Resumen del contenido incluido en la página 1
466-2061 Rev C
June 2004
Part Number:
60-960-95
!
Resumen del contenido incluido en la página 2
Notices FCC Part 15 Information to the User Changes or modifications not expressly approved by GE Security can void the user’s authority to operate the equipment. FCC Part 15 Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy
Resumen del contenido incluido en la página 3
Contents About This Manual 1 Special Installation Requirements .............................................................................................................. 1 UL Listed Installations............................................................................................................................ 1 SIA System Requirements...................................................................................................................... 2 Central Station Reporting ....
Resumen del contenido incluido en la página 4
SuperBus 2000 8Z Input Module (60-774)........................................................................................... 18 SuperBus 2000 4-Relay Output Module (60-770)................................................................................ 18 SuperBus 2000 Cellular Backup Module ................................................................................................. 18 SuperBus 2000 Automation Module (60-783-02)..........................................................
Resumen del contenido incluido en la página 5
Changing Fixed Display LCD Touchpad Chime and Trouble Beep Tones ............................................. 67 Adjusting Touchpad Display Contrast ..................................................................................................... 67 Testing Audio Verification Module (AVM) Communication .................................................................. 67 Testing Cellular Backup Communication ...................................................................................
Resumen del contenido incluido en la página 6
About This This manual provides information for planning, installing, programming, and testing this security system. When necessary, this manual refers you to other documentation included with compati- Manual ble peripherals. Planning sheets are included for you to record hardware layout and software programming set- tings. About the User’s Guide The User’s Guide (466-2060) contains user worksheets that should be filled out during the instal- lation and programming of the system. With two parti
Resumen del contenido incluido en la página 7
Immediate Beeps set to on UL 98 Options set to on Receiver Failure set to on (if wireless devices are used) Siren Verify set to on RF TX Timeout set to 4 hours (if system includes a built in or SuperBus 2000 RF Receiver and wireless smoke sensors) Sleep Time set to off Siren Timeout set to 4 minutes or more Two Trip Error set to off Disable Trouble Beeps set to off UL 1023 & 985 24-Hour Backup For 24-hour backup, the total current draw for all connected devices is limited to 1
Resumen del contenido incluido en la página 8
Function Operation Cancel Alarm Enter Code Only (or 1 + CODE) Abort Annunciation Enabled Cancel Report Annunciation Enabled UL 1635 Digital Alarm Communicator System Note Same as UL 1023 & 985 plus: For UL 1635 installations, AC Failure set to on Entry Delay plus Dialer Abort Delay must not Comm Failure set to on exceed 60 seconds. RF Tx Timeout set to 4 hours Low CPU Battery set to on Phone Number must be programmed Next Phone Test set to 1 Phone Test Freq. set to 1 High Lev
Resumen del contenido incluido en la página 9
Up to 96 wireless or hardwired zones Standard Panel The following describe the basic panel (out-of-box) hardware capabilities. Power: Input for an AC step-down, plug-in style transformer. Auxiliary Power Output: Output that supplies 8.5 to 13.5 VDC with up 1.35 amps (with panel powered by 50 VA transformer) for bus devices and hardwired detectors, such as smoke and motion detectors. Bus A and B: Input and output that provides communication between bus devices and the panel. Siren Dr
Resumen del contenido incluido en la página 10
4 Output SnapCard: Provides four form C relay outputs that can be set up to activate other signalling devices, based on system events, schedules, or direct control. 4Z Input/2 Output Combo SnapCard: Provides three hardwire zone inputs, one two wire smoke detector loop, and two outputs that can be set up to activate other signalling devices, based on system events, schedules, or direct control. SuperBus 2000 8Z Input Module (HIM) Provides eight additional hardwire zone inputs. SuperBus 200
Resumen del contenido incluido en la página 11
Note Determine the Panel Location (A) Class 2, Class 3, and Before permanently mounting the panel, determine panel location using the following guidelines: power-limited fire alarm cir- cuits must be installed using Centrally locate the panel with relation to detection devices whenever possible, to help FPL, FPLR, FPLP, or substi- reduce wire run lengths and labor. tute cable permitted by the National Electrical Code Locate the panel where the temperature will not exceed 120°F (49°C) o
