Resumen del contenido incluido en la página 1
Galaxy
3-48C, 3-144, 3-144C, 3-520, 3-520C
User Guide
Honeywell Security
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
Table of Contents Introduction ...................................................................................... vii Compliance and Approvals ............................................................. vii KEYPAD INFORMATION..................................................................... 1 General ................................................................................................................ 1 Number Keys (0 – 9).......................................................
Resumen del contenido incluido en la página 4
Fault and Tamper Conditions ............................................................ 7 Resetting Fault and Tamper Conditions ........................................... 7 Overriding Fault and Tamper Conditions when Setting .................. 7 MENU OPTIONS ................................................................................. 8 Full Menu ............................................................................................................. 8 Quick Menu ......................
Resumen del contenido incluido en la página 5
Zones ........................................................................................................................... 14 Log ............................................................................................................................... 14 All .................................................................................................................................. 14 Help Message .................................................................................
Resumen del contenido incluido en la página 6
ALARM AND HELP MESSAGES ...................................................... 34 Alarm In Progress ........................................................................................................34 Pa Reset Required ...................................................................................................... 34 Manager Reset Required ............................................................................................ 34 Engineer Reset Required ..........................
Resumen del contenido incluido en la página 7
INTRODUCTION The Galaxy 3 Series alarm system is a microprocessor controlled system which has been designed using the latest software and hardware technology. First and foremost, the Galaxy 3 Series meets all your security needs. The engineer will program and commission the system to your own exacting requirements. Warning: There are no user serviceable parts inside. Please refer all servicing to a qualified installer. Compliance and Approvals Public Switched Telephone Network (PSTN) approval Th
Resumen del contenido incluido en la página 8
Resumen del contenido incluido en la página 9
KEYPAD INFORMATION General The Galaxy Alarm system is controlled by Galaxy Mk7 Full Alpha Liquid Crystal Display (LCD) keypads. A maximum of 8 keypads can be connected to the Galaxy 3-48 control panel, 16 keypads to the Galaxy 3-144 control panel and 32 keypads to the Galaxy 3-520 control panel. GALAXY 520 V5.00 LCD Display 08:58 TUE 22 NOV Number Keys A 1 2 3 View keys B 4 5 6 Enter Key 9 ent 7 8 Star Key esc Escape Key 0 # * Hash Key Power LED Number Keys (0 – 9) These keys are used to en
Resumen del contenido incluido en la página 10
Enter Key (ent) The ent key accepts and processes entered data. Valid actions are performed and the next option is accessed. Escape Key (esc) The esc key aborts the current option to return to the previous option level. Any option modification made prior to the option being aborted is erased. Successive pressing of the esc key returns the user to the start display (known as the BANNER). The esc key also aborts the setting routine if pressed during the exit time. Hash Key (#) The # key is used t
Resumen del contenido incluido en la página 11
SETTING THE SYSTEM Before Setting Code + A Before setting the system ensure all doors and windows are secured Code + ent and areas protected by movement detectors are free from obstruction. TIMED SET 120 Entering A Pin - User Type 2.1 - 2.2 As each digit is entered the keypad responds with a bleep and displays a *. When all the digits are entered, press the ent or A > key to start the setting routine. Entering A Pin - User Type 2.3 - 3.6 As each digit is entered the keypad responds with a bleep
Resumen del contenido incluido en la página 12
Sounder During the setting period the sounder emits a continuous tone if all of the zones are closed. If a zone is opened during the setting period, the sounder begins to pulse. The sounder also pulses during the last 25% of the setting time to indicate time running short. Zones Open The exit time will reset should any zones be open or opened during 3 zones open setting. The display will indicate the number of zones open and invite [<] [>] to view viewing. Closing the zones will restart th
Resumen del contenido incluido en la página 13
MAX SETTING OPTIONS Setting with User Cards/Tags/Fobs MAX user cards/tags/fobs can be used to set the system. This is done by assigning a MAX user card (tag or fob) with one of the setting options. When the MAX card is held against a MAX module for five seconds, the MAX function is activated. For example, if the MAX function assigned is 13 = Part Set, then activating the card held function results in the system being part set. If a user is assigned group choice, then a keypad will have to be acc
Resumen del contenido incluido en la página 14
UNSETTING THE SYSTEM Normal Entry Unsetting starts immediately when the FINAL door is opened or an PIN + ent ENTRY zone is activated. The sounder pulses slowly and the user must go directly to the keypad and enter a valid PIN, followed by A>,
Resumen del contenido incluido en la página 15
Fault and Tamper Conditions When a fault or tamper condition occurs in the unset state, an alert condition is activated. This consists of an intermittent beep at the keypad and/or a visual alert on the keypad. A user should enter their code at the keypad and press ent. The condition causing the fault or tamper will be shown. Use the A>and
Resumen del contenido incluido en la página 16
MENU OPTIONS The Galaxy 3 Series provides various menu options for modifying the functional perform- ance of the system. There are two menu structures: Full Menu Only accessed by authorised users including the master manager code and by the engineer. Quick Menu A selection of options from the full menu. The quick menu is the default menu access for all user codes (type 2.3 and above) except the master manager and engineer. Full Menu UserType Quick Menu T4 ype 2.3T5 ype 2.T6 ype 2. Type 3. 0 =Omi
Resumen del contenido incluido en la página 17
Accessing The Menu To access the menu enter a valid code and press the ent key. If there are any outstanding system faults, these will be displayed first. Where there is more than one fault a > symbol will be displayed and the scroll keys can be used to view them. Pressing the ent key again takes the display into the menu. The Full Menu or Quick Menu is accessed, depending on the user type. Note: 1. If the user does not have group choice, all groups assigned to the user code must be unset
Resumen del contenido incluido en la página 18
Omit Zones (User Type 2.3 and Above) Purpose This option allows the user to omit zones before setting the system. Zones must be eligible for omission otherwise they will not be displayed. PIN + ent Note: Zones remain omitted for one set period only. 0 = OMIT ZONES [ent] to select Selecting Omit Zones Enter the QUICK MENU. The 0=OMIT ZONES option is displayed. ent Press the ent key to select this option. 1003 A1 INTRUDER Viewing Eligible Zones #=OMIT ENT=SET When the Omit Zones option is selected
Resumen del contenido incluido en la página 19
ATM PIN + ent Atm 1/2/3/4 Zones ATM zones are omitted by entering one of the ten ATM codes (last 10 [ent] to Select users). To select this option enter an ATM code followed by the ent 1=ATM-1 key. Use the A> key to scroll through the four ATM zone options >A (ATM1 to ATM4) and select by pressing the ent key. A preprogrammed ATM delay time will expire before omitting all ATM zones with the [ent] to Select 2=ATM-2 selected ATM zone type. The zones will be omitted for the duration of the ATM time-o
Resumen del contenido incluido en la página 20
Chime (User Type 2.3 and Above) Purpose PIN + ent The Chime mode is switched on and off by this option. When the Chime mode is on, any zones that have been programmed by the 0 = OMIT ZONES [ent] to Select engineer for chime will activate momentarily when opened. Note: Your system may not require any zones of this type. 2 Selecting Chime 2 = CHIME Enter the QUICK MENU. Press key 2 followed by the ent key. The [ent] to Select display shows the ON/OFF status of the Chime mode. Press the >A key to
