Resumen del contenido incluido en la página 1
s s e e e e
Installation and User Manual
DTS Pro Series
surround
encoder
A Full-Featured Suite for Today’s Digital Audio Workstation
Resumen del contenido incluido en la página 2
Confidential Contains confidential proprietary information owned by Digital Theater Systems, Inc., including but not limited to trade secrets, know-how, technical and business information. Not for disclosure except under terms of a Non-Disclosure Agreement accepted by recipient and by an actually authorized agent of Digital Theater Systems, Inc. Unauthorized disclosure is a violation of State, Federal, and International laws. NOT FOR USE EXCEPT UNDER TERMS OF A VALIDLY EXECUTED WRITTEN LICENSE A
Resumen del contenido incluido en la página 3
Installation and User Manual – DTS Pro Series Surround Encoder Contents 1. INSTALLATION 2 1.1. PC Standalone Installation 2 1.2. Mac Standalone Installation 3 2. OVERVIEW 6 3. USING THE PRO PACKER 7 4. ENCODING IMMEDIATELY AFTER PACKING 12 5. USING THE ENCODER IN STANDALONE MODE 14 6. ENCRYPTING A FILE 18 6.1. Decrypting a File 19 7. DVD AUTHORING FOR DTS 20 8. UNINSTALLING THE SOFTWARE 20 9. DIALOG NORMALIZATION 21 1
Resumen del contenido incluido en la página 4
DTS Pro Series Surround Encoder – Installation and User Manual 1. Installation 1.1 PC Standalone Installation System requirements ■ PC computer, Pentium 4, 1GHz or higher (recommended) ■ 256 MB RAM ■ 1 hard drive, 7200 RPM minimum, 200 MB free disk space ■ Greater than 20 GB disk space for audio files USB port for the license adapter key (dongle) ■ ■ Windows XP Home edition or XP Professional (SP1) Surround Encoder installation procedure The installation of the Surround Encoder software onto a P
Resumen del contenido incluido en la página 5
Installation and User Manual – DTS Pro Series Surround Encoder 3. Install the adapter key (dongle) (DTS #E907-02) into a USB port on your PC after the software has completed installation. Note: It is the responsibility of the owner of the DTS Pro Series Surround Encoder to keep the adapter key (dongle) in a safe and secure location. If the adapter is lost, DTS has no obligation to replace it. If the adapter is damaged or malfunctioning, DTS will replace the adapter at no charge during the w
Resumen del contenido incluido en la página 6
DTS Pro Series Surround Encoder – Installation and User Manual Important: Proper privileges are required to install and uninstall Surround Encoder software, including the WIBU driver for the auto-detected adapter key. Displaying System information Click the Apple icon at the top left of the screen and select About this Mac. The operating system name will display in a pop-up box, along with the version number. Click the More Info... button to inspect other settings. To see which version of Ja
Resumen del contenido incluido en la página 7
Installation and User Manual – DTS Pro Series Surround Encoder 5. Double-click the blue WIBU Vise icon to launch the installer. Choose Easy Install . The wizard will take you through the rest of the procedure. 6. Install the DTS Encoder. Double-click on the icon DTSProSeriesEncoder.pkg to start the installer. The wizard will take you through the rest of the procedure. Important: The package must be installed onto the root volume of the operating system. Applications are installed in the fol
Resumen del contenido incluido en la página 8
DTS Pro Series Surround Encoder – Installation and User Manual 2. Overview There are three components to the Pro Series Surround Encoder system, Pro Packer, Pro Encoder, and Pro Encrypter utility. Important: All audio files to be encoded must first be processed using the Pro Packer. Start with the Pro Packer The purpose of the Pro Packer is to bring all the source audio files together into a single file. The Pro Packer checks the length of the files and the sample rate, to ensure that you
Resumen del contenido incluido en la página 9
Installation and User Manual – DTS Pro Series Surround Encoder 3. Using the Pro Packer Start the DTS Multi-channel Pro Packer (activate the Pro Packer icon). The Pro Packer screen will display. Figure 2. Pro Packer — Initial screen Our example In this example, 48 kHz files are being packed and then encoded to produce a DTS 5.1 DVD. 1. Select channel mapping L C R for the front channels. See Table 1, page 11. 2. Select Ls Rs channel mapping for the surround channels. See Table 1, page 11. 7
Resumen del contenido incluido en la página 10
DTS Pro Series Surround Encoder – Installation and User Manual 3. LFE is set to ON. See Table 1, page 11. 4. Sample rate is set to 48 kHz. The Sample rate here must match the sample rate of the source files. See note 1, after step 12, page 10. 5. 3 dB Rear channel attenuation is left OFF. 3 dB rear channel attenuation is used in cases where you have a theatrical master that has not been remixed or repurposed for DVD, and the rear surrounds (right and left) are typically 3 dB higher than they s
Resumen del contenido incluido en la página 11
