Resumen del contenido incluido en la página 1
OPERATION AND PARTS MANUAL
MODEL V304
VIBRATORY ROLLER
Revision #8 (11/13/09)
To find the latest revision of this
publication, visit our website at:
www.multiquip.com
THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
Resumen del contenido incluido en la página 2
PROPOSITION 65 WARNING Engine exhaust and some of its constituents, and some dust created by power sanding, sawing, grinding, drillingandotherconstructionactivities contains chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Some examples of these chemicals are: Leadfromlead-basedpaints. Crystallinesilicafrombricks. Cementandothermasonryproducts. Arsenicandchromiumfromchemically treatedlumber. Your risk from these exposures varies, dependingonh
Resumen del contenido incluido en la página 3
NOTES V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) — PAGE 3
Resumen del contenido incluido en la página 4
TABLE OF CONTENTS Proposition 65 Warning ............................................. 2 Explanation Of Code In Remarks Column .............. 34 Table Of Contents ..................................................... 4 Suggested Spare Parts ........................................... 35 Parts Ordering Procedures ....................................... 5 Name Plate and Decals ..................................... 36-37 Cocoa Mat Assy. ................................................ 38-39 Travel
Resumen del contenido incluido en la página 5
PARTS ORDERING PROCEDURES Ordering parts has never been easier! Choose from three easy options: Effective: st January 1 , 2006 Best Deal! Order via Internet (Dealers Only): If you have an MQ Account, to obtain a Username Order parts on-line using Multiquip’s SmartEquip website! and Password, E-mail us at: parts@multiquip. com. View Parts Diagrams To obtain an MQ Account, contact your Order Parts District Sales Manager for more information. Print Specification Information Use the interne
Resumen del contenido incluido en la página 6
V304 — SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! HAZARD SYMBOLS Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in Lethal Exhaust Gases injury to yourself and others. Engine exhaust gases contain poisonous NOTE carbon monoxide. This gas is colorless and odorless, and can cause death if inhaled. This Owner's Manual has been developed to provi
Resumen del contenido incluido en la página 7
V304 — SAFETY MESSAGE ALERT SYMBOLS Accidental Starting Respiratory Hazard ALWAYS place the engine ON/OFF switch in the OFF position, and remove the ignition key ALWAYS wear approved respiratory when the machine is not in use. protection. Equipment Damage Messages Sight and Hearing hazard Other important messages are provided throughout this manual to help prevent damage to your trash pump, other property, or the surrounding environment. ALWAYS wear approved eye and hearing protection. NOTE Th
Resumen del contenido incluido en la página 8
RULES FOR SAFE OPERATION ■ NEVER touch the hot exhaust manifold, CAUTION: muffler or cylinder. Allow these parts to Failure to follow instructions in this manual may cool before servicing engine or pump. lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only. The following safety guidelines should always be used when operating the V304 Vibration Roller: ■ High T emperatures – Allow the engine to co
Resumen del contenido incluido en la página 9
RULES FOR SAFE OPERATION ■ NEVER Run engine without air cleaner. Severe engine ■ High Temperatures – Always stop engine and allow the damage may occur. engine to cool before adding fuel, oil or performing service and maintenance functions. Contact with hot components can ■ ALWAYS read, understand, and follow procedures in cause serious burns. Operator’s Manual before attempting to operate equipment. ■ NEVER engage the "free wheel engagement lever" when ■ ALWAYS be sure the operator is familia
Resumen del contenido incluido en la página 10
C O R E D OPERATION AND SAFETY DECALS Machine Safety Decals The V304 Compaction Roller is equipped with a number of safety decals. These decals are provided for operator safety and maintenance information. The illustration below and on the next page shows these decals as they appear on the machine. Should any of these decals become unreadable, replacements can be obtained from your dealer. P/N 511782 ESSICK A MULTIQUIP COMPANY SAFETY INSTRUCTIONS 1. Do not operate or service this machine before
