Resumen del contenido incluido en la página 1
XR20
Users Guide
Resumen del contenido incluido en la página 2
Silencing an Alarm All/Perimeter and Home/Away Systems While the alarm bell or siren is sounding, enter your user code. The keypad displays DISARM SILENCE. Press the Select key under SILENCE to stop the bell or siren. This does NOT disarm the system. Area Systems While the alarm bell or siren is sounding, enter your user code. The system silences the alarm bell or siren. What to do when a trouble tone is sounding You can silence the trouble tone by pressing any one of the top row Select keys.
Resumen del contenido incluido en la página 3
® Security Command User's Guide TM XR20 Command Processor Panels Table of Contents Section Page Section Page About Your Security System ........................................ 1 Extended Schedules ................................................. 21 The Security Command Keypad ................................... 2 Date and Time......................................................... 21 Special Security Command Messages ........................... 3 Display Events ..............................
Resumen del contenido incluido en la página 4
Emergency Evacuation Plans First Floor Second Floor The National Fire Protection Association recommends that you establish an emergency evacuation plan to safeguard lives in the event of a fire or other emergency. Use the following steps as a guide. Fire Escape Draw a floorplan of your home or business On a clean sheet of paper, draw the walls, windows, doors, and Window Ladder stairs. Also draw any obstacles that a person may encounter while exiting the building such as large furniture or appli
Resumen del contenido incluido en la página 5
Introduction About Your Security System Your Security Command system has been designed with your safety A Note About False Alarms and comfort in mind. It uses the latest in computer technology to One of the most important concerns facing the security industry create the most user friendly security and fire system on the market today is false alarms. The accidental dispatching of police and fire today. agencies places others in jeopardy by limiting the response capability of those emergency ser
Resumen del contenido incluido en la página 6
Data Entry keys The Security Command Keypad These keys allow you to enter your user code when arming or Your system may have one or more easy-to-use Security Command disarming, and enter other information into the system. keypads (16- or 32-character) that allow you to properly operate the Back Arrow key system. The illustration and descriptions below highlight some of the keypad features. The Back Arrow key is used to go back through the keypad displays while operating your system. You can pr
Resumen del contenido incluido en la página 7
Special Security Command Messages Special Security Command Tones As you use your system, you will occasionally see a keypad display Your keypad also contains a small speaker that allows it to alert you that asks you to enter a user code or describes a condition on the to events as they occur on your system. Below are brief descriptions system. Below are some examples of the displays you will see. of the different tones you will hear from the keypad: Fire alert: Your keypad may sound a fire ton
Resumen del contenido incluido en la página 8
Entry or Exit Zone Understanding Security System Terms Almost all systems have one or more doors through which you can Throughout this guide, and in some displays on your keypad, you will enter or exit the premises. These doors are programmed with a see certain words or phrases that might be unfamiliar. Although delay time to allow you to enter or exit while the system is armed every effort has been made to use terms that are commonly known, without setting off the alarm. there are some for wh
Resumen del contenido incluido en la página 9
Central Station Monitoring Status List Your system can also be programmed to automatically send alarm, The keypad Status List displays any alarm or trouble condition on a trouble, and arming and disarming reports to a central station. zone and any trouble condition that occurs with the AC power or Operators at the central station can then dispatch the appropriate battery power. If your system contains any Panic zones, these are authorities or contact you with the specific event information. not
Resumen del contenido incluido en la página 10
If the problem can be corrected by closing a door or window, do not How your System Operates bypass the zone. Instead, correct the problem and try arming again. Your system has been programmed to operate in one of three If the problem cannot be corrected, you can bypass the zone or wait modes: Area Arming, All/Perimeter, or Home/Sleep/Away. until the zone can be repaired by a service technician. A bypassed Area Arming - Your burglary protection is divided into up to four zone is ignored by t
Resumen del contenido incluido en la página 11