Installation and User Manual – DTS Pro Series Surround Encoder 10. Frame rate: If the audio track is intended to sync with video, be sure to match its frame rate. If the video reference is drop frame , you MUST select drop frame here. If it is important to match the start of the audio track to some specific point in the video, enter the Start time here, in hours:minutes:seconds:frames (hh:mm:ss:ff) format. The End time will be calculated automatically, based on the length of the Input Files and
Resumen del contenido incluido en la página 12
DTS Pro Series Surround Encoder – Installation and User Manual 12. Repeat step 11 for the other channels. Sample rate Bit depth Duration (hh:mm:ss:ff) Input files have been selected for all channels. For each input file, the sample rate, bit depth, and duration is identified. See note 1, below. Use the duration information to check that the input files are identical in length. See note 2, below. Special Case: This packer will accept a stereo source file to assign to a single channel. The pulldow
Resumen del contenido incluido en la página 13
Installation and User Manual – DTS Pro Series Surround Encoder Click “Pack and Encode” to generate the packed file and launch the encoder. (If the output file already exists, the Packer will prompt you to overwrite it.) The above prompt will display when the packing is finished. Then the Surround Encoder program will be automatically activated (next step). At this point, the packed file(.agm extension) will be found in the output directory. All packed files have the .agm extension. Table 1 Chann
Resumen del contenido incluido en la página 14
DTS Pro Series Surround Encoder – Installation and User Manual 4. Encoding Immediately after Packing Since we chose “Pack and Encode” in our example, the Pro Surround Encoder program starts automatically when the Packer is finished (Figure 3) and runs in a separate window on the desktop. Figure 3. DTS Pro Series Surrounf Encoder Screen 1. Almost all the settings on this page are carried over from the Packer program. By default, Use source file directory and Use source file name are checked (as i
Resumen del contenido incluido en la página 15
Installation and User Manual – DTS Pro Series Surround Encoder 3. These fields are automatically filled with information carried in the packed file. Reset — click this button to reload the values from the packed file, if necessary. 4. Bit Rate and Output type For 44.1 kHz and 88.2 kHz source files, only one bit rate (1234800) and output type (.wav) are possible. With 48 kHz source files for DVD encoding, Bit rate is selectable: 1509750 bits (1.5 Mbps) or 754500 (754 kbps). With 48 kHz source fi
Resumen del contenido incluido en la página 16
DTS Pro Series Surround Encoder – Installation and User Manual 5. Click the Encode button. A window will prompt you to review the encoder settings and confirm. Click Encode. A progress bar will display. 6. When encoding is finished, a confirmation prompt will appear. It indicates the output file name and location. Click OK. In the Output directory, you will see two additional files, the .log (encoding report) and the .cpt (encoded) file. 5. Using the Encoder in Standalone Mode The DTS-Surround
Resumen del contenido incluido en la página 17
Installation and User Manual – DTS Pro Series Surround Encoder Click “Pack local file” to generate the output file. (If the output file already exists, the Packer will prompt you to overwrite it.) This prompt will display when the packing is finished. In the selected output directory, you will see an additional file — the .agm packed file. 2. In the Source file section, use the Browse function to select the packed.agm file that you want to encode. In this example, DTS Test 4.agm has been selecte
Resumen del contenido incluido en la página 18
DTS Pro Series Surround Encoder – Installation and User Manual 6. In the DTS Settings section, choose the Bit Rate, Output type, and Dialog Normalization factor. (See step 4 on page 13 for explanation.) 3dB rear channel attenuation is display-only here. This parameter is set in the Packer. (See step 5 on page 8 for explanation.) Bit Rate and Output type fields are automatically determined by the sample rate of the source material. For 44.1 kHz and 88.2 kHz source files, only one bit rate (123480
Resumen del contenido incluido en la página 19
Installation and User Manual – DTS Pro Series Surround Encoder 7. Click the Encode button. A confirmation prompt will appear. Review the settings and, if they are OK, click Encode. 8. A status bar at the bottom of the screen will indicate the progress of the encode task. Next, a prompt will inform you that the encoding task is finished. Click OK. In the output directory, the output file (.cpt in this example) and the encoding report (.log) will be listed. 17
Resumen del contenido incluido en la página 20
DTS Pro Series Surround Encoder – Installation and User Manual 6. Encrypting a File Use the Pro Encrypter program to encrypt an .agm packed file for sending over an unsecure network to another location. The DTS Pro Encrypter screen will display. Figure 4: Encryption Utility screen 1. In the Source section, use the Browse function to select the source .agm file to be encrypted. The information about the source file will be imported automatically. In this example, the DTS Test 4.agm has a sample
