Manual de instrucciones de Phase Technology WL-RX SUB

Resumen del contenido incluido en la página 1

R
Wireless Subwoofer Receiver
Wireless Transmitter
TE CH NO LO GY
Owners Manual / Installation Instructions

WL-RX SUB · WL-3TX
WL-RX SUB
WL-3TX
(Optional)
DESCRIPTION
The WL-RX SUB receiver works with the WL-3TX wireless transmitter to make any powered
subwoofer with a line level input into a wireless sub. This transmitter and receiver
combination will accurately reproduce low-frequency sounds and music without interference
or compression over distances up to 150 feet. The receiver’s compac

Resumen del contenido incluido en la página 2

SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK ! DO NOT OPEN CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel. Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of un-insulated “dangerous voltage: within the product’s enclosure that may be of sufficient magnitude to constitute a r

Resumen del contenido incluido en la página 3

WL-RX SUB INSTALLATION/SETUP 1. Make sure your subwoofer is turned off to avoid any possible damage. 2. The WL-RX SUB receiver includes a universal adaptor designed to operate on household power of 100-240V and 50/60 Hz. Plug the power adapter into a convenient power outlet and the small coaxial DC power plug into the transmitter socket labeled “DC In +5V”. The receiver should power up and display a red LED light on the front of the unit. 3. Connect the attached RCA audio cable labeled SUB OU

Resumen del contenido incluido en la página 4

o Turn off or relocate any equipment that might be operating on the 2.4 GHz band. o Check the distance between the transmitter and receiver and move closer if pos- sible. The audio cables can be extended if necessary for better placement positioning. o Building construction or large metal objects can reduce the strength of the radio signals. Concrete and steel do not pass radio waves well. Try relocating the receiver or transmitter to improve the signal strength. If you have any question ab