Resumen del contenido incluido en la página 1
ARMED
READY
OFF
1
2 3
ESCAPE RECORD VOLUME
PLAY
AWAY
4
5 6
ADD LIGHTS ON
TEST BYPASS
STAY
7 8 9
DELETE LIGHTS OFF CODE
CHIME
AUX
0
#
SELECT STATUS NO DELAY FUNCTION
K5481V3 4/04 Rev. A
Resumen del contenido incluido en la página 2
SYSTEM OVERVIEW................................................................................................................................3 Features.................................................................................................................................................3 General Operation.................................................................................................................................5 Quick View of System Func
Resumen del contenido incluido en la página 3
This system offers you three forms of protection: burglary, fire, and emergency, depending on the configuration of your system. The system consists of a master keypad for controlling system operation, various wireless sensors that provide perimeter and interior burglary protection, and optional smoke or combustion detectors to provide early fire warning. In addition, optional wireless keypads may have been installed to allow you to control the
Resumen del contenido incluido en la página 4
• AUX key function: Designated key lets you activate a predefined series of keystrokes with a single press of the $8; key plus user code, or manually send a pager message. It will also allow you to manually send a voice message to phone number that has been programmed by your installer. Ask your installer which of these features has been assigned to the $8; key in your LYNXR/LYNXR24. Refer to the AUX FUNCTION section for detailed information. • Scheduling featur
Resumen del contenido incluido en la página 5
Your system's sensing devices have been assigned to various "zones." For example, the sensing device on your entry/exit door may have been assigned to zone 01, sensing devices on windows in the master bedroom to zone 02, and so on. These numbers appear on the display when an alarm or trouble condition occurs. /<1;5 /<1;5 LV QRW LQWHQGHG IRU 8/ +RXVHKROG )LUH DSSOLFDWLRQV XQOHVV D KRXU EDFNXS EDWWHU\ 3 1 /<1;5&+.,7 +& LV LQVWDOOHG
Resumen del contenido incluido en la página 6
NOTE: = Boxes represent the entering of your 4-digit user code. SECURITY FUNCTIONS Checking system status: -------------- 67$786 To arm in STAY mode: ---------------- 67$< To restart exit delay: ------------------- 67$< RQO\ LI SURJUDPPHG DQG V\VWHP DUPHG LQ 6WD\ PRGH To arm in AWAY mode: --------------- $:$< To arm with NO DELAY: ------------- $:$< RU 67$< 12 ’(/$< To arm if Quick Arm is active: ----- $:$< RU 67$<
Resumen del contenido incluido en la página 7
To remotely deactivate X-10 devices 7 & 8: > @ > @ GHYLFH QR To remotely bypass a zone: ---------- > @ ]RQH QR To remotely activate forced bypass: ------------ > @ > @ > @ To remotely check system status: To hang up: ---------------------------------- > @ ,I IRUFHG E\SDVV ZDV HQDEOHG E\ \RXU LQVWDOOHU OTHER FUNCTIONS To set the time and date: ------------- )81&7,21 > @ To set scheduling: ------------------------ )81&7,21 > @ T
Resumen del contenido incluido en la página 8
IMPORTANT: If the keypad beeps rapidly upon entering the premises, an alarm has occurred during your absence and an intruder may still be on the premises. LEAVE IMMEDIATELY and CONTACT THE POLICE from a nearby safe location. The keypad allows you to control all system functions. The keypad features telephone-style keys and a Liquid Crystal Display (LCD), which shows the nature and location of all occurrences. ARMED READY OFF 12 3 ES
Resumen del contenido incluido en la página 9
21 1 2 3 20 4 19 5 ARMED READY 6 OFF 12 3 ESCAPE RECORD VOLUME PLAY 18 7 AWA Y 45 6 ADD LIGHTS ON TEST BYPASS STAY 78 9 DELETE LIGHTS OFF CODE CHIME 8 17 AUX 0 # * SELECT STATUS NO DELAY FUNCTION 9 16 15 14 13 12 11 10 01009-022-V1 IMPORTANT! When you use the keypad to enter codes and commands, press the keys within 2 seconds of one another. If 2 seconds elapse without a key depression, the entry is aborted and must be repeated from its beg
Resumen del contenido incluido en la página 10
5. 7(67 KEY: Tests the system and alarm 15. 67$< / ’(/(7( KEY: Arms the perimeter sounder. burglary protection, guarding protected doors, windows and other perimeter protection points, and 6. %<3$66 KEY: Removes individual protection sounds an alarm if one is opened. Interior protection zones from being monitored by the system. is not armed, which allows movement within your Displays currently bypassed zones. house without causing an alarm.
