Resumen del contenido incluido en la página 1
Contents
7.1ch Home Theater System
Introduction ...................................2
Connections.................................12
HT-S5300
AV Receiver (HT-R580)
Speaker Package (HTP-580)
Front Speakers (SKF-580 L/R)
Turning On & Basic Operations ......21
Center Speaker (SKC-580)
Surround Speakers (SKR-580 L/R)
Surround Back Speakers (SKB-580 L/R)
Subwoofer (SKW-580)
®
Universal Port Option Dock for iPod
Advanced Operations .................33
(UP-A1)
Instruction Manual Controlling iPod & Othe
Resumen del contenido incluido en la página 2
WARNING AVIS WARNING: RISK OF ELECTRIC SHOCK RISQUE DE CHOC ELECTRIQUE TO REDUCE THE RISK OF FIRE OR ELECTRIC DO NOT OPEN NE PAS OUVRIR SHOCK, DO NOT EXPOSE THIS APPARATUS TO The lightning flash with arrowhead symbol, within an RAIN OR MOISTURE. equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within CAUTION: the product’s enclosure that may be of sufficient TO REDUCE THE RISK OF ELECTRIC SHOCK, magnitude to constitute a risk of electr
Resumen del contenido incluido en la página 3
Precautions 1. Recording Copyright—Unless it’s for personal use For U.S. models only, recording copyrighted material is illegal without FCC Information for User the permission of the copyright holder. CAUTION: 2. AC Fuse—The AC fuse inside the unit is not user-ser- The user changes or modifications not expressly approved viceable. If you cannot turn on the unit, contact your by the party responsible for compliance could void the Onkyo dealer. user’s authority to operate the equipment. 3. Ca
Resumen del contenido incluido en la página 4
Speaker Precautions Package Contents Make sure you have the following items: Placement The subwoofer cabinet is made out of wood and is there- AV Receiver HT-R580 fore sensitive to extreme temperatures and humidity, do not put it in locations subject to direct sunlight or in HT-R580 (➔ 7) humid places, such as near an air conditioner, humidifier, Remote controller and two batteries (AA/R6) (➔ 5) bathroom, or kitchen. Indoor FM antenna (➔ 19) Do not put water or other liquids close to the
Resumen del contenido incluido en la página 5
Using the Remote Controller Contents Installing the Batteries Introduction Note Important Safety Instructions .........................................2 If the remote controller Precautions.......................................................................3 doesn’t work reliably, try Speaker Precautions........................................................4 replacing the batteries. Package Contents ............................................................4 Don’t mix new and old Fe
Resumen del contenido incluido en la página 6
Features AV Receiver HT-R580 *4 130 Watts/Channel @ 6 ohms “HDMI, the HDMI Logo, and High-Definition Multimedia 160 Watts/Channel @ 6 ohms (JEITA) Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.” WRAT–Wide Range Amplifier Technology *5 The HD Radio Ready logo is a proprietary trademark of iBiq- (5 Hz to 100 kHz bandwidth) uity Digital Corp. Optimum Gain Volume Circuitry To receive HD Radio broadcasts, you must install a
Resumen del contenido incluido en la página 7
Front & Rear Panels Front Panel North American models Asian models The actual front panel has various logos printed on it. They are not shown here for clarity. The page numbers in parentheses show where you can find the main explanation for each item. ON/STANDBY button (➔ 21) SETUP button (➔ 33) STANDBY indicator (➔ 21) TUNING, PRESET (➔ 24 to 25), arrow and ENTER buttons HDMI THRU indicator (➔ 40) RETURN button ZONE 2 indicator (➔ 45) MASTER VOLUME control (➔ 22) Remote control se
Resumen del contenido incluido en la página 8
Display For detailed information, see the pages in parentheses. Audio input indicators RDS indicator (excluding North American models) (➔ 25) Listening mode and format indicators (➔ 22, 28) SLEEP indicator (➔ 23) Audyssey indicators (➔ 37) MUTING indicator (➔ 23) Tuning indicators (➔ 24) Message area Rear Panel DIGITAL IN COAXIAL and OPTICAL jacks REMOTE CONTROL jack HDMI IN and OUT jacks Composite video and analog audio jacks (BD/DVD IN, VCR/DVR IN and OUT, CBL/SAT IN, C
Resumen del contenido incluido en la página 9
Speaker Package Subwoofer (SKW-580) For detailed information, see the pages in parentheses. ■ Front ■ Rear (North American models) STANDBY/ON indicator To AC outlet Red: Subwoofer in standby mode (Asian models) Blue: Subwoofer on With the Auto Standby function, the SKW-580 auto- matically turns on when an input signal is detected in Standby mode. When there’s no input signal for a while, the SKW-580 automatically enters Standby mode. OUTPUT LEVEL control (➔ 21, 22) To AC outlet This contro
Resumen del contenido incluido en la página 10
Remote Controller Controlling the AV Receiver To control the AV receiver, press RECEIVER to select Receiver mode. You can also use the remote controller to control Onkyo Blu-ray Disc/DVD player, CD player, and other components. See “Entering Remote Control Codes” for more details (➔ 51). *1 For detailed information, see the pages in parentheses. ON/STANDBY button (➔ 21) REMOTE MODE/INPUT SELECTOR buttons (➔ 22) SP LAYOUT button (➔ 23) Arrow / / / and ENTER buttons *2 SETUP
Resumen del contenido incluido en la página 11
