Manual de instrucciones de Harbor Freight Tools 92849

Resumen del contenido incluido en la página 1

1/4” Air Ratchet Wrench 1/4” Air Ratchet Wrench 1/4” Air Ratchet Wrench
1/4” Air Ratchet Wrench 1/4” Air Ratchet Wrench
92849
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
®
Copyright © 2005 by Harbor Freight Tools . All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical que

Resumen del contenido incluido en la página 2

Specifications Castaluminum Bodywith Operating Speed 250 rpm at90 psi Construction: Machined SteelRatchet and Torque: Regulator Controlled torque AM ir Consumption:1: 3.5 SCFT) orque 33 ft/lbs (C.W.) 31 ft/lbs (C.C.W. AT ir InletSize:1: /4" - 18 NP S" quare Drive 1/4 O. verallDimensions:8: -1/2"L x2-1/4"Hx1-1/2" DiaN. etWeight 1.6 Lbs Mi ax.Working Pressure:9: 0 ps Oe perating Direction Reversibl Save This Manual You will need the manual for the safety warnings and precautions, assembly instruct

Resumen del contenido incluido en la página 3

6. Dress properly while working. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair. 7. Use eye and ear protection. Always wear ANSI approved impact safety goggles. Wear a full face shield if you are producing metal filings or wood chips. Wear an ANSI approved dust mask or respirator when working around metal, wood,

Resumen del contenido incluido en la página 4

16. Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools. 17. Do not operate tool if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the tool. 18. Use proper

Resumen del contenido incluido en la página 5

Operation 1. Install a standard 1/4” Air Connector (not included) to the Air Inlet (15). First wrap the threaded portion of the 1/4” air connector with pipe thread seal tape before threading it into the Air Inlet (15). Tighten securely. 2. Attach a standard quick connector (not included) to your 3/8” i.d. air pressure source hose. Then attach the air hose to the Air Ratchet Wrench. NOTE: If you are not using an automatic in-line oiler, add a few drops of pneumatic oil to the Air Inlet (15) befor

Resumen del contenido incluido en la página 6

6. Adjust the Air Regulator (13) to the desired torque setting. NOTE: The actual torque delivered at each of the several torque settings will depend on the air pressure supplied to the tool. We suggest that you test the actual torque by tightening a nut or bolt on a test piece using each setting, then observing the resultant Note: Never over- torque by using a mechanical torque wrench (not supplied). tighten the nut or bolt; damage may result 7. If installing a nut or bolt, set it as tight as po

Resumen del contenido incluido en la página 7

Maintenance 1. Your Air Ratchet Wrench should be kept clean, dry and lightly oiled. 2. When not in use, store your tool in a suitable place where it will not be exposed to water, corrosive materials, or undue banging around. 3. If you are not using an in-line oiler, you should inject a few drops of pneumatic oil into the air inlet of the tool after every hour of continuous use. 4. If your tool loses power, or you notice air leaks, take it to a certified technician for service. Parts List Pn art

Resumen del contenido incluido en la página 8

Assembly Drawing PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS S