Resumen del contenido incluido en la página 1
HOME CINEMA
BARCO CINE7
R9010040
R9010050
OWNERS MANUAL
26022003 R5976584/00
Resumen del contenido incluido en la página 2
Barco nv Home Cinema Noordlaan 5, B-8520 Kuurne Phone: +32 56.36.84.30 Fax: +32 56.36.88.62 E-mail: salesassistantht.bci@barco.com Visit us at the web: www.homecinema.barco.com Printed in Belgium
Resumen del contenido incluido en la página 3
Changes Barco provides this manual “as is” without warranty of any kind, either expressed or implied, including but not limited to the implied war- rantiesormerchantabilityandfitnessforaparticularpurpose. Barcomaymakeimprovementsand/orchangestotheproduct(s)and/orthe program(s) described in this publication at any time without notice. This publication could contain technical inaccuracies or typographical errors. Changes are periodically made to the information in this publication; these changes a
Resumen del contenido incluido en la página 4
Resumen del contenido incluido en la página 5
Table of contents TABLE OF CONTENTS 1. SafetyInstructions..................................................................................................5 1.1 SafetyInstructions...................................................................................................................... 5 2. ACPower.............................................................................................................9 2.1 AC Power Cord Connection ..................................................
Resumen del contenido incluido en la página 6
Table of contents 8.5 PictureTuning..........................................................................................................................52 8.5.1 StartingupPictureTuning ......................................................................................................53 8.5.2 ColorBalance ...................................................................................................................53 8.5.2.1 SelectingtheColorBalance....................................
Resumen del contenido incluido en la página 7
Table of contents 10.ProgrammableFunctionKeys ...................................................................................99 10.1ProgrammingaFunctionKeys........................................................................................................99 10.2Differentfunctionwhichcanbeprogrammed........................................................................................100 11.Messages,WarningsandFailures.....................................................................
Resumen del contenido incluido en la página 8
Table of contents 4 R5976584 BARCO CINE7 26022003
Resumen del contenido incluido en la página 9
1. Safety Instructions 1. SAFETY INSTRUCTIONS Overview Safety Instructions 1.1 Safety Instructions Notice on Safety ThisequipmentisbuiltinaccordancewiththerequirementsoftheinternationalsafetystandardsEN60950,UL1950andCSAC22.2 No.950,which are the safety standards of information technology equipmentincluding electrical business equipment. These safety standards impose important requirements on the use of safety critical components, materials and isolation, in order to protect the user or operat
Resumen del contenido incluido en la página 10
1. Safety Instructions in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. The use of shielded cables is required to comply within the limits ofPart 15 of FCC rulesand EN55022. All the safety and operating instructions should be read before using this unit. The safety and operating instructions manual should be retained for future reference. All warnings on the equipment and in the documentati
Resumen del contenido incluido en la página 11
1. Safety Instructions On Installation Do not place this equipment on an unstable cart, stand, or table. The product may fall, causing serious damage to it. Do not use this equipment near water. Slotsandopeningsinthecabinetandthebackorbottomareprovidedforventilation;toensurereliableoperationoftheproduct and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placingtheproductona bed,sofa,rug,or othersimilar surface. Thispro
Resumen del contenido incluido en la página 12
1. Safety Instructions 8 R5976584 BARCO CINE7 26022003
Resumen del contenido incluido en la página 13
2. AC Power 2. AC POWER Overview AC Power Cord Connection AC Power Voltage Switching ON/OFF 2.1 AC Power Cord Connection How to connect the AC Power Cord? Use the supplied power cord to connect your projector to the wall outlet. 1. Plug the female power connector into the male connector at the front side of the electronic block. (image 2-1) Image 2-1 Power connection 2.2 AC Power Voltage What is the AC Power Voltage? The power input voltage is autoranging between 100V (-10%) and 240V (+6%)
Resumen del contenido incluido en la página 14
2. AC Power The projector can startnow in the ’operational mode’ (image displayed) orin the ’standby mode’, dependingon the softwaresetup. Stand by indication lamp : no light up : projector in operational mode red : projector is in stand by. Leds on the front plate of the projector Image 2-2 10 R5976584 BARCO CINE7 26022003
Resumen del contenido incluido en la página 15
3. Source Connections 3. SOURCE CONNECTIONS Overview Input Locations Connecting a Composite Video source. Connecting a S-Video source. Connecting a RGB Analog source with composite sync Connecting a RGB Analog source with Tri level composite sync Connecting a Component source with composite sync Connecting a Component source with Tri level composite sync RS232 Connection Communication Port for Communication With Peripherals 12V Trigger output 3.1 Input Locations Input Facilit
Resumen del contenido incluido en la página 16
3. Source Connections 3.2 Connecting a Composite Video source. Which signal to the video input? Connect Composite video signals from a VCR, OFF air signal decoder, etc.. If a line multiplier is built in, the default position of this line multiplier soft option is ON (active). The video input signal will be displayed as a non interlaced image (= improved image stability). To enable or to disable this function, enter the adjustment mode and change the position of the ON/OFF toggle switch (see chap
Resumen del contenido incluido en la página 17
3. Source Connections 3.3 Connecting a S-Video source. Chrominance The color component of a video signal that includes information about tint and saturation. Luminance The component of a video signal that includes information about its brightness. Which signal to the S-video input? Separate Y-luma/C-chroma signals for higher quality playback of Super VHS signals. If a line multiplier is built in, the default position of this line multiplier soft option is ON (active). The video input signal will
Resumen del contenido incluido en la página 18
3. Source Connections Image 3-5 Input priority setting Dependingontheprioritysettinginthe’PictureTuningmenu’,VideoorS-Videocanbedisplayed. Ifthesettingisnotcorrect,handle as follow : 1. Press ADJUST key to start up the adjustment mode. The main menu will be displayed. (menu 3-1) 2. Select Service Menus. 3. Press ENTER to select. A warning menu, risk of incorrect adjustment, will be displayed. (menu 3-2) 4. Press ENTER to continue if you are qualified, or EXIT if not. When ENTER is pressed, the A
Resumen del contenido incluido en la página 19
3. Source Connections MAIN MENU Warning ADJUSTMENT MODE Image control Risk of incorrect adjustment Select a path from below : Choose a setup path Iris control of the projector AUTO IMAGE from below : Sound control RANDOM ACCESS SELECTED SOURCE Function keys The following INSTALLATION GENLOCKED PATTERN SERVICE menus SERVICE INTERNAL # PATTERN Service menus are reserved to, Source 01 and to be performed only Source 01 by qualified personnel ! If qualified, press to continue, or if not,
Resumen del contenido incluido en la página 20
3. Source Connections Image 3-7 3.5 Connecting a RGB Analog source with Tri level composite sync Which signal can be connected to the input? RGB analog input terminals with tri level sync input or with tri level sync on green (BNC terminals). The projector detects automati- cally where the sync signal is located. Image 3-8 RGB3S or RG3sB connection RGB3S or RG3sB selection via the RCU 1. Press digit button 4. RGB3S or RG3sB selection via the local keypad 1. Press ADJUST key to start up the adjus
