Resumen del contenido incluido en la página 1
INSTALLATION & OPERATION GUIDE
MODELS
RS6
GRANITE
RS6
SANDSTONE
RS6
CORAL
Weatherproof Rock Loudspeaker
®
BLENDING HIGH FIDELITY
®
AND ARCHITECTURE
Resumen del contenido incluido en la página 2
CONGRATULATIONS Thank you for choosing a Rock Loudspeaker from Niles. With proper installation and operation, you’ll enjoy years of trouble free use. Niles’ manufacturers the industry’s most complete line of custom installation components and accessories for audio/video systems. For a free full line catalog write to: Niles, Catalog Request, P.O. Box 160818, Miami, Fl 33116-0818 or check our website at www.nilesaudio.com. TABLE OF CONTENTS INTRODUCTION 2 FEATURES & BENEFITS 3 INSTALLATION CONSIDE
Resumen del contenido incluido en la página 3
INTRODUCTION INTRODUCTION The RS6 series of weatherproof rock loudspeakers are designed to provide unparalleled listening satisfaction and GeoRealistic™ styling. The extraordinary sonic performance of the RS6 was achieved by harmonizing Niles' unique and proprietary technology with advances in cabinet assembly techniques. They are designed and built to withstand the environmental stresses placed on an outdoor loudspeaker. They will sound good and look good no matter what Mother Nature does to t
Resumen del contenido incluido en la página 4
FEATURES & BENEFITS FEATURES & BENEFITS GeoRealistic™ Styling Traditionally, rock speakers have looked like ornaments and not like rocks. Each RS6 style has unique textures and colors that are fashioned after natural rocks. Shaped grilles match the features on the front of the rock, making them blend into the cabinet. All of this extra attention to detail leads to a GeoRealistic™ style that enables the RS6 to blend in with other landscaping and disappear. All that will be noticed is the great so
Resumen del contenido incluido en la página 5
FEATURES & BENEFITS Precision Crossover A customized electronic dividing network inside the cabinet precisely distributes the music to the woofer and the tweeter. The three-pole two-way design of the RS6 crossover provides excellent stereo imaging, low distortion and superior sonic performance. ConeForward™ Design Most competitive rock speaker manufacturers mount their drivers from inside the cabinet. This moves the front of the driver inside the cabinet creating a tunnel for the driver to play
Resumen del contenido incluido en la página 6
INSTALLATION CONSIDERATIONS INSTALLATION CONSIDERATIONS Tools and Materials Required • A wire stripper • 1/2" PVC conduit (optional) • PVC conduit glue and cleaner (optional) • PVC cutting tool • Trench digger or shovel • Tube of silicon sealant (optional) • Cable (length and type determined by installation site – see “Choosing the Speaker Cable”) Selecting the number and location for your speakers The RS6 loudspeaker can be installed directly on the ground, in a flowerbed, on a wood deck or on
Resumen del contenido incluido en la página 7
INSTALLATION CONSIDERATIONS Figure 1 shows how this would work for a square area of 35 feet by 25 feet and using stereo signals. Using our spacing rules as shown in Table 1, leads to the need for four loudspeakers. The loudspeaker coverage pattern is shown in the diagram. Figure 2 Stereo Coverage 6 speakers Figure 2 shows the same area as Figure 1, however the number of speakers has increased by 2. You can see a greater area of stereo coverage and this would also have a more even sound level
Resumen del contenido incluido en la página 8
INSTALLATION CONSIDERATIONS RS6 Figure 3 Mono Coverage 4 speakers Figure 3 shows the difference in coverage area using the spacing rules for mono signals. Using the same four speakers as we did in Figure 1, we can increase our coverage area from 875 square feet (81.3 sq. meters) to 1400 square feet (130.1 sq. meters), simply by using a mono source. The trade off in sound quality between mono sources and stereo sources is sonic imaging. If you are concerned with keeping the instruments and vo
Resumen del contenido incluido en la página 9
INSTALLATION CONSIDERATIONS • You will need 2-conductor speaker cable that clearly identifies each conductor in the cable. If burying your cable in the ground is required, use cable rated for direct burial or run cable through PVC pipe. Always use moisture resistant cable. • After calculating the length of cable needed for each speaker, use the furthest length cable to determine the gauge (thickness) of speaker wire to use: Wire Gauge Maximum Distance 16 . . . . . . . . . . . .60 ft (18 m) 14 .
