Manual de instrucciones de Pelco HKHS3024

Resumen del contenido incluido en la página 1

®
HKHS3000/HKHS3024
Heater Kits
Installation/Operation
Manual C499M
1.0 SCOPE 2.1 RECOMMENDED CABLE DISTANCES
The information contained within this manual covers The following are the recommended cable distances for
the HKHS3000 and HKHS3024 heater kits. heater operation when used with a transformer capable
of delivering the power requirements. Cable distances
Installation should be in accordance with all applicable are based on a 10% line loss.
local and national electric codes, utilizing app

Resumen del contenido incluido en la página 2

3.0 INSTALLATION To install the HKHS3000 and HKHS3024, perform the following steps. 1. Remove the cover from the enclosure. 2. Attach the PC board/bracket assembly to the rear plate using two (2) 1/4-20 nuts and lock washers, attaching to the studs on the end plate (see Figures 1 and 3). 3. Install the heater pads onto the front of the body (end nearest window) by removing the backing and pressing in place onto the floor of enclosure (see Figure 3). 4. Wire per the wiring diagram in Figure 2.

Resumen del contenido incluido en la página 3

4.0 EXPLODED ASSEMBLY DIAGRAM Figure 3. HKHS3000/HKHS3024 Exploded Assembly Diagram 5.0 MECHANICAL PARTS LIST The following parts list corresponds to the items identified in Figure 3 above. Item Number Quantity Description Part Number 1 2 Heater blanket, 120 VAC, 15 watts (HKHS3000) HK300010115 Heater blanket, 24 VAC, 15 watts (HKHS3024) HK300010024 2. 1 Bracket, PCB HSK30004000COMP 3 1 PCB assembly, term/thermostat PCB9000300ASSY A 2 Nut, hex 1/40-20 XX ZH1/4-20NUTCH B 2 Washer, #5610-22-60,

Resumen del contenido incluido en la página 4

6.0 WARRANTY AND RETURN INFORMATION If there is a dispute regarding the warranty of a product WARRANTY which does not fall under the warranty conditions stated above, please include a written explanation with Pelco will repair or replace, without charge, any the product when returned. merchandise proved defective in material or workmanship for a period of one (1) year after the date Ship freight prepaid to: Pelco of shipment. Exceptions to this warranty are as noted 300 West Pontiac Way below