Resumen del contenido incluido en la página 1
VisualServer
VS3102
User's Manual
Resumen del contenido incluido en la página 2
Before You Use Surveillance devices may be prohibited by law in your country. Though VisualServer is not only a high performance surveillance system but also a networked video server, ensure that the operation of such devices are legal before installing this unit for surveillance. It is important to carefully check the contents with the "Package Contents" section after opening the package. Understanding the physical description can prevent damage caused by abnormal usage and
Resumen del contenido incluido en la página 3
Table of Contents Before You Use........................................................................................ 1 Package Contents...................................................................................6 Physical Description...............................................................................8 Front Panel ........................................................................................................... 8 BNC video input.....................
Resumen del contenido incluido en la página 4
Hardware installation ......................................................................................... 24 Cable connection ........................................................................................................................ 25 Power on..................................................................................................................................... 25 Software configuration..............................................................
Resumen del contenido incluido en la página 5
FTP Uploading snapshots periodically to an external FTP server ..................................................... 76 Customizing homepage images.................................................................................................. 76 Viewing system log .................................................................................................................... 77 Uploading the configuration file................................................................
Resumen del contenido incluido en la página 6
Security configuration URL ....................................................................................................... 85 Network configuration URL.......................................................................................................85 Video configuration URL ........................................................................................................... 86 Image quality configuration URL......................................................
Resumen del contenido incluido en la página 7
Package Contents VisualServer VS3102 Power adapter Camera control cable Null modem cable 6 www.vivotek.com T: 886-2-22404099 F: 886-2-22404097
Resumen del contenido incluido en la página 8
I/O terminal block connector Wrench Installation and document CD Quick installation guide Warranty card 7 www.vivotek.com T: 886-2-22404099 F: 886-2-22404097
Resumen del contenido incluido en la página 9
Physical Description Front Panel BNC video input 75Ohms resistance video port for connecting an external camera. To ensure video modulation type being correctly detected, cameras should be attached and powered on before the VisualServer is powered on. RCA audio input The audio input is connected by RCA connector of mono-audio Line-In signal. 8 www.vivotek.com T: 886-2-22404099 F: 886-2-22404097
Resumen del contenido incluido en la página 10
Rear Panel Ethernet 10/100 socket Connect to Ethernet network with a UTP category 5 cable that cannot exceed 100 meters. Once the Ethernet cable is connected without error, VisualServer will utilize Ethernet interface regardless of modem connection. COM port This RS232 serial port can connect with a modem or included null modem cable to utilize dial-up network when Ethernet is not available. If VisualServer operates with Ethernet interface, administrators may use this
Resumen del contenido incluido en la página 11
General I/O terminal block 1 DI+ INPUT (Max. 50mA, 12VDC) 2 DI- INPUT 3 SW_COMMON OUTPUT (short with NC at initial state) 4 SW_NOPEN OUTPUT (Max. 1A, 24VDC or 0.5A, 125VAC) 5 RS485 B (inverting) 6 RS485 A (non-inverting) VisualServer provides a very flexible general I/O interface to combine with the user’s security devices such as sensors, alarms, lighting or door locks. The gener
Resumen del contenido incluido en la página 12
Status LEDs Each time VisualServer starts, it will perform a Power-On Self Test, abbreviated as POST hereafter, to examine every hardware module. As soon as the administrator plugs in the power adapter, both LEDs under the network LED will flash one by one until the POST is done. If any module fails, both LEDs will indicate to the users the error according to the pattern listed in Appendix A. If the result is good, both LEDs will turn off for a while and then follows the pat
Resumen del contenido incluido en la página 13
Restore button There is a button hidden in the box for restoring the system factory default settings. When the system fails to install or operates abnormally, use the included assistant stick in the package and follow the following procedures to reset the system back to its original status. Poke the assistant stick into the hole to press down on the restore button. Restart the system by unplugging and re-plugging the power jack. While keeping the button pressed, the system w
Resumen del contenido incluido en la página 14
How to Install To easily fit into various environments, VisualServer automatically detects the attached interfaces and configures itself to the best condition. Therefore users need not care whether the connected cameras are either NTSC or PAL, how to select the network between Ethernet and modem, and whether the Ethernet speed is 10Mbps or 100 Mbps. If the connected motorized camera is on the support list, users only need to plug and play without complicated configurations.
Resumen del contenido incluido en la página 15
Ethernet Environment Hardware installation Before installing multiple VisualServers at the well-chosen locations, the administrator should memorize the serial numbers on the packages respectively for future use. Cable connection Shut down all the peripheral devices prior to connection. Connect the supplied cables from VisualServer to related devices according to the following steps. Note that the power adaptor must be kept unplugged until other cables are firmly connec
Resumen del contenido incluido en la página 16
Power on Make sure all cables are correctly and firmly connected before turning on VisualServer. Turn on cameras, sensors, alarm devices, and then attach the power adaptor of VisualServer to the electric power socket*. After the POST (power-on self test) is complete and the result is successful, VisualServer is ready for software configuration as described in this manual. At this stage, network speed and video modulation type are automatically detected. If the detection of video
Resumen del contenido incluido en la página 17
Software configuration Easy way with installer program In order to configure VisualServers remotely, administrators should keep the serial numbers of the new VisualServers for identification and initial passwords. After successfully mounting VisualServers in the proper position, run the Installer program on the appropriate PC to locate the newly installed VisualServers. VisualServers also support manual setup procedures to non-Windows based environments. The manual procedure is
Resumen del contenido incluido en la página 18
The IP address shown in "Current IP Address" field is for the administrator's reference. If the administrator wants to use another IP address, modify the IP text field below the list window. If the administrator wants to fix the IP address of the unit, check the option "Use this IP whenever system boots" to skip future installation procedures. Otherwise the unit will need installation whenever it is restarted. 17 www.vivotek.com T: 886-2-22404099 F: 886-2-2240409
Resumen del contenido incluido en la página 19
When IP and options are O.K., click on . A message window will pop open to inform if the IP address is valid. If the IP is not taken by another network device in the network, the Installer program will continue with the setup. Otherwise another message window will warn that the assigned IP conflicts. In this case, administrators should ask the network supervisor for a vacant IP address. 18 www.vivotek.com T: 886-2-22404099 F: 886-2-22404097
Resumen del contenido incluido en la página 20
After successful notification, administrators may keep the address information for user’s request. After clicking on , the "Assigned" field will be labeled "Yes". Administrators may click directly on to access the newly installed server in the default browser. 19 www.vivotek.com T: 886-2-22404099 F: 886-2-22404097
