Manual de instrucciones de Chamberlain PIRV400R

Resumen del contenido incluido en la página 1

®
Models PIRV400R
Wireless Pedestrian & Vehicle Sensor with Voice
AOSV
Wireless Office Alert Add-On Sensor
Overview
The PIR Motion Sensor only works with
Chamberlain's Wireless Pedestrian & Vehicle Alert
with Voice (Model RWV400R) and Office Alert
To prevent possible SERIOUS INJURY or DEATH from
(Model CWV1000). The PIR Motion Sensor can be
electrocution, outputs are suitable ONLY for controlling low
used to monitor motion up to 30' away and can voltage devices, 24V max, ac or dc.
tr

Resumen del contenido incluido en la página 2

PIR Motion Sensor Assembly & Programming PIR Motion Test Sensor to Base Station Step 6 Step 1 A Ensure that Base Connect the PIR A Station and PIR Motion Sensor box to Motion Sensor are in mounting plate with close proximity to silver screw. Tighten each other. Press and screw until PIR release learn button Motion Sensor stays on Base Station. in place when Buzzer will sound. repositioned. Step 2 A B A Install 4 AA Alkaline batteries B (not provided). (Lithium batteries recom

Resumen del contenido incluido en la página 3

Advanced Features Troubleshooting Both the PIR Motion Sensor and Base Station have The Alert does not function. relays which can activate other electrical devices. The Check batteries in PIR Motion Sensor. Ensure Base accessory device will need a separate power supply. Station has power. Ensure PIR Motion Sensor is NOTE: Output switching capacity is low voltage (24V programmed to Base Station. max, ac or dc). The Alert is not getting expected transmission Base Station: The relays can be

Resumen del contenido incluido en la página 4

FOR TECHNICAL SUPPORT DIAL OUR TOLL FREE NUMBER: 1-800-528-9131 www.chamberlain-DIY.com NOTICE: To comply with FCC and or Industry Canada rules (IC), adjustment or modifications of this receiver and/or transmitter are prohibited, except for changing the code setting or replacing the battery. THERE ARE NO OTHER USER SERVICEABLE PARTS. Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the following two conditions: (1) this device may not cause harmful interfer