Resumen del contenido incluido en la página 1
Installation and
Quick Configuration
Manual
NetBotz Room Monitor 355
NBWL0355
NBWL0356
Resumen del contenido incluido en la página 2
This manual is available in English on the enclosed CD. Dieses Handbuch ist in Deutsch auf der beiliegenden CD-ROM verfügbar. Este manual está disponible en español en el CD-ROM adjunto. Ce manuel est disponible en français sur le CD-ROM ci-inclus. Questo manuale è disponibile in italiano nel CD-ROM allegato. 本マニュアルの日本語版は同梱の CD-ROM からご覧になれます。 Instrukcja obs ługi w j ęzyku polskim jest dost ępna na CD. O manual em Português está disponível no CD-ROM em anexo. Данное ру к о во дс тво на ру с с к
Resumen del contenido incluido en la página 3
Contents Introduction 1 Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Document Overview . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Additional Documentation. . . . . . . . . . . . . . . . . . . . . 2 Additional Options . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 InfraStruXure-certified . . . . . . . . . . . . . . . . . . . . . . . . 3 Physical Description 4 Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Re
Resumen del contenido incluido en la página 4
To Install on a Linux System. . . . . . . . . . . . . . . . . . 16 Pre-configured Accounts. . . . . . . . . . . . . . . . . . . . . 16 Administrator account user ID & password . . 16 Root account user ID & password . . . . . . . . . 17 Configure Network Settings . . . . . . . . . . . . . . . . . . 17 Obtain network settings using DHCP . . . . . . . 17 Use the Serial Configuration Utility . . . . . . . . . 18 Clean the NetBotz 355 19 Specifications 19 Warranty 20 Two-Year Factory Warranty.
Resumen del contenido incluido en la página 5
Introduction Product Description ® ® The American Power Conversion (APC ) NetBotz Room Monitor 355 functions as the central hardware appliance for a NetBotz security and environmental monitoring system. The NetBotz 355 can be installed anywhere in a room and includes an integrated camera and internal sensors that monitor temperature, humidity, dew point, air flow, and motion. It also includes four sensor ports for connecting temperature, humidity, smoke, door, vibration, spot fluid, and th
Resumen del contenido incluido en la página 6
Document Overview The NetBotz Room Monitor 355 Installation and Quick Configuration Manual describes how to install a NetBotz Room Monitor 355, how to connect devices to the appliance, and how to configure network settings. After performing the configuration procedures in this manual, you can access your system through its software interface, perform additional configuration tasks, and begin monitoring the environment. Additional Documentation Unless otherwise noted, the following documenta
Resumen del contenido incluido en la página 7
Additional Options The following options are available for the NetBotz 355. For more information about any of the options, contact your APC representative or the distributor from whom you purchased your APC product. • Temperature Sensor (AP9335T) • Temperature/Humidity Sensor (AP9335TH) • NetBotz Spot Fluid Sensor (NBES0301) • NetBotz Door Switch Sensor for Rooms or Third Party Racks (NBES0302) • NetBotz Door Switch Sensor for APC Racks (NBES0303) • NetBotz Dry Contact Cable (NBES0304)
Resumen del contenido incluido en la página 8
Physical Description Front Item Description Vented internal Vented opening for airflow, temperature, and humidity sensors. sensors Network link LED Shows the status of the network connection. Blinks to indicate network traffic (green—connected at 10 Mbps; yellow—connected at 100 Mbps). Power LED Indicates whether the unit is receiving power (green—receiving power; dark—not receiving power). Camera LED Blinks steadily when the integrated camera is active. Alert LED Indicates the alert s
Resumen del contenido incluido en la página 9
Rear Item Description Sensor ports (4) Used for connecting APC sensors, third-party dry-contact sensors, and standard third-party 0-5 V sensors. Third-party dry-contact state sensors require the NetBotz Dry Contact Cable (NBES0304). Standard third-party 0-5 V sensors require the NetBotz 0-5 V Sensor Cable (NBES0305). 10/100 Base-T Provides for a 10/100 Base-T network connection and power through network port Power-over-Ethernet (PoE). (The appliance operates at 100 Base-T only.) Status
Resumen del contenido incluido en la página 10
