Resumen del contenido incluido en la página 1
Q-See Q25DVR4ES User’s Manual
Q25DVR4ES
Economy Series
User Manual
Contact Us:
Q-See Products
8015 E. Crystal Dr
Anaheim, CA 92807
Website:
http://www.q-see.com
Customer Service:
Phone: 877
Resumen del contenido incluido en la página 2
Q-See Q25DVR4ES User’s Manual Table of Contents 1. DVR Features..................................................................................................................... 3 2. Layout ................................................................................................................................ 3 2.1 Front Panel..................................................................................................................... 3 2.2 Rear Panel................
Resumen del contenido incluido en la página 3
Q-See Q25DVR4ES User’s Manual Chapter 1: DVR Features 4 Channel BNC Camera Input. 1 Channel BNC Video Output. Video Source Option: NTSC / PAL. Motion Detection with Sensitivity and Area Settings. Time Schedule Recording / Motion Triggered Recording. One ATA-100 Hard Disk Interface. USB 2.0 Back up to computer. With Remote Control & Removable Hard Drive Tray. Chapter 2: Layout - 2.1 Front Panel 1. FUNCTION KEYS 2. REMOVABLE HARD DRIVE TRAY
Resumen del contenido incluido en la página 4
Q-See Q25DVR4ES User’s Manual Chapter 2: Layout - 2.2 Rear Panel 1. 1 X BNC VIDEO OUTPUT 2. FAN 3. 4 X BNC VIDEO INPUT 4. 12V DC POWER SUPPLY 5. USB 2.0 PORT Chapter 2: Layout - 2.3 Remote Control 01. CH1 Select or enlarge CH1 02. CH2 Select or enlarge CH2 03. CH3 Select or enlarge CH3 04. CH4 Select or enlarge CH4 05. QUAD Quad View Rewind 06. 07. Play recording list Forward 08. Record 09. Pause 10. 11. Stop recording 13. ME
Resumen del contenido incluido en la página 5
Q-See Q25DVR4ES User’s Manual Chapter 3: Installation - 3.1 Installing Hard Drive NOTE: This package comes with a 250GB hard drive. You would follow these instructions if you want or need to install a new hard drive. 1. Slide the HDD tray out of DVR body carefully. 2. Connect the power cord and data cable to hard disk drive carefully. 3. Insert the HDD tray into DVR body. 4. Lock the HDD tray. Make sure the HDD is set as MASTER. CAUTION: Do not remove the cartridge whi
Resumen del contenido incluido en la página 6
Q-See Q25DVR4ES User’s Manual Chapter 3: Installation - 3.2 Connecting Cameras and TV Monitor There are 4 camera inputs and 1 video output with BNC connectors (Refer to Chapter 2: Layout- 2.2 Rear Panel). 1. Connect the camera cables from the camera to the 4 Video Inputs on the DVR. 2. Connect the 4 power feeds for the cameras to the power connectors on the cable near the video ports of the DVR, connect the other end to the power supply and plug the power supply into a surge protect
Resumen del contenido incluido en la página 7
Q-See Q25DVR4ES User’s Manual Chapter 4: System Boot - 4.2 Recovering Lost Data RECOVER HDD? 04811-101735 The system will automatically recover (SELECT)YES/(MENU)NO lost data. A Power Error can cause data to be lost. Chapter 4: System Boot - 4.3 Restore Recording Feature Power Error Detected Restore Hard Disk (Master) OK Restore REC Mode………… OK If a Power Error occurs during recording process, the system will automatically resume recordi
Resumen del contenido incluido en la página 8
Q-See Q25DVR4ES User’s Manual Chapter 5: DVR Setup - 5.1 Setup Menu MAIN MENU > CAMERA SELECT 1 2 3 4 Press [ Menu] to enter the setup ＞ ＞ REC ＞ ＞ORD SELECT 1 2 3 4 RESOLUTION EACH menu; RECORD FRAME 25 RECORD QUALITY HIGH SCHEDULE SET Use [ Up] and [ Down] to MISCELLANEOUS MENU HARD DISK SET select item; MOTION SET FACTORY RESET Press [ Select] to modify settings a
Resumen del contenido incluido en la página 9
Q-See Q25DVR4ES User’s Manual Chapter 5: DVR Setup - 5.2 Camera Select The DVR system can display 4 camera feeds in one picture (Quad Mode). Users can configure which camera is displayed. Press [ Select] to modify setting and press [ CH1], [ CH2], [ CH3],[ CH4] to set each channel separately. If the channel is disabled, the system will display “OFF” on the monitor. Chapter 5: DVR Setup - 5.3 Record Select Configure which channels are allowed to re
Resumen del contenido incluido en la página 10
Q-See Q25DVR4ES User’s Manual [QUAD] button and hold for three (3) seconds to make each video channel enlarge to full screen. The full screen will be displayed for three (3) seconds, including Quad view. The Loop Function will continue until any button is pushed. For example, [Stop] will stop the Loop function and may stop the recording depending on Record Schedule Settings. 2. Quad Mode: The DVR will compress and record all 4 video channels into one file, therefore user
