Resumen del contenido incluido en la página 1
Register your product and get support at
www.philips.com/welcome
SCD610
SCD609
User manual
Resumen del contenido incluido en la página 2
Contents 1 Introduction 4 2 Important Safety Instructions 6 Compliance information 8 Recycling 9 3 Overview 10 Parent unit 10 Baby unit 11 4 Get started 12 Charge the parent unit 12 Set up the baby unit 13 Wall mount the baby unit 13 5 Use your baby monitor 15 Operating range 15 6 Menu 16 Zoom & Pan 16 Voice activation 16 Adjust brightness 16 Add/delete cameras 16 Change the language 17 Reset 18 7 Optimize the battery life of the parent unit 19 8 Guarantee and service 19 Warranty 19 9 Frequentl
Resumen del contenido incluido en la página 3
SCD609 1 Introduction Baby unit Congratulations on your purchase and welcome
support that Philips AVENT offers, register your product at www.philips.com/AVENT. Philips AVENT is dedicated to producing caring and reliable products that give parents the reassurance that they need. This Philips AVENT baby monitor provides round-the-clock support by ensuring that you can see and hear your baby in perfect clarity. The instructions are intende
Resumen del contenido incluido en la página 4
EN 5
Resumen del contenido incluido en la página 5
! 2 Important Safety
o "
Instructions personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug a Read these instructions. is damaged, liquid has been spilled or objects have fallen into the apparatus, b Keep these instructions. the apparatus has been exposed to rain c Heed all warnings. or moisture, does not operate normally, or has been
Resumen del contenido incluido en la página 6
Use the supplied adapter to charge the When your baby monitor uses a power parent unit. outlet, make sure that you can easily access To prevent electric shock, do not open the power outlet. the housing of the baby unit or parent unit For their safety, do not allow children to play except for the battery compartments. with the baby monitor. Make sure that your hands are dry when Cleaning and Maintenance you insert or replace batteries (battery Do not immerse the parent unit o
Resumen del contenido incluido en la página 7
This equipment complies with FCC RF radiation Compliance information exposure limits set forth for an uncontrolled environment. This equipment should be installed The FCC ID number is located on the casing and operated with a minimum distance of 7 3/4 bottom of the parent unit and in the battery inches / 20 centimeters between the radiator compartment of the baby unit. and your body. For handheld operation, this $%*; equipment has been tested and meet
Resumen del contenido incluido en la página 8
Recycling Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When you see the crossed-out wheel bin symbol attached to a product, it means the product is covered by the European Directive 2002/96/EC: Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products. The correct disposal of your old product helps pr
Resumen del contenido incluido en la página 9
Solid green: The unit is running. 3 Overview f Voice activation light g Sound level lights Indicate the level of sound in your Parent unit baby's room h Key l + [UP] - [DOWN] [LEFT] a [RIGHT] k b i Menu c j Speaker j d k Video display i Signal strength indicator e h Battery power indicator f Low battery power indicator g l Antenna Connector for the supplied AC/DC adapter a ON/OFF switch Input: 100-240V AC Press and hold to turn the parent unit Output: 6.0V DC, 500 mA o
Resumen del contenido incluido en la página 10
f Lens Baby unit g Connector for the supplied DC adapter h Wall mount a i Wall mount screws Connector for the supplied AC/DC adapter Input: 100-240V AC b Output: 6.0V DC, 500 mA Model number: For UK, SSW- 1920UK-2; For the other European c f countries, SSW-1920EU-2 d For US and Canada, SSW-1920US-2 g For Australia and New Zealand, SSW- e 1920AU-2 For Mexico, SSW-1920MX-2 h i a Antenna b Power-on light In green: The baby unit is turned on c ON/OFF switch Press and hold to turn
Resumen del contenido incluido en la página 11
2 Insert the rechargeable battery. 4 Get started Charge the parent unit Note Make sure your hands and the unit are dry when you insert and remove the rechargeable battery. Do as follows to charge the parent unit before < 3 Reattach the lid. unit indicates that the battery is low. 4 Insert the plug into parent unit and put the » ^ adapter in a wall socket. the video display and the battery on/
Resumen del contenido incluido en la página 12
4 Insert the plug into the baby unit and put Tip the adapter in a wall socket. Charging normally takes 5 hours, but it takes longer when the parent unit is switched on during charging. To keep the charging time as short as possible, switch off the parent unit during charging. When the battery is fully charged, the parent unit can be used cordlessly for approximately 7 hours if it is in voice activation mode. If the video is on continuously, the parent unit can be used cordlessly for a
Resumen del contenido incluido en la página 13
4 Screw in the wall-mount. 5 Put the baby unit into the wall-mount. 6 Place the cable into the holder at the wall- mount. 7 Adjust the baby unit so that you can get a best view of your baby. 14 EN
Resumen del contenido incluido en la página 14
Tip 5 Use your baby It takes about 15 seconds to establish the link between the parent unit and the baby unit. monitor The battery symbol ^ runs out of power. To see your baby, 1 Press on the parent/baby unit. » The parent/baby unit turns on, and all Operating range indicators on the parent/baby unit light ^# The operating range of the baby monitor is 150 metres/490 feet in open air. The range varies depending on the surroundings and other disturbing
Resumen del contenido incluido en la página 15
Press the button on the side of the parent 6 Menu unit, and the voice activation indicator slowly blinks. Change voice activation sensitivity 1 Press menu button on the parent unit. 1 Press menu button on the parent unit. » Menu is displayed. 2 Select [VOICE ACTIVATION SENSITIVITY] of the baby unit. 2 Press +/- to move up or down the memu/ submenu, and press / to move left or Menu option Description right across menu/submenu. [HIGH] High voice activation sensitivity 3 !
Resumen del contenido incluido en la página 16
Note Note Only when a position is empty in the list, a new camera When only one camera is in the paired list, the camera can be paired. !## and will not be displayed. 1 Press menu button on the parent unit. 2 Press and to navigate this bar to select 2 Select [ADD/DEL CAM]. other CAMs in the list, i.e. parent unit tries » The paired CAM list is displayed. to connect to camera. » Camera icon will change to orange color when it has been selected. Note Loop
Resumen del contenido incluido en la página 17
Reset To reset the parent unit: 1 Press and hold to turn off the parent unit. 2 Press and hold - on the parent unit. 3 When you hold -, turn on the parent unit. » The parent unit is reset. 18 EN
Resumen del contenido incluido en la página 18
7 Optimize the 8 Guarantee and battery life of service the parent unit If you need service or information or if you have a problem, please visit the Philips AVENT Recharge the parent unit when website at www.philips.com/AVENT welcome you see the low battery icon. Fully or contact the Philips Consumer Care Centre recharge the parent unit before you #| use it again, as completely draining the of the Philips Consumer Care Centre in the rechargeab
Resumen del contenido incluido en la página 19
9 Frequently asked questions %} section, you can get support at www.philips.com/AVENT or contact the Philips Consumer Care Center in your country. Problems Possible causes Solutions My parent/baby unit will not The unit is not connected to the Connect the unit to a power switch on. power supply. supply. The battery is empty. Replace the battery and make sure that it is correctly inserted. My baby unit will not switch on. The unit is not connect
Resumen del contenido incluido en la página 20
The battery light on the parent The rechargeable battery of the Recharge the battery. ^ # parent unit is running low. The battery of the parent unit The volume is set too high and Decrease the volume. runs low quickly. the unit consumes more power. The video display is switched Activate the automatic voice on continuously and the unit activation mode to increase the consumes more energy. operating time. Is my baby unit secure from The 2.4GHz digital technology eavesdropping? of t