Resumen del contenido incluido en la página 10
INSTALLATION CONSIDERATIONS Figure 5 Two Zone Volume Control Wiring Volume controls provide flexibility and customization to make the system reliable and easy to use. Consult your local Niles’ dealer for more information about using volume controls. Recommended Amplifier Power We recommend an amplifier with a power rating of ten to one hundred fifty watts per channel for optimum performance. Outdoor speakers typically require more power than indoor speakers. The outdoor environment is usually n
Resumen del contenido incluido en la página 11
INSTALLATION INSTALLATION Run the speaker cable Determine the location of the amplifier that will power the loudspeakers. The amplifier should be located in an area that protects it from the weather. Refer to the amplifier installation instructions to ensure that the amplifier is not located in an area that does not meet its recommended operating environment. Once the location of the amplifier is determined, layout and place the loudspeakers in the area where music is desired. Use the procedu
Resumen del contenido incluido en la página 12
INSTALLATION 4. Connect one stripped end of the speaker cable coming from the amplifier to the RS6 connection cable’s red wire. To connect the two wires, twist the stripped ends of the wire together and screw down the wire nut on the twisted wires. The material inside the wire nut will protect the stripped ends of the wire. However, if added protection is desired, place a large amount of silicon sealant so the bottom of the wire nut is encased and sealed. Pay attention to the markings on the spe
Resumen del contenido incluido en la página 13
INSTALLATION 1. Point the speakers at each other, rather than at the area you want to cover. 2. Play some music with the amplifier or receiver set to Mono. 3. Stand so you are the same distance from each speaker and listen to the richness of the bass and the loudness of the sound. 4. Turn off the amplifier and reverse the connections on one speaker only. 5. Repeat the listening test with the same setting of the volume controls. If the current sound has a richer bass and is slightly louder than
Resumen del contenido incluido en la página 14
INSTALLATION Installing the Security Bracket and Cable 1. With the loudspeaker in the proper location per the layout, turn the loudspeaker over so the bottom of the loudspeaker is facing you, as shown in Figure 7. Figure 7 Bottom of Loudspeaker 2. Take the nylon security cable, supplied with the loudspeaker and fold it in half. Using the middle of the cable, feed it through the Security Attachment Eyelet as shown in Figure 8. Figure 8 Security Cable in Eyelet 3. Feed the opposite end of the nyl
Resumen del contenido incluido en la página 15
INSTALLATION 4. Pull the ends of the security cable with the loops as tight as you can until the knot around the security eyelet is tightened as shown in Figure 11. Figure 11 Security Cable Connected and Tightened 5. Feed the Security Stake through the loops at the end of the security cable and insure that they are inserted into the cable holder provided at the top of the stake, as shown in Figure 12. Figure 12 Security Stake Attachment to Cable 6. Pick a spot in the ground which the loudspeak
Resumen del contenido incluido en la página 16
INSTALLATION Upgraded Security Attachment Method (Optional) To perform this attachment method you will need the following items: 1. (1) Stainless Steel Eyebolt 2. (1) Concrete Anchor sized to the Stainless Steel Eyebolt 3. (1) Bag of Quikcrete – fast drying cement mix or equivalent 4. A post hole digger or shovel 5. (1) Stainless Steel Aircraft Cable 1/8" diameter or larger 6. (2) Stainless steel wire rope clamps sized to the aircraft cable chosen To install an upgraded security system: 1. Pre
Resumen del contenido incluido en la página 17
INSTALLATION Rock Speaker Aircraft Cable Eyelet Concrete Anchor Wire Rope Clamps Figure 14 Upgraded Security Attachment Final Adjustments Now that the loudspeaker’s phase, operation and security is assured, there are some final steps to ensure that the loudspeakers installation is complete and that they are used at there full potential. 1. Cover any trenches or wires that are still open or exposed. 2. Point the loudspeakers per the layout and verify that the sound is even and consistent througho
Resumen del contenido incluido en la página 18
OPERATION OPERATION Listening at Higher Volumes Outdoors there are no walls to reflect and contain the sound and typically the ambient noise level is louder. This causes the system to require more power to achieve a reasonable listening level than it does when you are listening indoors. In addition, you are frequently further away from the loudspeaker. It is possible to turn the volume so high that the amplifier runs out of power. This creates “clipping” distortion. Clipping distortion make
Resumen del contenido incluido en la página 19
SPECIFICATIONS SPECIFICATIONS Recommended Amplifier Power 10 to 150 Watts Nominal Impedance 8 Ohms Frequency Response 60 Hz to 21kHz Sensitivity 89 decibels for 2.83 Volts RMS of Pink Noise, measured at 1 Meter on Axis Wiring Requirements 2-conductor direct burial cable at the following sizes depending on longest length of cable required: Wire Gauge Maximum Distance 16 . . . . . . . . . . . .60 ft (18 m) 14 . . . . . . . . . . . .100 ft (30 m) 12 . . . . . . . . . . . .160 ft (50 m) Temperature
Resumen del contenido incluido en la página 20
NOTES NOTES _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ ______________________________________________________
