Resumen del contenido incluido en la página 1
USER GUIDE
VXI BlueParrott B150
VXI BlueParrott TalkPro B150-GTX
Wireless Bluetooth Headset & Charger
Resumen del contenido incluido en la página 2
VXI. Connecting people to a digital world. 2
Resumen del contenido incluido en la página 3
Table of Contents Basic Safety Instructions.......................................................................4 Product Features .................................................................................5 Glossary of Terms ...............................................................................6 Operation Summary .............................................................................6 Compatibility Information ..............................................................
Resumen del contenido incluido en la página 4
BASIC SAFETY INSTRUCTIONS CAUTION Do not use headset while placed in charger. Danger of explosion if battery incorrectly replaced. Replace only with the same or equivalent battery type as recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. Do not dispose of batteries in fire, as they could explode. Do not immerse the BlueParrott headset or charger in water. Plastic bags and small parts may cause choking if ingested. Keep them away from childre
Resumen del contenido incluido en la página 5
PRODUCT FEATURES Adjustable headband T-bar Multi-function button with indicator lights Noise canceling microphone* Volume (increase)/Mute control *The B150-GTX has a more sensitive Volume (decrease) microphone for superior accuracy with speech recognition applications. Headset charging contact Power cord port AC power cord Mobile power cord 5
Resumen del contenido incluido en la página 6
GLOSSARY OF TERMS Standby Mode – Headset is on, but not in Talk Time mode. The yellow indicator light will flash slowly, every 4-5 seconds. Standby Mode is automatic after remov- ing headset from the charger. Standby time is up to 100 hours on a full charge. Talk Time Mode – Talk Time Mode refers to the time that the headset is on and utilizing Talk Time. The yellow indicator light will flash rapidly, about once every second. Talk TIme is approximately 6 hours on a full charge. Pair / Pairing –
Resumen del contenido incluido en la página 7
MAXIMIZING RANGE The range of communication distance between the BlueParrott B150 headset and another Bluetooth device is typically the same as the Bluetooth standard of 33 feet. However, certain Bluetooth devices may have other enhancements to provide longer range. Please consult your Bluetooth device’s user manual or contact the Bluetooth device manufacturer for more information. Certain environmental conditions can inhibit radio wave transmission and reduce transmission range, such as metal s
Resumen del contenido incluido en la página 8
CHARGING THE HEADSET Before first time operation, place the headset securely in the charger and allow the unit to charge undisturbed for 4 full hours. To charge the headset using an electrical outlet select the AC power cord. To charge the headset using your vehicle’s auxiliary power outlet select the mobile power cord (see page 5 for power cord photos). Indicator light Power cord port 1. First, plug the power cord into the charger’s power cord port (see photo above). Then plug the AC power co
Resumen del contenido incluido en la página 9
4. Charge headset 4 hours before first use. After this, each additional hour of charge time will yield approximately 2.5 hours of talk time (Up to 6 hour Talk Time total). When the headset is fully charged the indicator light on the headset will turn green. After use, this light will turn red when it is placed back in the charger, indicating less than a full charge. It is not necessary to wait for the light to turn green before using the headset. Remove headset from charger when you wish to stop
Resumen del contenido incluido en la página 10
HEADSET ADJUSTMENTS / MICROPHONE POSITIONING See Page 5 for product features Headset Adjustment 1. Place the headset on your head with the ear cushion on your left or right ear. 2. Swivel microphone boom up and over, if necessary, to bring it to the chosen side. 3. Place T-bar on the side of your head above your ear. 4. Slide headband in or out for a secure fit. Microphone Positioning Microphone positioning is important to ensure proper microphone performance. 1. The microphone has the word T
Resumen del contenido incluido en la página 11
BASIC OPERATIONS See page 5 for location of button controls and indicator lights. Standby Mode / Talk Time The headset is automatically in Standby Mode when you remove it from the charger, therefore, a single press of the multifunction button will put the headset into Talk Time mode. You will hear a single beep when you press the multifunction button. When the headset is in Standby Mode the yellow indicator light on the headset will flash slowly, every 4-5 seconds. If the yellow light is not fl
