Manual de instrucciones de Audio Authority 1166

Resumen del contenido incluido en la página 1

Resumen del contenido incluido en la página 2

Installation and Operation Manual HD Home Theater Routing System Model 1166 High Definition DVI/Component Video AutoSelector™ Model 1156 High Definition Component Video AutoSelector™ Audio Authority and the Double-A Symbol are registered trademarks of Audio Authority Corp. AutoSelect is a trademark of Audio Authority. Copyright February, 2007, all rights reserved. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ® Aud

Resumen del contenido incluido en la página 3

Resumen del contenido incluido en la página 4

Resumen del contenido incluido en la página 5

Resumen del contenido incluido en la página 6

Resumen del contenido incluido en la página 7

Audio Authority AVAtrix, 1156 and 1166 User Manual  INPUT SELECTION SOFT KEY MENU KEY Press a key to switch the Performs the task indicated Switches between Resi- NAVIGATION AND ENTER KNOB corresponding input to the on the display (usually dential and Professional POWER LED IR WINDOW DISPLAY Turn knob to navigate on-screen menus, main output; these keys scroll or AUTO on/off) Modes, or touch while When lit, Receives infrared Press to dim the display press knob to enter (press and hol

Resumen del contenido incluido en la página 8

Resumen del contenido incluido en la página 9

Resumen del contenido incluido en la página 10

Resumen del contenido incluido en la página 11

Resumen del contenido incluido en la página 12

Resumen del contenido incluido en la página 13

Resumen del contenido incluido en la página 14

Resumen del contenido incluido en la página 15

Resumen del contenido incluido en la página 16

Residential Operation The Model 1166 or 1156 allows you to select which of up to six video/audio sources to play through your home theater system. In addition, if you have an AVAtrix, the source being displayed at each Wallplate can be controlled by the Model 1156/66 and, if the Wallplate location is equipped with an infrared receiver, the source can be selected using an infrared remote control in the room where the Wallplate is located. You may wish to use Professional mode if your system i

Resumen del contenido incluido en la página 17

Professional Operation The Professional mode is designed to allow easy control of 1176 (AVAtrix) remote Wallplate outputs from the Model 1166 or 1156. If your system does not include an 1176, use the Residential Mode. Switch between Residential and Professional by touching the front panel Professional mode in Unit view. Press soft key to change views. Menu key or by pressing the Zero key on the remote. The Professional screen displays the source currently assigned to each Wallplate or zone

Resumen del contenido incluido en la página 18

1166 Source Input and Main Output Connections Up to six sources may be connected to the Model 1166 or 1156 AutoSelector (1166 shown below). An HDMI source requires a model 1312 HDMI to DVI adapter. All available connections should be made, with the exception of digital audio; only one of the two digital audio connections should be made for each source. (See page 11 for instructions.) DVI SOURCE COMPONENT VIDEO SOURCE COMPONENT VIDEO SOURCE DVI SOURCE HDMI SOURCE Model 1312 HDMI to DVI+Digital Au

Resumen del contenido incluido en la página 19

and other 1176 Matrix Router Configurations Multiple Wallplates may be connected to a Model 1166 with Model 1176 Matrix Routers. A single 1176 has a capacity of six Wallplates. IR signals sent over Cat 5 through the 1176 are then sent through the 1166 and retransmitted on the IR ouput jack. IR signals from the 1105 (or other enabled remotes) are interpreted by the 1176 and affect only the output of the Wallplate originating the IR. If the system has multiple sources sharing

Resumen del contenido incluido en la página 20

1170 MultiDriver Expander Connections Multiple Wallplates may be connected to a Model 1166 with Model 1170 MultiDrivers. A single 1170 has a capacity of six Wallplates. IR signals sent over Cat 5 and through to the 1170 are then sent through the 1166 and retransmitted on the IR ouput jack. 1105 IR signals from Wallplates connected through the 1170 do not control switching. SOURCE 1 SOURCE 2 SOURCE 3 SOURCE 4 SOURCE 5 SOURCE 6 MAIN OUTPUT To IR distribution system 1166 or 1156 1170 1170 18V Po