Resumen del contenido incluido en la página 1
4-130-181-12(1)
Wireless Stereo
Headset
Operating Instructions
DR-BT101
©2009 Sony Corporation
DR-BT101_4-130-181-12(1)
Resumen del contenido incluido en la página 2
WARNING To reduce the risk of fire or electric Notice for customers: the following shock, do not expose this apparatus to information is only applicable to rain or moisture. equipment sold in countries applying EU directives To reduce the risk of electrical shock, do The manufacturer of this product is Sony not open the cabinet. Refer servicing to Corporation, 1-7-1 Konan Minato-ku Tokyo, qualified personnel only. 108-0075 Japan. The Authorized Representative for EMC and product safety
Resumen del contenido incluido en la página 3
Disposal of Old Electrical & Disposal of waste batteries Electronic Equipment (applicable in the (Applicable in the European Union and other European Union and other European countries with European countries with separate collection separate collection systems) systems) This symbol on the battery or on the This symbol on the product or on its packaging indicates that the battery provided packaging indicates that this product shall with this product shall not be treated as not be treated
Resumen del contenido incluido en la página 4
DR-BT101_4-130-181-12(1)
Resumen del contenido incluido en la página 5
Table Of Contents What is Bluetooth wireless technology? .........................6 Welcome! ..................................7 3 steps to Bluetooth function ...........8 Location and Function of Parts ......................................9 Charging the unit.................. 10 Pairing ................................... 12 What is pairing? ..............................12 Procedures of pairing .....................12 Wearing the unit ................... 1 Indications of Bluetooth funct
Resumen del contenido incluido en la página 6
What is Bluetooth wireless technology? phone/Operating the phone. Bluetooth® wireless technology is a 2 – HFP (Hands-free Profile)* : Talking on short-range wireless technology that the phone/Operating the phone by enables wireless data communication hands-free. between digital devices, such as a 1 * Enhanced Data Rate computer or digital camera. Bluetooth 2 * When you use a Bluetooth mobile phone wireless technology operates within a supported by both HFP (Hands-free range of about 10
Resumen del contenido incluido en la página 7
Welcome! Thank you for purchasing this Sony Wireless Stereo Headset. This unit uses Bluetooth wireless technology. Enjoy music wirelessly from Bluetooth Stereo-enabled music players and mobile
=> 1 phones.* Embedded microphone enables hands-free conversation from Bluetooth-
=> 2 enabled mobile phone.* Enjoy basic remote control operation (play, stop, etc.) of music player functions
=> 3 via Bluetooth connection.* 4 Bluetooth version 2.1 + EDR* for higher quality audio with less interferen
Resumen del contenido incluido en la página 8
st eps to Bluetooth function Pairing First, register (“pair”) a Bluetooth device (mobile phone, etc.) and this unit with each other. Once pairing is established, there is no need for pairing again. Bluetooth Wireless Stereo mobile phone, Headset etc. Pairing Page 12–13 Listening to music Calling Bluetooth connection Bluetooth connection Operate the Bluetooth device to When the unit is turned on, the make the Bluetooth connection. unit starts making the Bluetooth connection to the
Resumen del contenido incluido en la página 9
GETTING STARTED Location and Function of Parts Headband Multi function button Controls various call functions. Left ( ) unit Right ( ) unit PAIRING button POWER button VOL (volume) +*⁄– buttons Microphone Indicator (blue) Indicates the communication USB( ) jack status of the unit. RESET button Indicator (red) * This button has a tactile dot. Indicates the power status of the unit. Jog switch Controls various functions when listening to music. 9 DR-BT101_4-130-181
Resumen del contenido incluido en la página 10
Charging the unit The unit contains a rechargeable Lithium-Ion battery, which should be charged before using for the first time. Notes 1 Open the cover of the USB ( ) If this unit is not used for a long time, the
=> jack. indicator (red) may not light up when you connect the USB cable to charge this unit. In 2 Connect the supplied USB ( ) this case, do not disconnect the USB cable cable to the unit, and then from the unit and wait until the indicator (red) lights up. connect the othe
Resumen del contenido incluido en la página 11