Resumen del contenido incluido en la página 12
PAIRING See page 5 for location of button controls and indicator lights. Note: You must pair the B150 headset with your other Bluetooth device before first use. Before Pairing: Turn The Headset Off If the yellow light on the headset is flashing (you may need to wait 5 seconds to see it), then you must turn the headset off before pairing, as follows: Press and hold down the multifunction button on the headset for about 3 seconds. You will hear 3 beeps in the headset that descend in tone (hold i
Resumen del contenido incluido en la página 13
You will hear two series of melodic tones (hold it up to your ear). Release the mul- tifunction button. The yellow and red indicator lights on the headset will flash alternately . 4. Refer to your other Bluetooth device’s user manual for instructions on how to pair the other Bluetooth device to the headset. The device’s passcode must be set to 0000. 5. When the red indicator light on the B150 headset stops flashing, pairing has been completed (consult your other Bluetooth device’s user ma
Resumen del contenido incluido en la página 14
HEADSET VOLUME AND MUTE CONTROLS See page 5 for location of button controls. Adjust Speaker Volume To adjust the volume in your earpiece, press the increase or decrease volume button for 1 second, then release. Repeat until volume is at desired level. You will hear a sin- gle beep each time you press the button. You may also be able to adjust speaker vol- ume on your other Bluetooth device (such as a cell phone). Check owner’s manual for more information. Mute The Microphone On The Headset To mu
Resumen del contenido incluido en la página 15
3. Activate your phone. You may need to select the Bluetooth headset menu option (consult your phone’s user manual). There may be a delay of a few seconds while the headset and the handset discover each other. Dial as usual. 4. To end the call, press the End/Off button on your cellular phone. To put the head- set back into Standby Mode press the multifunction button on the headset for 1 sec- ond. You will hear a beep and the headset will revert to Standby Mode. Answer A Call / End A Call Before
Resumen del contenido incluido en la página 16
1. Access the appropriate menu on your phone to activate the connection to the headset. 2. Firmly press the multifunction button on the headset for 1 second, then release. 3. Resume your conversation using the headset. USING THE B150 HEADSET WITH OTHER BLUETOOTH DEVICES Before use, make sure the headset is on (page 11). 1. Put the headset on and position the microphone properly. 2. If the headset is in Standby Mode (see page 11), put the headset in Talk Time mode by pressing the multifunction bu
Resumen del contenido incluido en la página 17
VISUAL AND AUDIO INDICATORS EXPLAINED Headset Indicator Lights / While In Charger: Multifunction button not lit Headset not receiving charge Green light Fully charged/Okay to use Red light Partially charged/okay to use. No light Headset not receiving charge Headset Indicator Lights / While Off Charger: Yellow flashing slowly, every 4-5 seconds In Standby mode Yellow flashing faster,every second In Talk Time mode No lights Headset off Red/yellow lights flash alternately, then red stops Pairing su
Resumen del contenido incluido en la página 18
FAQS / TROUBLESHOOTING Why don't I hear a dial tone? 1. Make sure the headset is turned on (page11). 2. Were the units paired together before first use (page 12)? 3. Be sure the headset connection has been activated on the other Bluetooth device.* How long do I have to charge the headset before I can use it? You should charge the headset for 4 consecutive hours before first use. After that, the headset will continue to charge any time it is mounted in the charger. Why do people (or the compute
Resumen del contenido incluido en la página 19
Why do I have the sensation of hearing my own voice too loudly in my ear? (This is called “excessive sidetone”) 1. First, check and establish acceptable volume settings on the phone’s handset. 2. Move the microphone slightly away from your mouth. 3. Reduce the speaker volume level on the headset (page 14) 4. If your Bluetooth device has a microphone volume adjustment, reduce the volume level. My battery seemed to last less time than expected. How do I remedy this? If this happens, condition the
Resumen del contenido incluido en la página 20
USA FCC Part 15 FCC Notice to Users/Product Statements This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Users are not permitted to make changes or modify the device in any way. Changes or modifications not approved by VXI Corporation will void the user’s authority to opera
