Manual de instrucciones de Philips SWW1800

Resumen del contenido incluido en la página 1

Register your product and get support at
www.philips.com/welcome
SWW1800/27
Quick Start Guide
Connect
1
Install
2
Enjoy
3

Resumen del contenido incluido en la página 2

What’s in the box SOURCE 1 SOURCE 2 SOURCE 3 SOURCE 4 1 23 4  ranmitter Transmitter User manual Quick Intallation Guide Receiver Receiver Quick Start Guide Remote control Power adaptor x 2 HDMI cable Warranty Note • Make sure you have all these items in the box. Contact your dealer for any missing or damaged items.

Resumen del contenido incluido en la página 3

1 Connect Transmitter Receiver HDMI OUT DC IN 5V DC 5V 2 1 HDMI OUT Connect the transmitter to y our HD devices 1 Connect video source to the transmitter using the HDMI cable • Connect one end of the HDMI cable (included) to the HDMI connector of the transmitter. 2 Connect the video source to the transmitter using the component cables • Connect one end of the RCA (green, blue and red) cables to the Y/Pb/Pr IN connectors of the transmitter. Connect the other end of the RCA cables to the cor

Resumen del contenido incluido en la página 4

Install 2 Install r emote control batteries 1 Open the battery compartment. 2 Insert two AAA batteries with correct polarity (+/-) as indicated. 3 Close the battery compartment. 3 Enjoy DC 5V DC 5V Turn on the power of your HDTV 1 Go to the source menu under the settings menu of your HDTV. 2 Select the HDMI input to which the receiver is connected. Note • You cannot control the receiver with the supplied remote control and the receiver follows the transmitter’s status to enter/exit t

Resumen del contenido incluido en la página 5

Switch on the transmitter Press on the remote control or transmitter in standby mode to turn it on. Select the sour ce on the transmitter Press the source buttons: 1 HDMI , 2 HDMI , 3 INPUT , 4 INPUT on the remote control or transmitter until you see the available video from your device. Note • In standby mode, a red power LED displays on the transmitter . • Depending on equipment and the input selected, between input selection/start-up and being able to see the image on your TV

Resumen del contenido incluido en la página 6

Troubleshooting There is no video displayed on my TV screen. • Verify the POWER LED and SOURCE LED indicator on the transmitter: I cannot hear any sound or the sound is poor, what do I do? • E nsure the TV volume control is adjusted correctly. • E nsure the TV volume is not set to minimum or the sound is not muted. • E nsure the audio cables of the transmitter are connected correctly. • Ensure the Audio format is recognized/supported. Long switching time due to the channel swi