About Home Theater Enjoying Home Theater Thanks to the AV receiver’s superb capabilities, you can enjoy surround sound with a real sense of movement in your own home—just like being in a movie theater or concert hall. With Blu-ray Discs, you can enjoy DTS and Dolby Digital. With analog or digital TV, you can enjoy Dolby Pro Logic IIx, DTS Neo:6, or Onkyo’s original DSP listening modes. Front speakers (SKF-580) These output the overall sound. Their role in a home theater is to provide a solid
Resumen del contenido incluido en la página 12
Connecting the AV Receiver Be careful not to short the positive and negative wires. Connecting Your Speakers Doing so may damage the AV receiver. Make sure the metal core of the wire does not have con- Speaker Configuration tact with the AV receiver’s rear panel. Doing so may The following table indicates the channels you should use damage the AV receiver. depending on the number of speakers that you have. For 7.1-channel surround-sound playback, you need seven speakers and a powered sub
Resumen del contenido incluido en la página 13
Connecting the Speaker Cables Screw-type speaker terminals Strip 1/2" to 5/8" (12 to 15 mm) of 1/2" to 5/8"(12 to 15 mm) insulation from the ends of the speaker cables, and twist the bare wires tightly, as shown. (Supplied speaker cables are already stripped.) Using Banana Plugs (North American models) If you are using banana plugs, tighten the speaker terminal before inserting the banana plug. Do not insert the speaker code directly into the center hole of the speaker terminal. Push-typ
Resumen del contenido incluido en la página 14
Caution Wall Mounting A mounting screw’s ability to support a speaker depends The speakers can easily be wall mounted by using the key- on how well it’s anchored to the wall. If you have hollow hole slots. To prevent the speaker from vibrating against walls, screw each mounting screw into a stud. If there are the wall, attach two of the supplied thick rubber stoppers no studs, or the walls are solid, use suitable wall anchors. to the rear of each speaker. Use screws with a head diameter
Resumen del contenido incluido en la página 15
About AV Connections Connected image with AV components HDMI cable : Video & Audio Other cables : Video : Audio AV receiver AV receiver Blu-ray Disc/ Blu-ray Disc/ DVD player Game console Game console TV, projector, etc. TV, projector, etc. DVD player Before making any AV connections, read the manuals supplied with your AV components. Don’t connect the power cord until you’ve completed and double-checked all AV connections. Right! Push plugs in all the way to make good connections (loose c
Resumen del contenido incluido en la página 16
Connecting Components with HDMI VCR or DVD recorder/Digital Video Recorder Game console TV, projector, etc. Satellite, cable, set-top box, etc. Blu-ray Disc/DVD player Connect your components to the appropriate jacks. The default input assignments are shown below. ✔: Assignment can be changed (➔ 34). Jack Signal Components Assignable Input HDMI IN 1 Audio/Video Blu-ray Disc/DVD player ✔ HDMI IN 2 VCR or DVD recorder/Digital Video Recorder ✔ HDMI IN 3 Satellite, cable, set-top box, etc. ✔ HDMI I
Resumen del contenido incluido en la página 17
Connecting External Components The on-screen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to the MONITOR OUT V or the COMPONENT VIDEO OUT, use the AV receiver’s display when changing settings. Connect your components to the appropriate jacks. The default input assignments are shown below. ✔: Assignment can be changed (➔ 34). No. Jack Signal Components Assignable COMPONENT IN 1 (BD/DVD) Component Blu-ray Disc/DVD player ✔ VIDEO video IN 2 (CBL/S
Resumen del contenido incluido en la página 18
Using the AUX INPUT jacks on the front panel Analog audio line Composite Analog audio L/R output (➔ 15) video output outputs Portable audio player Camcorder, etc. Note When you connect to both AUX INPUT AUDIO jacks and AUX INPUT LINE IN jack at the same time, AUX INPUT LINE IN jack will be given a higher priority. The AV receiver can output audio and video signals from the AUX INPUT jacks to the VCR/DVR OUT jacks. Connecting Onkyo Components Note Step 1: Make sure that each Onkyo componen
Resumen del contenido incluido en la página 19
Connecting Antenna This section explains how to connect the supplied indoor FM antenna and AM loop antenna. The AV receiver won’t pick up any radio signals without any antenna connected, so you must connect the antenna to use the tuner. North American models Asian models Insert the plug fully Insert the plug fully into the jack. into the jack. Push. Insert wire. Release. Assembling the AM loop antenna Thumbtacks, etc. Indoor FM antenna (supplied) AM loop antenna (supplied) Caution Be caref
Resumen del contenido incluido en la página 20
Which Connections Should I Use? The AV receiver supports several connection formats for compatibility with a wide range of AV equipment. The format you choose will depend on the formats supported by your components. Use the following sections as a guide. The on-screen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to the MONITOR OUT V or the COMPONENT VIDEO OUT, use the AV receiver’s display when changing settings. Note The on-screen setup menus are
