Resumen del contenido incluido en la página 1
QSD371614C4-250 User’s
Manual
Contact US:
Q-See Products
8015 E. Crystal Dr
Anaheim, CA 92807
Website:
http://www.q-see.com
Customer Service:
Phone:877-998-3440 X 538
Email:cs@dpsi-usa.com
Tech Support:
Phone:877-998-3440 X 539
Email:ts@dpsi-usa.com
Fax:
714-998-3509
Rev 042009
Resumen del contenido incluido en la página 2
TABLE OF CONTENTS 1. INTRODUCTION .................................................................................................................2 2. DVR FEATURES .................................................................................................................2 3. PHYSICAL UNIT .................................................................................................................3 3.1 Front Panel .................................................................
Resumen del contenido incluido en la página 3
Operation Manual-4CH Duplex DVR 6.8 Exit .......................................................................................................................... 21 7. PLAYBACK WITH TIME SEARCH FUNCTION ...............................................................21 8. BACKUP via USB Flash Drive ..........................................................................................22 9. RECORDING LENGTH ..............................................................................
Resumen del contenido incluido en la página 4
Operation Manual-4CH Duplex DVR 1. INTRODUCTION The QSD371614C4-250 system provides a total 4-channel digital video security surveillance system supporting duplex (simultaneous playback and record) functionality. You can use front panel buttons, remote control unit or mouse to operate all DVR menu settings. The functionality of each access option is exactly the same. 2. DVR FEATURES ● True Duplex Functionality: Simultaneous Play/Record. ● PAL/NTSC Options. ● High Quality Color Vide
Resumen del contenido incluido en la página 5
Operation Manual-4CH Duplex DVR 3. PHYSICAL UNIT 3.1 Front Panel ● IR Remote Receiver ● LED Light (a) GREEN (PWR): The DVR unit is powered up and running. (b) RED (HDD): System is in Recording Mode or in Playback Mode. Some DVR is provided with touch-tone front panels. A series of buttons on the DVR front panel operates the system’s basic functions, such as recording, playback, fast-forward, reverse, etc. For more details about the DVR menu, refer to “6. SETUP”. The front
Resumen del contenido incluido en la página 6
Operation Manual-4CH Duplex DVR [Input: AC 100-240V, 50/60Hz, 1.5A / Output: DC +12V == 3A] ● PS/2 MOUSE PORT Use this port for PS/2 mouse connection. If you have USB port mouse, use USB - PS/2 adapter to connect with this port. ● Fan 3.3 Remote Control The buttons on the DVR remote control unit operates the system’s basic functions, such as recording, playback, fast-forward, reverse, etc. For more details about the DVR menu, refer to “6. SETUP”. ⑴ CH1↑ Use this button for f
Resumen del contenido incluido en la página 7
Operation Manual-4CH Duplex DVR ⑺ ■ (STOP) To stop playback, press the “STOP” button. ⑻ ► (PLAY) After recording, press “PLAY” button to start video playback. Playback will start with the oldest unread video data and then continue playing. ⑼ ► ► (FWD) This is the fast forward button. To play the recorded video faster, press the “FWD” button. There are three levels of fast forward playback speed. (a) FF 1 (► ► ) : Play two times faster (2x) than the normal play. (b) FF 2 (► ►► ):
Resumen del contenido incluido en la página 8
Operation Manual-4CH Duplex DVR If you are using a Mouse it must be connected to DVR before you startup system. Connect the power adapter to the DVR this will turn on the DVR. Make sure that a hard drive and camera(s) are properly installed. Start TV Monitoring and Recording. After installation of hard drive, the hard drive must be fixed tight enough with screws. If the power is turned off while recording (i.e. a power failure), the DVR will enter “Power Recovery” mode at start up, de
Resumen del contenido incluido en la página 9
Operation Manual-4CH Duplex DVR Connect “VIDEO IN” of the monitor to “VIDEO OUT” of the DVR system using the BNC to RCA cable that comes with the DVR. 5.3 Camera Connection Connect the included video cables to the “VIDEO IN” of your DVR and “VIDEO OUT” of the camera with video cable and plug in the camera’s power adapter to the power feed of the video cable near the DVR. “VIDEO OUT” on CAMERA “VIDEO IN” on DVR 5.4 Mouse Connection If you use a
Resumen del contenido incluido en la página 10
Operation Manual-4CH Duplex DVR 5.5 DVR Power Connection Connect the DVR power adapter to the adapter jack at the rear panel of the DVR unit. It will boot up the system. If users install a new hard drive, it will ask you to format the hard drive before the system starts to run (Below Fig). Choose format option by pressing the “PLAY” button. Below is the information of input/output voltage for the power adapter: Input: AC 100-240V, 50/60Hz, 1.5A Output: DC +12V == 3A 6. SETUP
Resumen del contenido incluido en la página 11
