Manual de instrucciones de Honeywell XG1000

Resumen del contenido incluido en la página 1

MyRemoteManager
HONEYWELL BRIDGE
INSTALLATION PROCEDURE ///
[
HONEYWELL VISTA SERIES 15P & 20P AND SAFEWATCH 3000 ADDRESSABLE PANELS ONLY
]
PROFESSIONAL INSTALLATION OF THE BRIDGE TO THE ALARM PANEL IS RECOMMENDED

Resumen del contenido incluido en la página 2

LINK LAN ACT REM STAT DEV ACT INSTALLATION CHECKLIST /// HONEYWELL BRIDGE INSTALLATION PROCEDURE /// ■ XG1000 Controller and a Honeywell Bridge 1. Connect the Honeywell Bridge to the Honeywell Panel (or the keypad if possible) ■ 6160 Alpha panel as a debugging tool The Bridge connects just like an additional keypad (SafeWatch Pro 3000 terminals noted). ■ Confirm address 22 is open and configured as a keypad device. Please power down the Honeywell Panel prior to beginning this process: Plea

Resumen del contenido incluido en la página 3

COMPLETING THE INSTALLATION /// 5. Log into your remote account via a PC browser. Click on the Account Settings tab on the interface and then select the Discovery sub-tab, to access the Discovery page. 1. Access your remote account via a PC browser and log in using your account UserID and Password. NOTE: If your XG1000 Controller is not registered to your account you must register it prior to proceeding. 2. Click on the Device Overview tab to access the Device List for the system. Onc

Resumen del contenido incluido en la página 4

LINK LAN ACT REM STAT DEV ACT 4. In the User Code field on the pop-up, the customer will enter a User Access Code for the RANGE TEST alarm system. Please note that this step is not required for manual operations. Perform this test if the LED indicator on the Honeywell Bridge continuously This will enable the customer to set up Rules through the Security Wizard in their web account shows solid RED and does not change to GREEN. (Until the customer completes this step, the XG1000 Controller wi