Resumen del contenido incluido en la página 1
OPERATING GUIDE for your
GEM-RP8 KEYPAD
I
1 2 3 4 5 6 7 8
H
E
A 1 2 3
J
F
B 4 5 6
G
C 7 8 9 0
COMPUTERIZED SECURITY SYSTEM
OI219E 7/03
© NAPCO 2003 DESIGN PATS. PENDING
STATUS
ARMED
Resumen del contenido incluido en la página 2
INTRODUCTION Congratulations on your purchase of an advanced GEMINI-RP8 keypad. Meticulously developed by a leading manufacturer of state-of-the-art security products, this system will provide you with unprecedented peace-of-mind & incorporates some of the most sophisticated features available today. Above all, it has been designed an extra step, to provide all those operating it with very easy, intuitive use. Please carefully review the information contained in this manual, so that you
Resumen del contenido incluido en la página 3
TABLE OF CONTENTS TABLE OF CONTENTS System Information KEYPAD CONTROLS & INDICATORS ..................................................4 Central Station Phone Number: ___________________ ARMING: SETTING THE ALARM WHEN LEAVING .............................5 ARMING: PROTECTING YOURSELF AT HOME .................................6 Central Station Account Number: _________________ EMERGENCY CONDITIONS ..................................................................7 TURNING OFF THE
Resumen del contenido incluido en la página 4
KEYPAD CONTROLS & INDICATORS Fire Alarm Light I will flash and the Keypad Zone Lights (1 through 8) will light to indicate AC Light will light to indicate that the corresponding Zone is open, and will that AC Power is present. sounder will beep when system is in a Fire Alarm flash to indicate a zone in alarm. Condition (See Silencing a fire Alarm, Page 8) Press E Trouble Light H will light and the Keypad to bypass all sounder will pulse to indicate that a system GEMINI interior troub
Resumen del contenido incluido en la página 5
ARMING: SETTING THE ALARM WHEN LEAVING Arming Your System When Leaving 1 Before arming your system, make sure the green Status light is ON. This indicates that all of your protective zones are secure. If any zones are open, the corresponding Zone number will be lit. Secure these zones before proceeding. If any zones cannot be secured, see Bypassing zones below. 2 Enter your user code and press D. The green Status light will go out, the red Armed light will light. • If you make a mist
Resumen del contenido incluido en la página 6
ARMING: PROTECTING YOURSELF AT HOME Protecting Yourself While at Home 1 Before arming your system, make sure the green Status light is ON. This indicates that all of your protective zones are secure. If any zones are open, the corresponding zone number will be lit. Secure those zones before proceeding. 2 Enter your User Code and press D. The green Status light will go out, and the red Armed light will light. 3 Before your exit delay expires, press B to bypass any interior zones,
Resumen del contenido incluido en la página 7
EMERGENCY CONDITIONS Emergency Buttons 7 8 9 G 7+G Fire Emergency The three sets of emergency buttons, if programmed, are always active whether the system is armed Enabled? or disarmed. Discuss these Buttons with your installer. The emergency signal will only be activated when the two respective buttons are pressed at the same time. Yes ! No ! Fire Alarm: Simultaneously press7+G to sound a fire alarm, and to alert the central 8+G station of a fire emergency
Resumen del contenido incluido en la página 8
TURNING OFF THE ALARM (DISARMING) WHEN RETURNING Disarming Your System when Returning 1 Enter your premises through the Entry/Exit door. The keypad will sound a steady tone to remind you to disarm the system before your Entry Delay time expires. 2 Enter your User Code and press D. The red Armed light will go out, indicating that the system has been disarmed. Note: If you make a mistake entering your code, press C and re-enter the code, followed by D. Alarm Indication
Resumen del contenido incluido en la página 9
FIRE PROTECTION Preparing a Fire Escape Plan Even with the most advanced fire alarm system, adequate protection requires an escape plan. To prepare your plan, draw floor plans of your building (space is provided on the next page). Show two exits-a front or back door and a window from each room. (Make sure each window works. You may need a special fire-escape ladder if the window is high up). Write down your outside meeting place. Family Rehearsal Would You Like More Safety
Resumen del contenido incluido en la página 10
FIRE PROTECTION Floorplan Draw a plan of your premises below. 10
Resumen del contenido incluido en la página 11
FUNCTION MENU By pressing followed by the the appropriate key, (do not press simultaneously) these special functions and A features can be enabled: Easy Arm (when system is disarmed) The Easy Arm feature allows the system to be armed by Display System Trouble pressing A followed by 0. This will allow the easy Pressing A followed by4 when TROUBLE H is lit arming of the system by someone who is not a regular will cause the system to display any current system troubles. system user.
Resumen del contenido incluido en la página 12
H SYSTEM TROUBLES The Control Panel is constantly monitoring its own components, as well as all critical services, such as AC power and the telephone line, to insure that it is always ready to provide the protection for which it was designed. When a system trouble does occur, it will caution you by lighting the TROUBLE H light and beeping the keypad buzzer. If you cannot immediately clear the system trouble, the system can still be used. Simply press A followed by 4 to view the trouble as
Resumen del contenido incluido en la página 13
H SYSTEM TROUBLES Keypad Beeps or Zone light System Trouble Action ON Condition H Flashes 2 Beeps 2 Fire Trouble A problem has been detected in the Fire Circuit. Call installing company for service. 2 Beeps 3 Wireless Receiver A problem has been detected with the wireless receiver. Trouble Call installing company for service. 2 Beeps 4 Wireless Receiver Jam A problem has been detected with a wireless receiver. Call installing company for service. 3 Beeps 1-8 Wireless Transmitt
Resumen del contenido incluido en la página 14
PROGRAMMING (OPTIONAL) Your Installer has assigned a User 1 Code which can be used to not only Arm and Disarm the system, but also to enter the User Program Mode, where you can program other user codes. The following explains how you will use this code to program or erase additional user codes. Entering the User Program Mode Press A followed by 8 and enter the User 1 code folowed by D. The Armed, Status and H lights will flash, and the keypad will beep 4 times. You are now in t
Resumen del contenido incluido en la página 15
GLOSSARY Ambush Code - In the event that you the zone number to bypass a zone. Keypad Sounder - A local warning are forced by an intruder to disarm your device at the keypad to alert that Entry Monitors alarm, Central Station - system, this special code can be used delay has started. emergency and trouble reports from the to disarm the system, and alarm system and notifies proper System Trouble - A problem has been simultaneously send a silent alarm to detected in the system which
Resumen del contenido incluido en la página 16
NAPCO LIMITED WARRANTY NAPCO SECURITY SYSTEMS, INC. (NAPCO) warrants its products to be free from manufacturing defects neither assumes, nor authorizes any other person purporting to act on its behalf to modify, to change, or to in materials and workmanship for thirty-six months following the date of manufacture. NAPCO will, within assume for it, any other warranty or liability concerning its products. said period, at its option, repair or replace any product failing to operate correctly wi
