Manual de instrucciones de Grizzly 1 1/2 Ton Aluminum Jack H8096

Resumen del contenido incluido en la página 1

MODEL H8096
1
1 /2 Ton
Aluminum Jack
Specifications
Maximum Lifting Capacity .....................3000 lbs.
1
Lifting Range ..........................................3 ⁄4"–15"
Failure to follow these instructions could
Weight .......................................................27 lbs.
result in serious personal injury or death:
1. DO NOT overload this jack beyond its
rated capacity. Overloading can cause
the jack to collapse and drop the load.
2. ALWAYS support the vehicle with
appropri

Resumen del contenido incluido en la página 2

Maintenance Bleeding the Air Keep the hydraulic ram clean and free of any dust, If the jack becomes spongy or will not rise when dirt, or foreign debris. Abrasive material stuck to pumped, then air bubbles may be in the hydraulic the ram can damage the hydraulic seal when the system. These air bubbles must be bled from the ram is retracted back into the jack. Regularly wipe hydraulic fluid before the jack can be safely oper- the hydraulic ram clean with a lightly oiled rag. ated. The Model H8

Resumen del contenido incluido en la página 3

H8096 Main Parts Breakdown �� �� �� �� �� �� �� �� �� �� � �� �� � �� �� �� �� �� �� �� �� � �� �� �� �� � �� �� �� �� �� �� �� �� �� �� �� �� � � �� � �� �� �� �� � �� �� �� � �� �� �� �� �� �� � �� � � The machine label warns about hazards and ways to prevent injury. The owner of the jack MUST maintain the original location and readability of the label. If the label is removed or becomes unreadable, contact Grizzly at (800) 523-4777 or www.grizzly.com to order a new label.

Resumen del contenido incluido en la página 4

H8096 Main Parts List REF PART # DESCRIPTION REF PART # DESCRIPTION 1 PH8096001 FLANGE BOLT M10-1.5 X 25 28 PH8096028 SPECIAL SCREW M6-1 X 20 2 PH8096002 HAIR PIN COTTER PIN 29 PH8096029 FRONT WHEEL AXIS 3 PH8096003 LINKAGE SCREW 30 PH8096030 FRAME 4 PH8096004 SPECIAL RING 31 PH8096031 HANDLE BAR 5 PH8096005 SPECIAL WASHER 8MM 32 PR47M EXT RETAINING RING 13MM 6 PW01M FLAT WASHER 8MM 33 PH8096033 LONG LINKAGE 7 PLN09M LOCK NUT M12-1.75 34 PH8096034 BUSHING 8 PH8096008 BUTTON HD CAP SCR M10-1.5 X

Resumen del contenido incluido en la página 5

H8096 Hydraulic Pump Parts Breakdown ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� REF PART # DESCRIPTION REF PART # DESCRIPTION 101 PH8096101 BASE 120 PH8096120 STEEL BALL 102 PH8096102 THIMBLE 121 PH8096121 SCREW 103 PH8096103 ADJUSTABLE SPRING 122 PH8096122 O-RING 104 PH8096104 ADJUSTABLE SCREW 123 PH8096123 OIL FILL PLUG 105 PH8096105 O-RING 124 PH8096124 OIL TANK 106 PH8096106 SAFET

Resumen del contenido incluido en la página 6

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ������ ���� �������� ������ ���� ��������� � ���� ������� � ��� ���� ��������� ������� � � ������� �������� � � ������� �������� ������� ��� ����� � � ����������������������� �������� � � � � ����� ������ � ���� � ���� ����� ������ �������