORIES OPTIONAL ACCESSORIES Part # Description IS1650 Scanner Interface Specific Cables RS232 PowerLink Cable with Built in Power Jack, 59-59000-3 straight, black Keyboard Wedge PowerLink Cable with Adapter Cable, 54-54002-3 straight, black 54-54020-3 Stand Alone Keyboard PowerLink Cable, straight, black 59-59313-N-3 USB Power/Communication Cable, straight, black Metrologic Voltage Converter (MVC) Cable* MVC-3M106S-IB9 ±12VDC to +5.2VDC, straigh
Resumen del contenido incluido en la página 9
INTRODUCTION SCANNER AND ACCESSORIES OPTIONAL ACCESSORIES Part # Description 00-02001 IS1650 Series Stand Installation Guide 46-00710 Flex Stand, Kit Flex Stand, Kit Components a. Stand Base...............................................................................Qty. 1 b. Flexible Shaft............................................................................Qty. 1 c. Flexible Shaft Cover ................................................................Qty. 1
Resumen del contenido incluido en la página 10
INTRODUCTION DESIGN SPECIFICATIONS IS1650 DESIGN SPECIFICATIONS OPERATIONAL Light Source: LED 645 nm Pulse Duration: 1 ms to 8 ms Maximum Output Maximum 85 mA emits 3,120 mlm of an Osram LED: 0 mm – 254 mm (0" – 10") for Depth of Scan Field: 0.330 mm (13 mil) Bar Code at Default Setting 49 mm W x 19 mm H (1.9" W x 0.8"H) at 20 mm (0.8") Field of View: 264 mm x 106 mm (10.4"W x 4.2" H) at 280 mm (11.0") Minimum Bar Width: 0.127 mm (5.0 mil) Long Range: 0 mm – 203 mm (
Resumen del contenido incluido en la página 11
INTRODUCTION DESIGN SPECIFICATIONS (CONT.) IS1650 DESIGN SPECIFICATIONS ELECTRICAL Input Voltage: 5.0VDC ± 0.25V Peak = 2 W (Typical) Operating = 1.65 W (Typical) Power: Idle / Standby = 800 mW (Typical) Peak = 400 mA (Typical) Current: Operation = 330 mA (Typical) Idle / Standby = 160 mA (Typical) DC Transformer: Class 2; 5.2VDC @ 1 AMP For Regulatory Compliance information, see pages 40- 42 ENVIRONMENTAL Operating = 0°C to 40° (32° to 104°F) Temperature: Storage
Resumen del contenido incluido en la página 12
BASE MODEL CHARACTERISTICS IS1650 SCANNER Components Figure 1. Scanner Components Item Description 1 Red Window LED Aperture 2 Blue LED See Visual Indicators (on page 23) 3 White LED See Visual Indicators (on page 23) 4 Yellow LED See Visual Indicators (on page 23) 5 Trigger Initiates Bar Code Read 6 Speaker See Audible Indicators (on page 22) 10-pin RJ45, Female Socket, 7 Cable Connection See Scanner Pinout Connections (on page 36) 8 Cable Release See The PowerLink
Resumen del contenido incluido en la página 13
BASE MODEL CHARACTERISTICS IS1650 SCANNER Dimensions Figure 2. Scanner Dimensions Figure 3. M3 Mounting Hole Dimensions Caution: The depth of each mounting hole is 12 mm (0.5"). For fixed mount, the mounting screws should not be over-tightened or go deeper than 10 mm (0.4") passing the bottom surface of the unit. Going further may cause serious damage to the unit and void the manufacturer warranty. 9
Resumen del contenido incluido en la página 14
BASE MODEL CHARACTERISTICS IS1650 SCANNER Caution and Serial Number Labels Each scanner has a label located on the bottom of the unit, as well as text embedded into the bottom casing. This label provides the unit’s model number, date of manufacture, serial number, CE and caution information. The following figure gives an example of the label/text and their location. Figure 4. Label Samples and Location Caution: To maintain compliance with applicable stan
Resumen del contenido incluido en la página 15
INSTALLATION THE POWERLINK CABLE Connecting Important: If the PowerLink cable is not fully ‘latched’, the unit can power intermittently. Figure 5. Figure 6. Disconnecting Before removing the cable from the scanner, Metrologic recommends that the power on the host system is off and the power supply has been disconnected from the PowerLink cable. Figure 7. Releasing the PowerLink Cable 1. Locate the small ‘pin-hole’ on the bottom of the unit near the cable.
Resumen del contenido incluido en la página 16
INSTALLATION CABLE INSTALLATION (INTERFACE SPECIFIC) RS232 IS1650-14 1. Turn off the host device. 2. Plug the male 10-pin RJ45 end of the PowerLink cable into the 10-pin socket on the IS1650. There will be an audible click when the connector lock engages. 3. Connect the 9-pin D-type connector of the communication cable to the proper COM port of the host device. 4. Plug the power supply into the power jack on the PowerLink cable. Check the AC input requirements
Resumen del contenido incluido en la página 17
INSTALLATION CABLE INSTALLATION (INTERFACE SPECIFIC) Keyboard Wedge IS1650-47 1. Turn off the host device. 2. Plug the 10-pin RJ45 male end of the PowerLink cable into 10-pin socket on the IS1650. There will be an audible click when the connector lock engages. 3. Disconnect the keyboard from the host device. 4. Connect the “Y” ends of the communication cable to the keyboard and keyboard port on the host device. If necessary, use the male/female adapter cable suppli
Resumen del contenido incluido en la página 18
INSTALLATION CABLE INSTALLATION (INTERFACE SPECIFIC) Stand Alone Keyboard IS1650-47 1. Turn off the host device. 2. Plug the male 10-pin RJ45 end of the PowerLink cable into the 10-pin socket on the IS1650. There will be an audible click when the connector lock engages. 3. Plug the other end of the communication cable into the host’s keyboard port. 4. Plug the external power supply (required) into the power jack on the PowerLink cable. Check the AC input requirem
Resumen del contenido incluido en la página 19
INSTALLATION CABLE INSTALLATION (INTERFACE SPECIFIC) IBM 46xx RS485 IS1650-106 1. Turn off the host device. 2. Plug the male 10-pin RJ45 end of the MVC cable into the 10-pin socket on the IS1650. There will be an audible click when the connector lock engages. 3. Connect the other end of the MVC cable to the host device. 4. Turn on the host device. 5. The IS1650 will start to initialize. All LEDs (yellow, white, and blue) will light for approximately two second
Resumen del contenido incluido en la página 20
INSTALLATION CABLE INSTALLATION (INTERFACE SPECIFIC) Integrated USB: Low Speed IS1650-38 Full Speed IS1650-106 1. Turn off the host device. 2. Plug the male 10-pin RJ45 end of the USB cable into the 10-pin socket on the IS1650. There will be an audible click when the connector lock engages. 3. Plug the USB type A end (locking with power or non-locking, depending upon host setup) of the USB cable into the host’s USB port. 4. Turn on the host device. 5. The IS16