Caution Usage hours* If this unit detects a problem while Status Approx. charging, the indicator (red) may turn usage hours off, although charging is not complete. Communication time 13 hours Check for the following causes: (including music – Ambient temperature exceeds the playback time) (up to) range of 0 °C – 40 °C. Standby time (up to) 200 hours – There is a problem with the battery. In this case, charge again within the * Time stated above may vary, depending on above-mentioned temper
Resumen del contenido incluido en la página 12
Pairing What is pairing? Procedures of pairing Bluetooth devices need to be “paired” 1 Place the Bluetooth device with each other beforehand. within 1 m of this unit. Once Bluetooth devices are paired, there is no need for pairing again, 2 Press and hold the PAIRING except in the following cases: button for 2 seconds or more to Pairing information is deleted after
=> standby for pairing while the repair, etc. unit is turned off. This unit is paired with 9 or more
=> devices. This unit
Resumen del contenido incluido en la página 13
Perform pairing procedure on 6 Start the Bluetooth connection the Bluetooth device to detect from the Bluetooth device. this unit. This unit memorizes the device as the last connected device. Some The list of detected devices appears Bluetooth devices may connect on the display of the Bluetooth with the unit automatically when device. This unit is displayed as pairing is complete. “DR-BT101.” If “DR-BT101” is not displayed, repeat from step 1. Tips To pair with other Bluetooth devic
Resumen del contenido incluido en la página 14
Wearing the unit 1 Extend the headset to adjust the length. 2 Put the unit with indication on your left ear and indication on your right ear, then place the headset over your head. 1 DR-BT101_4-130-181-12(1)
Resumen del contenido incluido en la página 15
Indications of Bluetooth function : Indicator (blue) : Indicator (red) Status Flashing patterns Searching … — — — — — — — — … — — — — — — — — Connectable … —— —— —— —— —— — Connecting … —— —— —— —— —— … —— —— —— —— —— HFP/HSP or A2DP … ————————— ————— (standby for receiving audio signal) — HFP/HSP and A2DP … — ——————— — ——— (standby for receiving audio signal) — Listening … ———————— ———— — Listening during standby … ——————— ——— for telephone call — Incomi
Resumen del contenido incluido en la página 16
OPERATING THE UNIT Listening to music make the last connected Bluetooth device VOL + button ready for HFP or HSP connection. To make or receive a call while playing back VOL – button music, see page 22. POWER button 2 Make the Bluetooth connection (A2DP) from a Bluetooth device to this unit. Refer to the operating instructions supplied with the Bluetooth device Jog switch on how to operate it. Start playback on the Bluetooth device. This unit supports SCMS-T content Tip protection. Yo
Resumen del contenido incluido en la página 17
To adjust the volume Controlling the audio Press the VOL+/– button while device – AVRCP listening to music to adjust the volume. Tips If the Bluetooth audio device connected Depending on the connected device, it
=> with this unit supports AVRCP (Audio may be necessary to adjust the volume on Video Remote Control Profile), you the connected device as well. can control by using the unit buttons. Volume for calling and listening to music
=> Refer to the operating instructions can be adjust
Resumen del contenido incluido en la página 18
Tip Depending on the Bluetooth device, the fast- forward or fast-rewind operation can be done by performing the following procedures on this unit. 1 Press and hold the POWER button for about 2 seconds to turn off the unit. 2 Press and hold the POWER button and jog switch ( ) for about 7 seconds. The indicator (blue) flashes once. The setting can be released by repeating the above procedures. At this time, the indicator (blue) flashes twice. Note You cannot adjust the volume of the
Resumen del contenido incluido en la página 19
Calling When this unit does not VOL + button connect to a Bluetooth mobile phone automatically VOL – button You can make a connection by POWER button operating Bluetooth mobile phone or by operating this unit to connect the last connected Bluetooth device. Multi function To make a connection by button operating Bluetooth mobile Check the following before operating phone the unit. 1 Make the Bluetooth connection – The Bluetooth function is active on (HFP or HSP*) from the the mobi
Resumen del contenido incluido en la página 20
– ring tone set on the unit To make a connection with – ring tone set on the mobile the last connected Bluetooth phone device by operating this unit – ring tone set on the mobile phone only for Bluetooth 1 Press the multi function button. connection The indicator (blue) and indicator Note (red) start flashing at the same If you received a call by pressing the time, and the unit performs the button on the Bluetooth mobile phone, connection operation for about 5 some Bluetooth mobile
