Manual de instrucciones de Yamaha NS-AP8805

Resumen del contenido incluido en la página 1

NS-AP8805
HOME CINEMA SPEAKER PACKAGE
CONTENTS
CONSUMER PRECAUTIONS ............................................................................ 2
UNPACKING .......................................................................................................3
SETTING UP THE SPEAKERS .......................................................................... 4
CONNECTIONS TO THE RECEIVER ................................................................ 6
SPEAKER PLACEMENT ........................

Resumen del contenido incluido en la página 2

CONSUMER PRECAUTIONS Read these precautions carefully before operating your NS-AP8805 speakers. l Since these speakers can be wall mounted, it is essential that they are firmly secured. Be sure to consult a reliable source about the best type of hanger for your particular wall’s construction. Secure installation is the purchaser’s responsibility. l Do not attach them to thin plywood or soft wall surface materials as the screws may tear free, causing the speakers to fall and be damaged, o

Resumen del contenido incluido en la página 3

UNPACKING After unpacking, check that following items are contained. Front speaker x 2 Center speaker x 1 (NS-AP8805C) Surround speaker x 2 (NS-AP8805F) (NS-AP8805S) Spacer for pedestal x 2 (for front speaker) Rubber base x 2 (for center speaker) Double-sided adhesive tape x 2 (for center speaker) Pedestal x 2 (for front speaker) Fastener x 2 (for center speaker) Bolts x 6 (1/4" x 1-1/4" f or pedestals) Wall mounting rubber pads 4 pcs x 5 (for all speaker units for wall-mount) (1 0 x 5 mm) Non-

Resumen del contenido incluido en la página 4

SETTING UP THE SPEAKERS l Attaching the pedestals to the front speakers Non-skid pad Bolt (When not wall mounting) Attach the pedestal to the front speaker as shown right by Philips driver using bolts supplied with the product. l Wall mounting the speakers Pedestal When mounting the speakers on a wall, attach one of the Non-skid pads wall mounting rubber pads provided near each of the corners on the rear surface of the speaker to prevent the Spacer for pedestal speaker cable from being caug

Resumen del contenido incluido en la página 5

WARNING l The each surround speaker weighs 3.53 lbs (1.6 kg) and front/center speaker weighs 5.29 lbs (2.4 kg). Do not mount the speakers on thin plywood or a wall with soft surface material, since the screws may pull away from the surface and fall. This will damage the speakers and can cause personal injury. l Do not mount the speakers on a wall with nails, adhesives, or any other unstable hardware. Long-term use and vibrations may cause them to fall. l To avoid accidents resulting from t

Resumen del contenido incluido en la página 6

CONNECTIONS TO THE RECEIVER CONNECTIONS l Check to make sure that the power has been turned off before making connections. l Connect the (+) terminal of the amplifier to the (+) terminal of the speaker. Connect the (–) terminal of the amplifier to the (–) terminal of the speaker. l Reversing polarity (+/–) will result in unnatural sound reproduction. Note Do not let the bare speaker wires touch each other as this could damage the speaker, the amplifier, or both. PROCEDURE For connections, ke

Resumen del contenido incluido en la página 7

SPEAKER PLACEMENT This speaker system consists of front, center and surround speakers. — Front speaker placement should be separated by a distance of 6–10ft. If they are placed too close together, there will be a reduction in the stereo effect. Conversely, If placed too far apart, the so called “middle- omission” effect will occur and the vocal center fill will be lost. Height of the speaker should be at least at ear level. — Center channel speakers should be placed centered above or below th

Resumen del contenido incluido en la página 8

SPECIFICATIONS Type Front, Center 3-Way Bass Reflex Surround 2-Way Acoustic Suspension Speaker Front, Center 2-1/4" white paper woofer x 4 + 3/4" silk dome tweeter Surround 2-1/4" white paper woofer x 2 + 3/4" silk dome tweeter Frequency Range Front, Center 80 Hz – 35 kHz Surround 100 Hz – 35 kHz Impedance 6 ohms Nominal Input Front, Center 40 W Surround 30 W Maximum Input Front, Center 120 W Surround 100 W Sensitivity Front, Center 83 dB/2.83 V/m