Resumen del contenido incluido en la página 11
LOW BAT AC AWAY INSTANT CHIME TEST IRU RWKHU GLVSOD\V VHH 7URXEOH 0HVVDJHV REC MESSAGE STAY ALARM FIRE BYPASS FAULT ALARM: Appears when the system is armed and an intrusion has been detected (also appears during a fire alarm or audible emergency alarm). Accompanied by the protection zone that is in alarm. AWAY: All burglary zones, interior and perimeter, are armed. INSTANT: Entry delay is turned off. S
Resumen del contenido incluido en la página 12
Before arming your system, all protected doors, windows, and other protection zones must be closed or bypassed (see the BYPASSING PROTECTION section). Pressing the 67$786 key will announce all zones that are faulted, as well as any other abnormal system condition, making it easier for you to secure any open zones. READY LIGHT: The green READY indicator on the keypad will be lit if the system is ready to be armed. If bli
Resumen del contenido incluido en la página 13
Use this mode when you are staying home, but expect someone to use the entrance door later. Close all protected perimeter windows and doors before arming. The green READY indicator on the keypad should be lit if the system is ready to be armed. RU SUHVV DQG KROG To arm in STAY mode: 67$< 67$<
Resumen del contenido incluido en la página 14
% & Use NO DELAY with STAY mode when you are staying home and do not expect anyone to use the entrance door. Use NO DELAY with AWAY mode when the premises will be vacant for extended periods of time such as vacations, etc. When armed with NO DELAY, the system will sound an alarm if a protected door or window is opened, including the entrance door. You may leave through the entrance door during the exit delay period
Resumen del contenido incluido en la página 15
) Exit delay begins immediately after arming the system, and gives you time to leave through the designated exit door without setting off an alarm. A slow beeping will sound throughout the exit delay period, if programmed. Exit Alarms Exit Alarm Active To minimize false alarms sent to the alarm monitoring company, your system may have been programmed for this feature. Ask your installer if Exit Alarm is active for your system.
Resumen del contenido incluido en la página 16
Use the 2)) key to disarm the system and to silence alarm and trouble sounds. See the SUMMARY OF AUDIBLE NOTIFICATION section for information, which will help you to distinguish between fire and burglary alarm sounds. IMPORTANT: If you return and the main burglary sounder is on, DO NOT enter the premises, but call the police from a nearby safe location. If you return after an alarm has occurred and the main sounder has shut itself off, the keyp
Resumen del contenido incluido en la página 17
! "
* Use the BYPASS key when you want to arm your system with one or more zones intentionally unprotected. Bypassed zones are unprotected and will not cause an alarm when violated while your system is armed. All bypasses are removed when an OFF sequence (security code plus OFF) is performed. Bypasses are also removed if the arming procedure that follows the bypass command is not successful. The system will not allow
Resumen del contenido incluido en la página 18
!
# Your system may have been programmed to use special keys to manually activate panic functions. The functions that might be programmed are listed below. See your installer for the function(s) that may have been programmed for your system. Active Panic Functions Keys Zone Function Your installer should note the functions that 1 and ✻ 95 are active in your 3 and # 96 system. ✻ and # 99 To use a paired key panic function, si
Resumen del contenido incluido en la página 19
! # If the Paging feature has been programmed for your system, your pager will respond to certain conditions as they occur in your system by displaying a message that indicates the type of condition that has occurred. The message appears in a 7-digit format explained below. The system can also be programmed to send up to 16 additional digits that will appear in front of the 7-digit message. These 16 digits may consist of a PIN number or special d
Resumen del contenido incluido en la página 20
$#% & # +$ ,- If the “Follow Me” Announcement feature has been programmed your system will automatically dial a telephone number and deliver a voice message. The two different types of “Follow Me” messages include system and reminder announcements. System Announcements LYNXR/LYNXR24 can be programmed to trigger “Follow Me” system announcements by one or a combination of the following events: • Alarm • Tr