Inventory Inspect the contents of the package to ensure that the parts included match those shown below. Report missing or damaged contents to APC or your APC reseller. However, if damage was due to shipping, immediately report the damage to the shipping agent. The shipping and packaging materials are recyclable. Please save them for later use or dispose of them appropriately. 6 NetBotz 355 Installation and Quick Configuration Manual
Resumen del contenido incluido en la página 11
Item Description NetBotz Room Monitor 355—not shown Bracket mounting plate for electrical boxes Adhesive cable tie holders Mounting screw wall anchors 13-mm (0.5-in) machine screws (for electrical box) 19-mm (0.75-in) sheet metal screws (for wall or enclosure) T-bar mounting plate 203-mm (8-in) tie wrap Ball-joint adjuster arms Extender arm set screw Cable retainer Allen wrench Rubber bracket cover Mounting plate Extender arm NetBotz Appliance Utility CD—not shown Po
Resumen del contenido incluido en la página 12
Installation Install the NetBotz 355 Choose an installation option that meets your needs. Take the following into consideration: Caution: Only connect approved devices to ports on the NetBotz 355 as directed in this manual. Plugging in other devices may result in equipment damage. Note: Consider the location of the nearest network port. Note: Make sure the camera will not be obstructed. Note: Consider cable routing for all sensors that you plan to connect to the appliance. Note: If the direc
Resumen del contenido incluido en la página 13
Wall Note: Drill 4.76-mm (3/16-in) pilot holes for wall anchors. Caution: Do not overtighten the screws. NetBotz 355 Installation and Quick Configuration Manual 9
Resumen del contenido incluido en la página 14
Ceiling 10 NetBotz 355 Installation and Quick Configuration Manual
Resumen del contenido incluido en la página 15
Enclosure Note: Use a #32 drill to make four 2.94-mm (0.116-in) pilot holes. NetBotz 355 Installation and Quick Configuration Manual 11
Resumen del contenido incluido en la página 16
Connect the NetBotz 355 to Your Network Power-over-Ethernet (PoE) injector Caution: Before you energize the NetBotz 355, review the electrical specifications on page 19 to avoid overloading the circuit. Caution: Be sure the appliance is properly grounded by plugging the power cord directly into a wall outlet or by verifying the ground path if you are using a power strip. Non-PoE-capable hub or switch PoE-capable hub or switch To appliance 10/100 Base-T network port 12 NetBotz 355 Installation
Resumen del contenido incluido en la página 17
Connect Sensors to Sensor Ports This procedure applies to the following sensors, which are supported by the NetBotz 355 and connect to the sensor ports: • Temperature Sensor (AP9335T) • Temperature and Humidity Sensor (AP9335TH) • NetBotz Spot Fluid Sensor (NBES0301) • NetBotz Door Switch Sensor for Rooms and Third Party Racks (NBES0302) • NetBotz Door Switch Sensor for APC Racks (NBES0303) • NetBotz Dry Contact Cable (NBES0304) • NetBotz 0-5 V Cable (NBES0305) • NetBotz Vibration Sens
Resumen del contenido incluido en la página 18
Adjust the Lens View the camera feed during the adjustment of the camera in lens housing order to correctly adjust the focus of the feed and field of view settings. To access the adjustment screws, remove the lens lock housing by turning the lens unlock housing counter-clockwise until the latches disengage. aperture To reattach the lens housing, engage the latches and rotate the housing clockwise until a click is heard. To adjust the aperture of the lens, rotate the aperture ring c
Resumen del contenido incluido en la página 19
Configure Your Appliance Overview This chapter explains how to set up your network settings and other configuration tasks. Gather Network Settings Information Collect the following information from your systems administrator. You will need this information to configure the network settings on your appliance. • DHCP and IP Address Information: – Does your network use a DHCP server? – If you do not use DHCP, what IP address is assigned to your appliance? • Subnet Mask Information: – Will you u
Resumen del contenido incluido en la página 20
To Install on a Windows System To install the applications and the JRE on a supported Windows system: 1. Place the NetBotz Appliance Utility CD in the CD drive of the system that you will use to configure and manage your appliance. The NetBotz Appliance Utility will start automatically. If it does not start: a. Open the CD drive in Explorer and double-click contents.htm. b. Click the NetBotz Room Monitor 355 link, click Advanced View, then click Advanced View for Windows. At the prompt, cl
