Manual de instrucciones de Grizzly Planishing Hammer G0497

Resumen del contenido incluido en la página 1

MODEL G0497
PLANISHING HAMMER
INSTRUCTION SHEET
This machine presents
serious injury hazards
to untrained users.
Read through this entire
instruction sheet to
become familiar with
the controls and opera-
tions before starting the
machine!
Figure 1. Model G0497 Planishing Hammer.
The Model G0497 has a maximum operating
pressure of 120 psi. exceeding this maxi-
Introduction
mum can lead to high pressure parts failure,
Great for all sheet metal forming, the Model
which may cause serious p

Resumen del contenido incluido en la página 2

5. Plug the planishing hammer into the power Operation supply. 1. Connect the planishing hammer to the air supply as shown in Figure 2. 6. With the workpiece between the hammer and anvil (Figure 4), depress the foot pedal to begin planishing. ���������� ������ ������ ��������� ���� ����������� ������ ������� Hammer �������� ���������� ���������������� Figure 2. Correct air supply setup. Anvil 2. Set the desired air pressure between 90-120 PSI using the filter/regulator dial. A lower air pr

Resumen del contenido incluido en la página 3

G0497 Parts Breakdown �� �� �� �� �� �� �� �� ���� �� ���� �� �� �� �� �� �� �� �� �� �� �� �� �� �� ���� �� �� � �� �� � �� � �� ���� �������� ���� � �� �� �� �� �� �� �� ���� �� �� �� �� �� �� �� �� �� �� �� �� �� �� ���� � �� �� �� �� �� �� �

Resumen del contenido incluido en la página 4

G0497 Parts List REF PART # DESCRIPTION REF PART # DESCRIPTION 1A P0497001A MAIN HAMMER FRAME-N/S 1/07 24 P0497024 HOSE CLAMP 2 P0497002 SUPPORT BRACKET 25 P0497025 FLEXIBLE HOSE 5/16" x 9-1/16" 3 P0497003 BRACE 26 P0497026 FOOT SWITCH 4 P0497004 END COVER 27 P0497027 CORRUGATED PLASTIC TUBE 5 P0497005 UPPER HAMMER CLAMP 28 P0497028 SOLENOID VALVE 6 P0497006 LOWER HAMMER CLAMP 29 P0497029 AIR CONTROL ASSEMBLY 8 PR21M INT RETAINING RING 35MM 29-1 P0497029-1 FILTER/REGULATOR UNIT 9A P0497009A ANV