Manual de instrucciones de Pelco DEMOKIT-P

Resumen del contenido incluido en la página 1

C2452M-C (7/03)
DEMOKIT-F/DEMOKIT-P
Spectra III/Spectra III SE Demo Kit
®
24 VAC (ORANGE)
24 VAC (GREEN)
Rx- (RED)
Rx+ (BLACK)
ALARM 1 (WHITE)
JUMPER WIRE
(BROWN)
AUX 2 (VIOLET)
GROUND (BROWN)
VIDEO
N/O AND N/C
FOR ALARM
FUSE COVER
NOTE: Extra fuses are sup-
plied with the equipment. To
change the fuse, use a small
screwdriver and remove the
TIGHTEN SET SCREWS
TO SECURE ASSEMBLY fuse cover.
AUX 1 OUTPUT
POWER OUT TO MONITOR
ON/OFF SWITCH
KEYBOARD
ALARM OUT POWER IN
MONITOR
VIDEO COM
IMPORTANT:

Resumen del contenido incluido en la página 2

WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or (559) 292-1981 to workmanship for a period of one year after the date of shipment. Exceptions to this warranty are obtain a Repair Authorization number (RA), and provide the following information: as noted below: 1. Model and serial number • Five years on Pelco manufactured camer