Resumen del contenido incluido en la página 1
Cordless Impact Driver
Operating Instructions
Model No: EY6506
IMPORTANT
This manual contains safety information. Read manual completely before fi rst using
this product and save this manual for future use.
Resumen del contenido incluido en la página 2
cation. . GENERAL SAFETY GENERAL SAFETY A moment of inattention while operating power tools may result in serious per- R RU ULES - FOR ALL LES - FOR ALL sonal injury. 7) Dress properly. Do not wear loose B BA AT TTER TERY Y OPERA OPERAT T-- clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves ED ED T TO OOLS OLS away from moving parts. Loose clothes, jewelry, or long hair can W WA ARNING! RNING! be caught in moving parts. READ AND UNDERSTAND ALL INSTRUCTIONS.
Resumen del contenido incluido en la página 3
Such preventive safety measures Contact with a “live” wire will also make reduce the risk of starting the tool acci- exposed metal parts of the tool “live” dentally. and shock the operator. 16) Store idle tools out of reach of chil- 2) Wear ear protectors when using the dren and other untrained persons. tool for extended periods. Tools are dangerous in the hands of Prolonged exposure to high intensity untrained users. noise can cause hearing loss. 17) When battery pack is not in use, k
Resumen del contenido incluido en la página 4
6) Make sure cord is located so that it will not be stepped on, tripped over, or oth- W WA ARNING: RNING: erwise subjected to damage or stress. Some dust created by power sanding, 7) An extension cord should not be used sawing, grinding, drilling, and other unless absolutely necessary. construction activities contains chemi- Use of improper extension cord could cals known to the State of California result in a risk of fire and electric shock. to cause cancer, birth defects or other If
Resumen del contenido incluido en la página 5
or ABOVE 40°C (104°F). This is very ed may result in a risk of fire, electric important in order to maintain optimal shock, or injury to persons. condition of the battery pack. 23) Do not short the battery pack. A battery 17) D o not incinerate the battery pack. It short can cause a large current flow, can explode in a fire. over heating and create the risk of fire or personal injury. 18) A void dangerous environment. Do not use charger in damp or wet locations. 24) NOTE: If the supply co
Resumen del contenido incluido en la página 6
Forwar Forward d Rotation Switc Rotation Switch h .A ASSEMBL SSEMBLY Y Operation Operation Attac Attach hing or remo ing or remov ving bit ing bit 1. Push the lever for forward rotation. NOTE: 2. Depress the trigger switch slightly to When attaching or removing a bit, start the tool slowly. disconnect battery pack from tool or place the switch in the center posi- 3. The speed increases with the amount tion (switch lock). of depression of the trigger for efficient tightening of screws. T
Resumen del contenido incluido en la página 7
When operating with a Ni-MH bat- ly in green color. tery pack, make sure the place is well- 5. When in any of the conditions that venti lated. battery pack is too cool, or the bat- tery pack has not been used for a Battery Pack Life long time, the charging lamp is lit. In The rechargeable batteries have this case, charging takes longer to a limited life. If the operation time fully charge the battery pack, than the becomes extremely short after standard charging time. recharging, repl
Resumen del contenido incluido en la página 8
.LAMP INDICA .LAMP INDICAT TIONS IONS Charger is plugged into the AC outlet. Ready to charge. Red Flashing Now charging Red Lit Charging is completed. Green Flashing quickly Battery pack is warm. Charging will begin when temperature of battery pack drops. Orange Lit Charging is not possible. Clogged with dust or malfunction of the battery pack. Orange Flashing .. MAINTENANCE MAINTENANCE Use only a dry, soft cloth for wiping the unit. Do not use a damp cloth, thinner, ben- zine, or other volat
Resumen del contenido incluido en la página 9
Bolt Tightening Conditions ( % ( % ! ’ #+ * $ %&& ’" )### * &’& ! "# $
Resumen del contenido incluido en la página 10
. A ACCESSORIES CCESSORIES Use only bits suitable for size of drill. MAXIMUM RECOMMENDED CAPACITIES Model EY6506 Wood screw ø 5.8 mm (7/32") 75 mm (3") Yellow pine Screw driving Self-drilling screw ø 4.0 mm (5/32") 13 mm (1/2") SPC t = 1.6 mm (1/16") Standard bolt : M12 Bolt fastening High tensile bolt : M10 .. SPECIFICA SPECIFICAT TIONS IONS MAIN UNIT Model EY6506 Motor DC Motor 12 V No load speed 0 ~ 2800 /min (rpm) Maximum torque 98.0 Nm, (1000 k f-cm, 867 in-lbs) Impact per minute 0 ~ 3000
Resumen del contenido incluido en la página 11
BATTERY CHARGER Model EY0110 Electrical rating See the rating plate on the bottom of the charger. Weight 0.78 k , (1.72 lbs.) 7.2V 9.6 V 12V 15.6V 18V 24V EY9065 EY9080 EY9001 EY9066 EY9086 EY9006 1.2Ah 20min. EY9180 EY9101 EY9182 1.7Ah 25min. Charging time EY9168 EY9106 EY9136 EY9117 2.0Ah 30min. 30min. 60min. EY9200 EY9230 EY9210 3.0Ah 45min. 90min. EY9201 EY9231 EY9251 3.5Ah 55min. 65min. NOTE: This chart may include models that are not available in your area. Please refer to the catalogue
Resumen del contenido incluido en la página 12
30-DA 30-DAY Y QUALITY QUALITY SA SAT TISF ISFA ACTION GUARANTEE: CTION GUARANTEE: If you are dissatisfi ed with any Panasonic Cordless Power Tool for any reason, simply return it to the place of purchase with a dated proof of purchase, in the original packaging, with all accessories, parts and instructions, within 30 days of the date of purchase, for a full refund, or call Panasonic at 201-392-6655. Abuse or misapplication of any power tool voids the guarantee. PANASONIC CONSUMER ELECT