Resumen del contenido incluido en la página 11
Q-See Q25DVR4ES User’s Manual Chapter 5: DVR Setup - 5.7 Schedule Set User can setup video recording method by Time, Motion Triggered and Continuous Recording. SCHEDULE SET “-” No Recording. TTTAAATTTTTTAATTTT - - T -- -- - - AAT “T” Continuous (System Default). │ │ │ │ │ │ │ │ │ “A” Motion Triggered. 0 3 6 9 12 15 18 21 24 [ ] Up / [ ]Down: To move the prompt. [ ] Select: To select Method. PRESS (U ， P ，， ， DOWN), ENTER (SELECT)
Resumen del contenido incluido en la página 12
Q-See Q25DVR4ES User’s Manual Chapter 5: DVR Setup - 5.10 Sub Menu-Password Change System default password: Press [ CH1] button six times. User needs to enter six characters for the password. All keys can be used as password key except the [ Menu] key, CURRENT PASSWORD : - - - - - - which is used to exit. NEW PASSWORD : - - - - - - Note: To Reset the DVR. CONFIRM PASSWORD : - - - - - - Press the [Pause] button 10 times. Resetting the DVR restores all
Resumen del contenido incluido en la página 13
Q-See Q25DVR4ES User’s Manual Chapter 5: DVR Setup - 5.12 Sub Menu-Time Set TIME SET To configure the DVR’s time: ∨∨ ∨∨ 2008/08/08 20:08:08 Press [ Up] and [ Down] to move prompt. PRESS (UP,DOWN), ENTER (SELECT) Press [ Select] to modify. PRESS (MENU) TO EXIT Press [ Menu] to save and exit. Chapter 5: DVR Setup - 5.13 Hard Disk Setup OVERWRITE ENABLED: HARD DISK SETUP If you choose YES, recording continues and OVERWRITE ENAB
Resumen del contenido incluido en la página 14
Q-See Q25DVR4ES User’s Manual Chapter 5: DVR Setup - 5.14 Motion Setup MOTION RECORD TIME: This number indicates how long the MOTION SET triggered recording lasts after the DVR MOTION RECORD TIME: 10 MOTION ALARM TIME: OFF has been triggered by motion. MOTION ALARM TIME: MOTION SET This number indicates how long the buzzer inside the DVR will sound when a motion event has been detected. PRESS (UP, DOWN), ENTER (SELECT) MOTION SET
Resumen del contenido incluido en la página 15
Q-See Q25DVR4ES User’s Manual Chapter 5: DVR Setup - 5.15 NTSC/PAL Output Selection Change the J10 jumper on the system board to select NTSC or PAL video output as marked on the silkscreen of the system board. NTSC/PAL Select Chapter 5: DVR Setup - 5.16 Factory Reset Press the [ SEL] Button to reload factory defaults, then the DVR will reboot, all custom settings (including password) will be restored to default. There is no confirming dialog box for this
Resumen del contenido incluido en la página 16
Q-See Q25DVR4ES User’s Manual Chapter 6: Recording - 6.1 Start Recording Press [ Record] to start recording (As set in 5.7 Schedule Set). System will display information on Screen. NOTE: Only EACH Mode can enlarge single channel to full screen display. 1 10% 3 R R 2 R R 4 6 8 5 7 QUAD REC [M] (T) 2008/07/01 16:22:30 1. Hard Drive Usage (Displayed as a percentage) 2. Recording Symbol (channel is currently recording) 3. Channel Name 4. Mode (QUAD or EACH) 5. Status
Resumen del contenido incluido en la página 17
Q-See Q25DVR4ES User’s Manual Chapter 6: Recording - 6.3 Recording Time on Hard Drive Estimated record time based on a 120GB Hard Drive (Quad Mode) Unit: Hour System Quality Frame Rate 25 12 6 1 HIGH 20 70 146 291 1748 PAL NORMAL 15 93 194 388 2330 LOW 12 117 243 485 2913 System Quality Frame Rate 30 15 7 1 HIGH 20 58 117 251 1748 NTSC NORMAL 15 78 155 332 2330 LOW 12 97 194 416 2913 Estimated record time based on a 120GB Hard Drive (Quad Mode) in hours: 120 (G Byte) x 1
Resumen del contenido incluido en la página 18
Q-See Q25DVR4ES User’s Manual SEARCH TIME 1 2 2008/01/08 08:30:56 ┅ ┅ ┅ ┅ 2008/01/08 16:00:35 01 TIME 2008/01/08 15:50:20 3 2008/01/08 14:30:56 02 TIME * ＞＞ ＞＞ 03 TIME 2 008/01/08 14:15:30 4 04 TIME 2008/01/08 14:00:15 * 2008/01/08 13:55:37 05 MOTION * 5 06 MOTION 2008/01/08 11:30:12 2008/01/08 10:15:30 07 MOTION 4 08 MOTION 2 008/01/08 08:30:55 (UP,DOWN) MOVE (PLAY) PLA
Resumen del contenido incluido en la página 19
Q-See Q25DVR4ES User’s Manual Chapter 8: USB DVR Access - 8.2 Program buttons Page 19
Resumen del contenido incluido en la página 20
Q-See Q25DVR4ES User’s Manual 1. DVR Event List 2. Capture one frame picture 3. Save DVR’s Recorded Video to PC 4. Configuration 5. Load Video File Saved in PC 6. Play DVR Video File 7. Play PC Video File 8. Channel Selection Keys 9. Playing Scroll Bar 10. Fast backward 11. Previous Frame 12. Play Backward 13. Pause 14. Play 15. Next Frame 16. Fast Forward 17. Volume Scroll Bar (not used by this unit) 18. Exit Press to open the event video list. Page 20