Operation Manual-4CH Duplex DVR operate live video display and image playback, or modify some parameter values that are independent of recording. If user does not have the right to modify the parameter value, there will be an identifier “ ” on top right corner of the screen. A: Mouse Control After system boot-up, hold the right mouse button and the login window will open. Hold the left mouse button to select the “Account”, and input correct account. Then left click the “Password” opt
Resumen del contenido incluido en la página 12
Operation Manual-4CH Duplex DVR Logout Channel auto sequence. The iron “ ” won’t display if the order of “auto sequence” is “OFF”. Move the mouse up or down to move the cursor. Click a left mouse button to change the settings. Click a right mouse button to go back to the previous. Hold the left mouse button to click the icon “ ”. You will see the screen below on the monitor (Fig (b)). Fig (b) B: The DVR Front Panel or Remote Control After system boot-up, Press t
Resumen del contenido incluido en la página 13
Operation Manual-4CH Duplex DVR option you can change the name of each channel if you want to. 6.2 Record Use this option to enable recording on the channel (1,2,3,4). Only selected channels will be recorded no matter how many camera channels are displayed on the screen. A: [RECORD FRAMERATE] Set the recording frame rate for each channel. The higher the recording frame rate, the more natural movement you will see while playback. You can set each chan
Resumen del contenido incluido en la página 14
Operation Manual-4CH Duplex DVR which means the system will record 48 frames per second with all channels. User can set frame rate as 3~25 frames per second with each channel. The max value of total frames per second with all channels is 50 frames. For NTSC video output format, system default value is 15 frames per second with each channel, which means the system will record 60 frames per second with all channels. User can set frame rate as 3~30 frames per second with each channel. The m
Resumen del contenido incluido en la página 15
Operation Manual-4CH Duplex DVR pressing the [QUAD] button on the DVR front panel or remote control, or using the left mouse button to click the time period 24. - Grey bar: No recording will be made for this time period unless user activates manual recording. - Red bar: The time period with a red bar will continuously record (Time record) unless you manually stop recording during that time. - Green bar: The system will record whenever motion is detected. (See the following chapter “
Resumen del contenido incluido en la página 16
Operation Manual-4CH Duplex DVR C: [MOTION DETECTION] [CHANNEL] Select the channel or channels (1,2,3,4) that you want to record when motion is detected. [SENSITIVITY] You can adjust the sensitivity of the built-in motion sensor on the DVR system. The higher the number, the higher the sensitivity is. Values are “1, 2, 3, 4, Off”. The maximum sensitivity level is 4. [MOTION AREA] Use this option to select the size of the area that you want to be sensitive to motion. Use the keypad
Resumen del contenido incluido en la página 17
Operation Manual-4CH Duplex DVR 6.4 Screen [BORDER] User can make the white borderline around each channel appear or disappear by setting this option to “on” or “off”. [AUTO SEQUENCE] This option is used to setup the channels to appear one at a time on the screen in automatic sequence, and select the time that each channel appears on the screen before switching to the next channel. Values are “Off, 1 to 10 seconds”. Default is “Off”. [VIDEO ADJUSTMENT] You can move the entire vid
Resumen del contenido incluido en la página 18
Operation Manual-4CH Duplex DVR In this menu, you can see the information of the hard drive installed in the DVR, change the system password, adjust keypad tone, access browser event list or adjust current time on the system. If user logs into the system at admin level, the menu bar will be displayed as Fig (c). The user can enter into the “account” option to examine all user accounts, and add or delete users (Please refer to section “6.6.2” for account setup). If user logs into the sy
Resumen del contenido incluido en la página 19
Operation Manual-4CH Duplex DVR password is “111111”. Type the password and press any key button. When HDD is formatting, and has successfully formatted, you will see the message below blinking. If the password is incorrect, you will see the below message blinking. Then try to enter the right password again. 6.5.2 Account Setup Only Administrator can log into the Account Setup Menu, the Account Setup allows the administrator to add new users, delete existing ones and
Resumen del contenido incluido en la página 20
Operation Manual-4CH Duplex DVR can be used as user account or password. Press 「SEL 」to input value, and move the prompt to the “Enter” option press 「SEL 」to confirm. Use CH1 for up, CH2 for down, CH3 for left, CH4 for right, Press “Shift” for change characters. [Level] Move the cursor to change the highlighted option to Level, and then press [SEL] to adjust user level (operator/guest). 6.5.3 Password Setup The default password is 111111. All numbers, letters and signs in the pa