Resumen del contenido incluido en la página 12
Table 1: Maximum Device Wire Length and Current Draw (Continued) Max. Wire Length Max. mA Device to Panel Draw 8Z Hardwire Zone Expander SnapCard N/A 230 mA* 4 Output SnapCard N/A 130 mA* 22 ga.—1,800 ft. SuperBus 2000 8Z Input Module 35 mA 18 ga.—4,000 ft. 22 ga.—350 ft. SuperBus 2000 4-Relay Output Module 180 mA 18 ga.—900 ft. 22 ga.—1,600 ft. SuperBus 2000 Energy Saver Module 20 mA 18 ga.—4,000 ft. Standard Power: 22 ga.—15 ft. 1600 mA 18 ga.—40 ft. SuperBus 2000 Cellular Backup Module Hig
Resumen del contenido incluido en la página 13
Table 3: Minimum Device Current Draw Device Min. mA Draw SuperBus 2000 Automation Module 30 mA SuperBus 2000 Transceiver Module 50 mA SuperBus 2000 Wireless Gateway Module 55 mA Interrogator 200 10 mA Interrogator AVM 45 mA After determining panel location, run all necessary wires to that location using the guidelines in Table 4. Table 4: Wire Requirements Device Wire Requirements AC Power Transformer 2-conductor, 18-gauge, 25 feet max Earth Ground Single conductor, 16-gauge solid, 25 feet max
Resumen del contenido incluido en la página 14
/ 0 , , , , , , , , Mounting Hole SuperBus 2000 Transceiver Panel Circuit Board (under Transceiver) Knockout Knockout Phone Interface/ Voice Module Mounting Holes Figure 2. Mounting the Panel Identify Panel Before installing devices and making wiring connections, familiarize yourself with the main panel components. Figure 3 shows the three main panel components: the circuit board, trans- Components ceiver and phone interface/voice module. Transceiver Panel Circuit Board Snapcard / 0
Resumen del contenido incluido en la página 15
Connect To Inside Terminals / 0 , , , , , , , , Transceiver Figure 4. Installing the Antennas Note Connecting the Panel to Earth Ground For best results, it is recom- For maximum protection from lightning strikes and transients, connect the lower-left circuit mended that you crimp a spade lug on the wire end at board screw to earth ground as shown in Figure 5. Use 16-gauge, solid copper wire from an earth the panel and secure the lug grounded cold water pipe clamp to the panel. under
Resumen del contenido incluido en la página 16
Note Connecting Detection Devices to Panel Zone Inputs The panel comes with fac- Zone inputs 1 through 8 are supervised using included 2k-ohm, end-of-line resistors at the last tory programmed onboard hardwire zones. Install device on each circuit. All eight zones accept either normally open (N/O) or normally closed (N/ 2k-ohm, end of line (EOL) C) detection devices. resistors on all unused fac- tory programmed onboard Connecting Intrusion Detection Devices hardwire zones. If you don’t wan
Resumen del contenido incluido en la página 17
Note The Two-Wire Smoke set- 2-Wire 4-Wire ting (in program mode) must +12V be off when using 4-wire Zone 4 6 + 2 7 2W SMK 8 5 2 8 9 smoke detectors. See Panel Panel ONBOARD OPTIONS—INPUTS Terminals 222 2 223 * Terminals in the section “Programming the Panel” for complete details. Model 449AT . 6 Model . 6 449AT 2k Ohm EOL Resistor 49-454 (Locate at Last Detector) 2k Ohm EOL Resistor 49-454 (
Resumen del contenido incluido en la página 18
Hardwire Interior Speaker (60-528) For interior siren applications. Connect the speaker to the panel as shown in Figure 9. Connect only the large speaker to the panel terminals 7 and 8 as shown. The smaller speaker cannot handle to output of terminals 7 and 8. To avoid damaging the speaker, ! the smaller speaker should not be connected to terminals 7 and 8. Caution Connect two units to the panel terminals with speakers in series (16-ohms), as shown in Figure 10. Exterior Interior Speaker Spea
Resumen del contenido incluido en la página 19
(01710) activates the output for status and alarm tones, allowing for a piezo siren connection without changing the output configuration number. It is typically used for interior siren applica- tion. For more information on output configuration numbers, see “Onboard Options Menu”. Note Exterior Sirens Piezo siren connections to terminal 10 require a 2k Hardwire Exterior Siren (13-046) resistor that can be located at the panel, since it does Note not supervise the circuit. If This siren i
Resumen del contenido incluido en la página 20
Note For unsupervised wireless siren installations: Regardless of supervised or 1. Power up the panel (see “Powering Up the Panel”). unsupervised siren installa- 2. Enter program mode and set the partition House Code to the desired setting (see the LIGHT tion, you must follow the order of installation as CONTROL menu in the section “Programming the Panel”). described to avoid learning 3. Exit program mode. the wrong (or undesired) 4. Install the siren backup battery. House Code and SWS