Note: You can also just press the area numbers you want to arm Area System Arming while at the ALL? NO YES display. This changes the display to Area Assignment: Your security system has been programmed into AREAS:. The numbers you select appear in the display. For separate areas. The number of areas and their names are listed in example: AREAS: 2 4. Press COMMAND when done. the back of this guide. 6. The system displays any zones that have been bypassed prior to Arming or Disarming: Yo
Resumen del contenido incluido en la página 12
Disarming an Area System Area System Disarming Disarming: While the system is armed, you can only enter the 1. Press the COMMAND key until ARM DISARM is displayed. During premises through an exit/entry delay door without causing an entry delay this process starts at step 3 below. alarm. After opening the door, the Security Command keypad 2. Select DISARM to disarm areas. sounds a prewarn tone to remind you to disarm the system. You must disarm the system before the delay time expires or an
Resumen del contenido incluido en la página 13
Arming an All/Perimeter System All/Perimeter System Arming Area Assignment: Your security system is divided into two separate 1. Enter your code. The keypad displays PERIM ALL. areas. Motion detectors, inside doors, and other interior protection 2. Select PERIM to arm the Perimeter area only. devices are assigned to the Interior area while windows and exterior 3. Select ALL to arm both the Perimeter and Interior areas. doors are assigned to the Perimeter area. 4. The keypad displays any
Resumen del contenido incluido en la página 14
Disarming During an Alarm All/Perimeter System Disarming Disarming: While the system is armed, you can only enter the 1. While the alarm bell or siren is sounding, enter your user code. premises through an entry/exit delay door without causing an The keypad displays DISARM SILENCE. alarm. After opening the door, the Security Command keypad 2. Press the Select key under DISARM to disarm the system and sounds a prewarn tone to remind you to disarm the system. You must silence the alarm. disar
Resumen del contenido incluido en la página 15
5. The keypad displays zones that have been bypassed prior to Home/Away System Arming arming and 24-hour zones that are in a bad condition. No action Area Assignment: Your security system is divided into two or three is required by you. separate areas. Motion detectors, inside doors, and other interior 6. At this point you can force arm or bypass any bad zones. A zone devices are assigned to an Interior and possibly Bedroom area while windows and exterior doors, are assigned to a Perimeter ar
Resumen del contenido incluido en la página 16
Disarming a Home/Away System Home/Away System Disarming Disarming: While the system is armed, you can only enter the 1. During the entry delay, the keypad displays ENTER CODE:. Enter your user code. premises through an entry/exit delay door without causing an alarm. After opening the door, the keypad sounds a prewarn tone 2. The keypad then displays any alarms or communication problems to remind you to disarm the system. You must disarm the system that occurred during the armed period. before
Resumen del contenido incluido en la página 17
User Menu BYPASS ZONES Allows you to Bypass a zone or reset an Security Command User Menu already bypassed zone. Many of the features of your system have been put into a User Menu you can access from any Security Command keypad. The menu ZONE MONITOR Allows you to add or remove a zone requires you to enter your user code and then only shows those from the monitor mode. functions to which you have access. SYSTEM TEST Tests the system's siren, communication To access the User Menu: to the central
Resumen del contenido incluido en la página 18
User Check-in Zone Activity Check User Code Level: Master or Standard User Code Level: Master or Standard Function: This feature allows you to monitor the arrival of children Your security system may be programmed for the Zone Activity from school or employees to work by having a special Check-in Check feature to monitor a person for non-activity. This could be Report sent to your alphanumeric or numeric pager. Your system used for a person living alone to detect when they have not tripped mus
Resumen del contenido incluido en la página 19
Sensor Reset Outputs On Off User Code Level: Master or Standard User Code Level: Master or Standard. Function: Resets smoke or glassbreak detectors. Also clears Fire Function: Allows you to turn the system's outputs on and off. and Supervisory zone alarms and trouble keypad displays. Sensor This function is used to individually turn your systems relay outputs Reset also clears low battery displays if your system is using wireless on and off. Your system may use these outputs to control inte
Resumen del contenido incluido en la página 20
Bypass Zones Zone Monitor User Code Level: Master or Standard. User Code Level: Master and Standard. Function: Allows you to bypass a zone prior to arming the system. Function: Allows the system to monitor selected disarmed zones (doors, windows, or motion detectors). When a monitored zone is Bypassing is usually done when a zone cannot be restored to normal tripped, the keypad sounds a tone and displays the zone name. This and you want to arm the system. Once bypassed, the system will is a