Resumen del contenido incluido en la página 11
V304 — SPECIFICATIONS TABLE 1. ENGINE SPECIFICATIONS Yanmar L100AEDE/ ME odelH0 onda GX340K1QA Robin EH34OYS061 L100EEDEVMK3 (EPA Approved) Air-cooled 4 stroke, overhead Air-cooled 4 stroke, overhead Single cylinder, vertical 4-cycle air- Type valve, single cylinder, horizontal valve, single cylinder, horizontal cooled diesel shaft gasoline engine shaft gasoline engine Bore X 3.2 in. X 2.50 in. 3.31 in. X 2.40 in. 3.39 in. X 2.76 in. Stroke (88 x 64 mm) (84 x 61 mm) (86 x 70 mm) D) isplacement2)
Resumen del contenido incluido en la página 12
V304 — DIMENSIONS Figure 1. V-30-4 Roller Dimensions Side View) PAGE 12 —V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09)
Resumen del contenido incluido en la página 13
V304 — DIMENSIONS Figure 2. V304 Roller Dimensions (Front View) V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) — PAGE 13
Resumen del contenido incluido en la página 14
V304 — ROLLER COMPONENTS Figure 3. Roller Components 1 PAGE 14 —V304 VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09)
Resumen del contenido incluido en la página 15
V304 — ROLLER COMPONENTS Figure 3 shows the location of the components and basic 9. Fuel filler Port – Remove this cap to determine the components for the V304 compaction roller. The function of each amount of fuel in the fuel tank. If low, add fuel through component or control is described below: this port. 10. Engine – This roller uses three different types of 1. Multi-Position Handle Bar – This bar can be set to engines, Honda GX-340, Robin EH-34 and Yanmar L100 four different positions, par
Resumen del contenido incluido en la página 16
V304 — ROLLER COMPONENTS Figure 5. Roller Components 2 3. Travel Drive V-Belt – This belt is require to make the Figure 5 shows the location of additional components for the V304 compaction roller. The function of each component or roller travel in a forward or reverse direction. Check this control is described below: V-belt as outlined in the maintenance section of this manual. 1. Vibration Drive V-Belt – This belt is require to make 4. Compartment Hood – Remove this hood to gain the roller v
Resumen del contenido incluido en la página 17
V304 — ENGINE COMPONENTS Figure 6. Engine Controls and Components (HONDA) INITIAL SERVICING 5. Fuel Valve Lever – OPEN to let fuel flow, CLOSE to stop the flow of fuel. The engine (Figure 6) must be checked for proper lubrication and 6. Choke Lever – Used in the starting of a cold engine, or in filled with fuel prior to operation. Refer to the manufacturers Engine cold weather conditions. The choke enriches the fuel manual for instructions & details of operation and servicing. mixture. 7. Air
Resumen del contenido incluido en la página 18
V304 — GENERAL INFORMATION The V304 Vibratory Roller is a walk-behind vibratory roller SPRINKLER SYSTEM specifically designed for the compaction and patching of asphalt A 8.3 gallon (31.4 liters) water tank with a gravity feed spray bar type surfaces. is provided for wetting the roll for asphaltic pavement rolling. The compaction force is delivered by a 30-inch wide steel drum Before starting an asphalt rolling job, be sure all spray bar holes with beveled edges to help prevent asphalt marri
Resumen del contenido incluido en la página 19
V304 — GENERAL INFORMATION Tipping (Rollovers) CAUTION : NEVER! operate the roller on side slopes (Figure 9). The NEVER! stand under, or get onto the roller possibility exist that the roller could tip over (roll over), thus while it is being lifted or moved. causing bodily harm even death and serious damage to the equipment. CAUTION : ONLY! use steel ropes or chains that are capable of lifting at least 1,045 lbs (450 kg). CAUTION : NEVER! use any other part of the roller for lifting purposes. U
Resumen del contenido incluido en la página 20
V304 — INSPECTION Before Starting 1. Read safety instructions at the beginning of manual. 2. Clean the ROLLER, removing dirt and dust, particularly the engine cooling air inlet, carburetor and air cleaner. 3. Check the air filter for dirt and dust. If air filter is dirty, replace air filter with a new one as required. Figure 11. Engine Oil Dipstick (Oil Level) 4. Check carburetor for external dirt and dust. Clean with dry compressed air. 5. Check fastening nuts and bolts for tightness. NOTE S